CONNECT 310 - HDMI switch MARMITEK - Free user manual and instructions

USER MANUAL CONNECT 310 MARMITEK

• To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose the components to rain or moisture. Do not use the product close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright light sources.
• In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
• Do not open the product (battery panel excepted): the device may contain live parts. The product should only be repaired or serviced by a qualified expert.
• Keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never use old and new batteries or different types of batteries together. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion.
• Only connect the adapter to the mains after checking whether the mains voltage is the same as the values on the identification tags. Never connect an adapter or power cord when it is damaged. In that case, contact your supplier.

INTRODUCTION

Congratulations on purchasing the Marmitek Connect310! With this you can connect up to 3 HDMI sources to your (HD-) TV with just one cable, without any loss of signal or encryption. Examples of HDMI sources are: HD-DVD player, Blu-ray DVD player, HD-Set top Box, PlayStation3, Xbox 360, etc. The Connect310 supports resolutions up to 1080p.

The Marmitek products are manufactured with the utmost precision and are of high quality. Please read this manual first and follow the instructions so you can enjoy the possibilities of this product optimally.

SET CONTENTS

1x HDMI Switcher
1x Remote control (battery included)
1x Power adaptor
1x Infrared receiver
1x User manual

ADVANTAGES

Connect310

• Connecting 3 HDMI sources with one cable
  Supports up to 1080P HDTV resolution
• HDMI V1.3 certified by ATC (Authorized Test Centers)
• Meets the HDCP standards (High-bandwidth Digital Content Protection)
• Can be placed out of sight and can still be operated with the remote control when using the external infrared receiver.

HDMI V1.3

Video bandwidth 225 MHz (makes image reproduction of 1080P, 12-bit and 60Hz possible)
- Deep Color 12-bit (billions instead of millions colours, better reproduction of subtle differences in gradation and a higher contrast ratio)
- Dolby TrueHD & DTS HD Master Audio (high quality audio support)
- Lip-Sync (prevents synchronisation problems between image and sound)
- CEC (operate multiple 'CEC' devices with just one remote control).

INSTALLATION

1. Connect the HDMI cable to your screen (TV, monitor of projector) with the "HDMI output" of the Connect310.
2. Connect the HDMI cables from your sources to the "HDMI inputs" of the Connect310.
3. Connect the external infrared receiver to the "IR Extender" input of the Connect310 and mount it somewhere in sight of your remote control. For example up, under or at the side of your A/V centre. This way you can keep operating the Connect310, even when it is located in a closed cabinet.
4. Connect the power adaptor to the power connector of the Connect310 and connect to the mains.

Remark 1:

In most cases the Connect310 operates without power adaptor. Standard all HDMI cables are equipped with a 5V power pin, but unfortunately not all HDMI sources support this functionality. So it depends on your HDMI sources if connecting the power adaptor to the Connect310 is necessary. You can test this by simply disconnecting the power adaptor from the Connect310 and see if it is still functioning properly.

Remark 2:

Use only category 2 HDMI certified cables for the best quality in image and sound.

Battery

Remove the plastic strip from the battery compartment to activate the battery and use the remote control.

USING THE SWITCHER

Switching between the connected HDMI sources

Automatically

When one of the HDMI sources is switched on, the Connect310 will automatically switch to the correct input channel. If multiple HDMI sources are already switched on, the Connect310 will automatically switch to the last HDMI source activated.

Remark: Automatic switching has to be supported by the HDMI source.

With the selection button on the switcher

With the Select button at the top of the panel you can manually switch between the various HDMI sources.

With the remote control

Point the remote control at the external infrared receiver of the Connect310 and press the number that corresponds with the desired HDMI source.

The LED lighting on top of the panel shows which source is selected.

FREQUENTLY ASKED QUESTIONS

No (or poor) image and sound

If you experience poor or no image after connecting the HDMI switcher, try to recover the problem by connecting the devices one at the time to your screen (TV, monitor or projector). This way you can determine whether the problem lies with the HDMI sources, the HDMI cables, the HDMI switcher or the screen. HDMI devices which are not tested and certified by ATC (Authorized Test Centers) can cause image and sound problems.

