BR178 - Fridge BORETTI - Free user manual and instructions
Find the device manual for free BR178 BORETTI in PDF.
| Brand | BORETTI |
| Model | BR178 |
| Product type | Built-in refrigerator |
| Dimensions (H x W x D) | 1780 x 560 x 550 mm |
| Electrical supply | 220-240 V / 50 Hz |
| Climate class | SN-ST (from +10°C to +38°C) |
| Refrigerator capacity | Approximately 200 L (estimation) |
| Noise level | Not specified |
| Energy consumption | Not specified |
| Main functions | Refrigeration, Shopping function, open door alarm, automatic defrost |
| Temperature adjustment | Mechanical thermostat, continuous adjustment |
| Interior lighting | Replaceable bulb (max power indicated on the diffuser) |
| Shelves | Removable and height-adjustable |
| Door balconies | Positionable |
| Vegetable drawer | Yes |
| Door opening | Reversible (supplied right-hand opening) |
| Maintenance | Clean interior with warm water and bicarbonate; dust the condenser |
| Safety | Unplug before cleaning; do not use metal objects; do not modify the refrigeration circuit |
| Spare parts and repairability | Original parts available from after-sales service; repairs by qualified personnel |
| Installation | Requires ventilation; wait 2 hours before first use |
| Refrigerant | Hydrocarbons (maintenance by authorized personnel) |
| Weight | Not specified (estimate ~55 kg) |
Frequently Asked Questions - BR178 BORETTI
User questions about BR178 BORETTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Fridge in PDF format for free! Find your manual BR178 - BORETTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BR178 by BORETTI.
USER MANUAL BR178 BORETTI
Geen symbol :normale werking.
Het uitschakelen
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death-trap for a child.
These warnings are provided in the interest of safety. You must read them carefully before installing or using the appliance.
General Safety
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
It is dangerous to alter the specifications or modify this product in any way. - Before any cleaning or maintenance work is carried out, be sure to switch off and unplug the appliance.
- This appliance is heavy. Care should be taken when moving it
- Ice lollies can cause frost burns if consumed straight from the appliance.
Take utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages. - The appliance must not be located close to radiators or gas cookers.
- Avoid prolonged exposure of the appliance to direct sunlight.
- There must be adequate ventilation round the back of the appliance and any damage to the refrigerant circuit must be avoided.
- For freezers only (except built-in models): an ideal location is the cellar or basement.
- Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances.
Service/Repair
- Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person
This product should be serviced by an authorized Service Centre, and only genuine spare parts
should be used.
- Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or more serious malfunctioning. Refer to your local Service Centre, and always insist on genuine spare parts.
- This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.
Use
- The domestic refrigerators and freezers are designed to be used specifically for the storage of edible foodstuffs only.
- Best performance is obtained with ambient temperature between +18^ and +43^ (class T); +18^ and +38^ (class ST); +16^ and +32^ (class N); +10^ and +32^ (class SN). The class of your appliance is shown on its rating plate.
Warning: when the ambient temperature is not included within the range indicated for the class of this appliance, the following instructions must be observed: when the ambient temperature drops below the minimum level, the storage temperature in the freezer compartment cannot be guaranteed; therefore it is advisable to use the food stored as soon as possible.
- Frozen food must not be re-frozen once it has been thawed out.
Manufacturers' storage recommendations should be strictly adhered to. Refer to relevant instructions. -
The inner lining of the appliance consists of channels through which the refrigerant passes. If these should be punctured this would damage the appliance beyond repair and cause food loss. DO NOT USE SHARP INSTRUMENTS to scrape off frost or ice. Frost may be removed by using the scraper provided. Under no circumstances should solid ice be forced off the liner. Solid ice should be allowed to thaw when defrosting the appliance.
-
Do not place carbonated or fizzy drinks in the freezer as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.
Installation
- During normal operation, the condenser and compressor at the back of the appliance heat up considerably. For safety reasons, minimum ventilation must be as shown in the instructions.
Attention: keep ventilation openings clear of obstruction. - Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
Important: if the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. - If the appliance is transported horizontally, it is possible that the oil contained in the compressor flows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to flow back in the compressor.
