MMR-77 - Portable radio SANGEAN - Free user manual and instructions

USER MANUAL MMR-77 SANGEAN

10 Illumination lamp
Rotary tuning
^12 Power and volume control
Hand strap holder
14 Earphone socket
DC jack for AC power adaptor
16 Battery/Dynamo switch
Battery compartment
18 Telescopic antenna

Power Supply

1. Battery operation

a. Open the battery compartment by pressing the marking and opening the lid.
b. Take out the used batteries by pulling the first one with your index finger. Then take out the second battery.
c. When inserting the new batteries (2 x 1.5V, type UM-3, AA or LR6), observe the correct polarity.

Note:

Take out the batteries when you know that the device won't be used for a long period of time . The manufacturer accepts no liability for damage from used batteries .

Environmental note:

Batteries, including those which contain no heavy metal, may not be disposed of with household waste.

Please dispose of used batteries in a environmentally sound manner. Find out about the legal regulations which apply in your area.

1. Mains operation (with 3V/200mA mains power adaptor, central positive in polarity)

a. plug the mains power adaptor (not supplied) into the DC jack socket (2.5 mm in diameter) on the left of the device.
b. The batteries in the compartment are switched off.

Note:

you can't charge the standard battery or rechargeable battery via Mains operation.

3. Dynamo power

Note:

You can charge the radio via Dynamo power either the battery switch in battery or dynamo position. The Dynamo charging is to the built-in dynamo battery not the battery in the battery compartment.

a. take out Dynamo power handle from it rest position.
b. rotary the Dynamo handle around 120 circles per minute speed, either clock or anti-clock wise until the charging LED indicator is on indicating charging condition.
c. Under normal listening condition, one minute charging can listen to the radio for around 30 minutes. (AM band and using speaker).
d. Make sure the handle in its rest position after charging completed.
e. You can dynamo charge the radio either radio in its on or off position.
f. Make sure the telescopic antenna to be in rest position before rotary the dynamo handle.

Note:

When plugged in AC power adaptor into DC jack, the dynamo charging won't be effective.

Note:

The built-in rechargeable battery for Dynamo power will last for 300-500 times of charging, therefore it's suggested to power the radio by standard battery or AC power adaptor (not supplied).

Radio operation

1. Select the power to be Battery (make sure the batteries are in and powerful) or Dynamo position by switching battery/dynamo switch.
2. Switch on the radio by turning the power/volume control.
3. Select required radio band (AM or FM).
4. For FM reception, pull out the telescopic antenna and rotary it until you receive the best signal. For AM, align the antenna by turning the radio for best reception and avoid interference from computer, electronics devices etc.
5. Adjust the volume by rotary volume control.

Listening with earphones

Insert the earphones plug (3.5 mm, stereo) into the earphones socket on the left side of the device. This will automatically switches off the loudspeakers.

Conditional water resistant

This radio is a water resistant device not a waterproof device, therefore make sure the rubber cover on earphones socket and DC jack are properly sealed after usage.

Illumination lamp

The radio equips with a illumination lamp, it can either illuminate the dial window or illuminate for short distance whenever is necessary. Simply press illumination button to switch on /off the illumination lamp either radio power is on or off.

Emergency buzzer

Press the Emergency Buzzer button will sound the emergency buzzer to let the people know that it's in emergency status or something like "I am here and need help". Press the button again to switch off the buzzer.

Note:

The Emergency buzzer can execute either radio is in on or off position.

Technical Data

Power Supply:

Battery operation 2x1.5V (type Mignon LR6/UM3/AA)

Mains operation 3V 300mA, mains power adaptor, center Pin Positive in polarity

Dynamo operation built-in 2 AAA size x 1.2V rechargeable

Battery

Output 100 mW

GB

Frequency Coverage

FM (VHF) 87.50 - 108 MHz

AM (MW) 526.5 - 1710 kHz

Antenna

Telescopic antenna FM (VHF)

Ferrite rod antenna AM (MW)

Socket

DC socket

2.5 mm in diameter, 3V 200 mA, center pin Positive.

Earphone jack

3.5 mm in diameter, stereo, 32 ohm Impedance

Dimensions and weight

167mm x 89mm x 52mm (WxHxD)

250g

If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste.

Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

(Waste Electrical and Electronic Equipment Directive)

Commands

(type crayon LR6/UM3/AA)

AM (MW) 526,5 - 1710 kHz

Antenne

Antenne telescopique FM (THF)

Antenne tige en ferrite AM (MW)

Prises

167mm x 89mm x 52mm (LxHxP)

250g

FM (VHF) 87.50 - 108 MHz

AM (MW) 526.5 - 1710 kHz

Antena

167mm x 89mm x 52mm (Anx AlxFondo)

250g

21

FM (VHF) 87.50 - 108 MHz

AM (MW) 526.5 - 1710 kHz

Antenne

Uittrekbare antenne FM (VHF)

Ferrier-staafantenne AM (MW)

Aansluiting

167mm x 89mm x 52mm (BxHxD)

250gr

NL

FM (VHF) 87,50 - 108 MHz

AM (MW) 526,5 - 1710 kHz

Antenne

Teleskopantenne FM (VHF)

Ferritstabantenne AM (MW)

Anschlüsse

DC-Buchse

2,5 mm Durchmesser, 3 V, 200 mA, positiver Mittenkontakt

Kopfhörerbuchse

3,5 mm Durchmesser, Stereo, 32 Ohm Impedanz

167mm x 89mm x 52mm (BxHxT),

250g