• Check if the power adaptor of the Connect310 is connected and plugged into the mains.
• Use HDMI certified cables of the highest quality (category 2 HDMI certified).
• Do not use HDMI cables that are longer than specified in the technical data.
• Both the HDMI source and your screen have to support HDMI fully.
• Check whether your HDMI sources, DVI device and screen support the copy protection HDCP (High-bandwidth Digital Content Protection).

Remote control does not work

• You should point the remote control at the external infrared receiver, not at the switcher.
• Infrared signals have a maximum reach of approximately 10 metres. Try a shorter distance.
• Replace the battery in the remote control, it could be empty.

Do you still have questions? Please check out www.marmitek.com for more information.

TECHNICAL DATA

Resolution

Supported HDTV Resolutions 480p, 576i, 576p, 720p, 1080i, 1080p

Supported PC Resolution (max) 1920 x 1200

Maximal Pixel Frequency (max) 225 MHz

Maximal Bit Rate (max) 2.25 Gbps

In- and outputs

HDMI Input (19-pin female) 3 HDMI

HDMI Output (19-pin female) 1 HDMI

Maximal HDMI cable length 15 metres

Remote control

Infrared remote control Battery included CR2025

Housing Switcher

Dimensions (H x W x D) 80 x 18 x 58mm

Weight 250g

Ambient

Ambient temperature +0 to +40^

Ambient humidity 10% to 85%

Power

External power adaptor Input: 100-240VAC @50-60Hz Output: 5VDC @ 300mA

Specifications may be modified without prior notice.

OPTIONAL ACCESSORIES

Infrared extension

Marmitek offers several products to operate your devices, even when these are placed in a closed cupboard or in a different room. This as well wired as wireless. More information about these so called infrared extenders can be found at www.marmitek.com.

Extra remote control

If you want to operate your device from various places in your home, or if you want to use just one single remote control for all your A/V devices, then make your choice from the complete range of Marmitek universal remote controls; EasyControl or EasyTouch. These replace almost

every remote control you are using at the moment. More information about these so called universal remote controls can be found at www.marmitek.com

Environmental Information for Customers in the European Union

European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose

of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.

SICHERHEITSHINWEISE

Dimensions (H x L x P) 80 x 18 x 58 mm

Poids 250g

Environnement

Dimensiones (L x A x P) 80 x 18 x 58mm

Peso 250g

Ambiente

Temperatura ambiental 0 a +40°C

Humedad ambiental 10% a 85%

Alimentación

Adaptador de alimentacion externo Input: 100-240VAC @50-60Hz

Output: 5VDC @ 300mA

Las specifications peuvent modifierse sin previo aviso.