- There are working parts in this product which heat up. Always ensure that there is adequate ventilation as a failure to do this will result in component failure and possible food loss. See installation instructions.
- Parts which heat up should not be exposed. Wherever possible the back of the product should be against a wall.
Environment Protection
This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from municipal authorities. The materials used on this appliance marked by the symbol are recyclable.
Disposal of old Appliances
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
CONTENTS
Warnings 25
Use - Cleaning the interior - Control panel - Display 27
Use - Operation - Activation of functions - Switching off - Temperature regulation - Shopping Function . . . .
Door open acoustic alarm - Fresh food refrigeration 28
Use - Movable shelves - Positioning the door shelves - Hints - Hints for refrigeration 29
Maintenance - Periods of non-operation - Periodic cleaning - Interior light - Defrosting 30
Customer service and spare parts - Installation - Location - Shelf holders 31
Installation - Electrical connection - Door reversibility 32
Installation-Building-in instructions 33
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.
Control panel
Do not use detergents or abrasive powders, as these will damage the finish.
A - Applince button ON/OFF
B - Temperature and function indicator
C - Function button / reset alarm
D - Fridge Thermostat knob
DISPLAY
- Door open alarm indicator
- Positive or negative Temperature indicator
- Temperature indicator
- If on the shopping function is on
Operation
After plugging the plug into the power outlet, if the display is not illuminated, press key (A), appliance on.
As soon as the appliance is turned on, the following signals will appear on the control panel:
symbol (2) will be positive, indicating that the temperature is positive.
Place the refrigerator adjustment knobs (D) in a middle position, and the appliance will be set up to provide the following temperature:
roughly +5^ in the refrigerator.
Temperature regulation
The temperature is automatically regulated and can be increased to achieve a higher temperature (warmer) by rotating the thermostat knob toward settings or reduced (colder) rotating the knob towards settings.
However, the exact setting should be chosen keeping in mind that the temperature inside the refrigerator depends on:
- room temperature;
how often the door is opened;
the quantity of food stored; - location of appliance.
We suggest placing the knob in the middle position to obtain an internal temperature of approximately +5^ .
Important
If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall. In this case the dial must be set to a higher temperature to allow automatic defrosting and therefore reduced energy consumption.
Activation of functions
Each time key C is pressed, the following functions are activated in a clockwise direction:
Symbol 4: shopping function
No Symbol: Normal operation
Switching off
The appliance is shut off by holding down key (A) for more than 1 second. After this, a countdown of the temperature from -3 -2 -1 will be shown.
When the appliance is shut off, display (B) also goes off.
Shopping Function
If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest activating the Shopping function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator and/or freezer.
The shopping function is activated by pressing key C (several times if necessary) until the corresponding
icon appears
The shopping function shuts off automatically after approximately 6 hours.
It is possible to de-activate the function at any time by pressing key C (see paragraph "Function Activation").
Door open acoustic alarm
An acoustic alarm will sound when the door is left open for around 5 minutes.
The door open alarm conditions are indicated by:
- flashing symbol (1);
- red display illumination;
- beeping sound.
Press the button (C) to stop the acoustic alarm.
When normal conditions are restored (door closed):
- the acoustic alarm will stop.
Fresh food refrigeration
To obtain the best performance:
- do not store warm food or evaporating liquids in the refrigerator;
- do cover or wrap the food, particularly if it has a strong flavour.
- Position food so that air can circulate freely round it.
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.
Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be placed at different heights.
To make these adjustments proceed as follows: Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.
iHINTS
Hints for refrigeration
Useful hints:
Meat (all types): wrap in polythene bags and place on the glass shelf above the vegetable drawer.
For safety, store in this way only one or two days at the most.
Cooked foods, cold dishes, etc... these should be covered and may be placed on any shelf.
Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer(s)
provided.
Butter and cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be stored in the bottle rack on the door.
Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.
MAINTENANCE
Unplug the appliance before carrying out any maintenance operation.
Warning
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.
Periodic cleaning
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added.
Clean the inside with warm water and bicarbonate of soda.
Rinse and dry thoroughly.
Clean the condenser (black grill) and the compressor at the back of the appliance with a brush or a vacuum cleaner. This operation will improve the performance of the appliance and save electricity consumption.