TÁMBIÉN A LA VENTA

Extension infrarroja

Dimensioni (A x L x P) 80 x 18 x 58 mm

Peso 250g

Ambiente

Temperatura ambiente +0 ai +40^

Output: 5VDC @ 300mA

VEILIGHEIDSWAARSCHUWINGEN

DECLARATION OF CONFORMITY

Hereby, Marmitek BV, declares that this Connect310 is in compliance with the essential requirements and other relevant provisions of the following Directives:
DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility
Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits
Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
Hiermit erklart Marmitek BV die Übereinstimmung des Gerätes Connect310 den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinien:
RICHLINIE 2004/108/EG DES EUROPAISCHEN PARLIaments UNS DES RATES vom 15. Dezember 2004 zur Angleichung der Rechtsvorschriften der Mitgliedstatesen über die elektromagnetische Verträgelichkeit
Richtlinie 2006/95/EG des Europäischen Parlaments und des Rates vom 12. Dezember 2006 zur Angleichung der Rechtsvorschriften der Mitgliedstaaten betreffend elektrische Betriebsmittel zur Verwendung innerhalb bestimmter Spannungsgrenzen
Richtlinie 2002/95/EG des Europäischen Parlaments und des Rates vom 27. Januar 2003 zur Beschränkung der Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten
Par la presente Marmitek BV déclare que l'appareil Connect310 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directives:
DIRECTIVE 2004/108/CE DU PARLEMENT EUROPEEN ET DU CONSEIL du 15 décembre 2004 relative au rapprochement des legislations des États membres concernant la compatibilité electromagnétique
Directive 2006/95/CE du Parlement européen et du Conseil du 12 décembre 2006 concernant le rapprochement des législations des États membres relatives au matériel électrique destiné à être employé dans certaines limites de tension
Directive 2002/95/CE du Parlement européen et du Conseil du 27 janvier 2003 relative à la limitation de l'utilisation de certaines substances dangereuses dans les équipements électriques et électroniques

Copyrights

Marmitek is a trademark of Marmidenko B.V. Connect310 is a trademark of Marmitek B.V.

Home Networks is a registered trademark of Marmitek B.V.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

PlayStation is a trademark of Sony Computer Entertainment Inc.

Xbox is a trademark of the Microsoft Corporation. All rights reserved.

Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the Content, but without limitation, distribution, reproduction, modification, display or transmission without the prior written consent of Marmitek is strictly prohibited. All copyright and other proprietary notices shall be retained on all reproductions.

DECLARATION OF CONFORMITY

Marmitek BV declara que este Connect310 cumple con las exigencias esenciales y con las cuales reglas relevantes de la directriz:
DIRECTIVA 2004/108/CE DEL PARLAMENTO EUROPEO Y DEL CONSEJO de 15 de días de 2004 relativa a la aproxima de las legislaciones de los Estados miembrlos en materia de compatibiliad electromagnética
Directiva 2006/95/CE del Parlamento Europeo y del Consejo de 12 de días de 2006 relativa a la aproxima de las legislaciones de los Estados miembros sobre el material electrico destinado a utiliser con determinados limites de tension
Directiva 2002/95/CE del Parlamento Europeo y del Consejo de 27 de enero de 2003 sobre restricciones a la realizacion de determinadas sustancias peligrosas en aparatos electricos y electronicos
Con ciò, Marmitek BV, dichiara che il Connect310 è conforme ai requisiti essenziali ed alter disposizioni relative alla Direttiva:
DIRITTIVA 2004/108/CE DEL PARLAMENTO EUROPEO E DEL CONSIGLIO del 15 dicembre 2004 concernente il ravicinamento delle legislazioni degli Stati membri relative alla compatibilità elettromagnetica
Direttiva 2006/95/CE del Parlamento europeo e del Consiglio del 12 dicembre 2006 concennte il ravincamento delle legislazioni degli Stati membri relative al materiale elettrico destinato ad essere adoperoatto entro taluni limiti di tensione
Direttiva 2002/95/CE del Parlamento europeo e del Consiglio del 27 gennaio 2003 sulla restrizione dell'uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche
Bij deze verklaart Marmitek BV, dat deze Connect310 voldoet aan de essentiele eisen en aan de overige relevante bepalingen van Richtlijnen:
RICHTLIJN 2004/108/EG VAN HET EUROPEES PARLEMENT EN DE RAAD van 15 decanber 2004 betreffende onderlinge aanpassing van de wetgevingen van de lidsten inzake elektramagnetische compatibiliteit
Richtlijn 2006/95/EG van het Europees Parlement en de Raad van 12 decanber 2006 betreffende de onderlinge aanpassing van de wettelijkke voorschriften der lidstaten inzake elektrisch materiaal bestemd voor gebruik boven bepaalde spanningsgrenzen
Richtlij 2002/95/EG van het Europees Parlement en de Raad van 27 januari 2003 betreffende beperking van het gebruik van bepalde gevaarlijke stoffen in elektrische en elektronische apparatusur

MARMITEK BV - P.O. BOX 4257 - 5604 EG EINDHOVEN - THE NETHERLANDS