Interior light
If it becomes necessary to replace the lamp, press on the rear hook and at the same time slide the cover in the direction indicated by the arrow.
Attention:
Replace the lamp with one of the same power (the maximum power is shown on the light diffuser).
Defrosting
Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates.
It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole.
Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:
remove the plug from the wall socket;
remove all food;
defrost and clean the interior and all accessories;
leave the door ajar to allow air to circulate to prevent unpleasant smells.
Important:
Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.
Do not use a maechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer.
CUSTOMER SERVICE AND SPARE PARTS
If the appliance is not functioning properly, check that:
- the plug is firmly in the wall socket and the mains power switch is on;
- there is an electricity supply (find out by plugging in another appliance);
- the thermostat knob is in the correct position.
-
If there are water drops on the bottom of the cabinet, check that the defrost water drain opening is not obstructed (see "Defrosting" section).
-
If your appliance is still not working properly after making the above checks, contact the nearest service centre.
To obtain fast service, it is essential that when you apply for it you specify the model and serial number of your appliance which can be found on the guarantee certificate or on the rating plate located inside the appliance, on the bottom left-hand side.
INSTALLATION
Location
The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.
For building into kitchen units follow the special "Building-in" instructions given.
Shelf holders
Your appliance is equipped with shelf retainers that make it possible to secure the shelves during transportation.
To remove them proceed as follows:
Move the shelf holders in the direction of the arrow, raise the shelf from the rear and push it forward until it is freed and remove the retainers.
Attention
It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ± 6% of the rated voltage.
For operation with different voltages, a suitably sized auto-transformer must be used.
The appliance must be earthed.
The power supply cable plug is provided with a contact for this purpose.
If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a specialist technician.
The Manufacturer declines all responsibility if the above safety precautions are not observed.
This appliance complies with the following E.E.C.Directives:
- 87/308 EEC of 2/6/87 relative to radio interference suppression.
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
Door Reversibility
The appliance is supplied with the door opening to the right.
For door opening in the opposite direction, perform the following actions prior to installation
- Unscrew the upper pin and remove the spacer
- Remove the door.
- Unscrew with a key the lower pin and replace it on the opposite side.
- Reinsert the door, refit the spacer and rescrew the upper pin on the opposite side.
Instructions for totally built-in appliances
Dimensions of the recess
Height (1) 1780 mm
Depth (2) 550 mm
Width (3) 560 mm
For safety reasons, minimum ventilation must be as shown in Fig.
Attention: keep ventilation openings clear of obstruction.
Furthermore, it is necessary that the niche is provided with a conduct of ventilation having the following dimensions:
depth 50 mm
width 540 mm
Drill the unit using a 0.25mm drill (10 mm max. penetration);
Fix the square fitting to the appliance.
Make sure that a distance of 44mm is maintained in the lower part between the kitchen furniture and the border of the appliance.
The lower hinge cover inserted in the accessories bag, is useful to guarantee the exact position of the kitchen furniture and the appliance.
Also make sure that the appliance does not clamp the mains cable
Fasten the appliance with 4 screws provided in the kit included with the appliance
Press in the joint covers between the appliance and the kitchen unit.
From the plastic cover (E), which is used to cover the hinge with the pivot pin, you must take away the part as indicated in the drawing.
This operation is made easier since there is, in the internal part of the cover hinge lid a groove that facilitates the removal of this coomponent.
"Remove the part marked with DX, if the pivot pin is inserted in the right hinge, SX in opposite case."
Apply covers (C-D) on joint cover lugs and into hinge holes.
Snap vent grille (B) and hinge covers (E) into position.
Separate parts Ha, Hb, Hc, Hd as shown in the figure
Place guide (Ha) on the inside part of the furniture door, as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied.
Fix cover (Hc) on guide (Ha) until it clips into place.
Open the appliance door and the furniture door at 90^ . Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes as indicated in the figure. Remove the squares and drill holes with 2mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied.
Should the lining up of the furniture door be necessary, use the clearance of slots.
At the end of operations, it is necessary to check if the door of the furniture closes properly.
Fix cover (Hd) on guide (Hb) until it clips into place.
These warnings would be given to the Schutz under his command. The Schutz would be given to him in return, and he would be given to him in return.
