IMT702 - Bluetooth speaker ALTEC LANSING - Free user manual and instructions

USER MANUAL IMT702 ALTEC LANSING

Thank you for purchasing the Altec Lansing inMotion Max speaker system. Designed specfically to work with your iPhone and iPod, this system provides high-quality audio and radio performance that brings out the best in your music.

This Altec Lansing speaker system is designed to work with

+ iPod nano (2nd generation) +_iPod with video

«iPod nano (1st generation)

Pod nano (8rd generation) + iPod classic

Please carefully read this User Guide for instructions on setting up and using your inMotion Max speaker system

Prior to installing or operating the Altec Lansing inMotion Max speaker system, refer to the important product safety information.

The answers to most setup and performance questions can be found in the Troubleshooting section of this guide. You can also consult the frequentiy asked questions (FAQ) in the customer support section of our Web site at www.alteclansing.com,

If you le in North America and still can't find the information you need, please call our customer service team for assistance before returning this product to your retailer under their return policy.

Tel: 800-258-3288 (Tol Free in US and Canada) Email: csupport@alteclansing.com

If you live outside of North America, please visit our Web site at wwwalteclansing.com and select your region to locate your country's distributor.

For the most up-to-date information, be sure to check our Web site at wwwalteclansing.com.

International Distribution

International customers: For information regarding the distribution of Altec Lansing products in your country, please visit uwalteclansing.com and click on your region.

Registering Your Product

Visit wwwalteclansing.com to register your product online, so we can provide you with the best possible service and technical support.

Changes or modifications not expressiy approved by the party responsible for compliance could void the users authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received, including interference that may cause undesired operation.

ha igining flash with amonthead, within an equiateral tiange, Is intended t alert the user to 1h presence of uninsulated

“dangerous voltage” within the products enclosur that may be of

suficent magnitude 10 constiute a risk of ect shock 10 persons.

RECHARGEABLE BATTERY CAUTION: Danger f exoslon if battery is correct replaced. Raplace on with ne same or equivalent rype. Do nol expose to excessive heat Such as sunsñine, fre, or ne ke.

The battery use in this product must be proper recycled ar spasad of Instructions for remouing th battery can be found in he Gettng Star section. Pisase contact your local recyclng center fo proper attry handing and deposal instructions.

Rated votage: 2.7V | Capacity: 1800mAn Type: LC18660

CAUTION To prevent lei shock do noÏ use ins (palarzed plug with an extension cord, receptace or oiner out unless he bades can be llyinserted to prevent blade exposure.

WARNING To reduce tn rk offre or lt shack, do nt expose I applance Lo rain or oksUre.

Koop tnese instructions.

Folow al inetructions.

Do not use this apparatus near water TI apparus shall nt be exposed 10 cipping ar splasting, and no objects led th quds, such as vases, shal be placed on tne apparatus.

Giean onky with dry clth.

Do nat block any ventlation openings. instal accordance win he manufacturrs instructions. The apparatus should not be tue en à bed, sofa, rug or simlar surface Int may biock he ventation openings. The apparatus must nat be placed in à built instalation, suc as a closed bookcace or cabinet that may mpede the foto ar irough he ventltion operings. Ventlaton shauk not be imeaded by coverig Ia opanige vin lems such as nawrepapers, Iablecotns, curans, te.

Do not instal near any heat sources such as radialors, he rgsters, ses, r ot apparatus {nucing amplirs hat produce heat.

. No naked flame sources, such as ghted candies, shaud be placed on the apparatus.

CAUTION Caution: To prevent ne ik of elect shock, da not remove cover {or back. No user-sonicaahle pars inside. Refer Saricing 1 auaiid service personne.

The exclamaion paint wii an equlteral Mange is intandel Lo alert the user 1 ta presence of mportart operaling and maintenance (saniing) Istutions in te eraure aocompanying the applance

0. Do not deeat Ie say purpose of he palarzedl ar graundähg type plug. À palarizecl plug has Mo blades with one wider than I oiner. À grounding pe pug has ho blades and a ted grounding rong. The ide bad or he tr prang provided fr yaur sale} Nine provided plug does ok ft Ant our out, consult an ciao In replacement of th absolate out.

1. Protect ina poser cord from being walk an ar pinched - paru at plug, convaniance receptacis, and the point here hey en from 1e apparus.

2, Do not nstal in an area that impades the acces Lo he pouver plug. Discomnecting he por PL is 1e any way to completely remove power Lo tne product and must be ready accessible at aimes.

3. Power source - ea ony pour auppies of the type speciad in the operating instructions 0e as markec on he apple. N'a separate power supp s ncluded wi Us apparus, do not ubétlute with any other poner Suppy use Only manufacturr-provided porver suppbée.

4. Unplug this apparatus during lghining stomns or wen unusod for long perods of time.

16. Raler a senieing to qualfid senice personnel. Seriing is required when tha apparus has boën ‘damaged in any way, such as power-Suppy cor ar pug s damaged, quid has been spl ar objects have falen into the apparatus, the apparatus has been expose Lo rai or most, does not “pérate normal, or has boën rappel. For servi, rer Lo qualiiad senc personnel eu 0 ha ‘dealer, or cal ne All Lansing serie ine for assistance

16. For products that incorporate battre, please rer to local regulations fo proper battery deposal.

17. Oniyuse attachments /acoessores specified by he manufacturer

#8. Use onÿ with ne car, stand, ipod, bracket or able speclied by he manufacturer or

sold with the apparatus, Wan a cart is used, use caution vien mov ta cart! ‘apparatus combination 0 avoid iury om Hip-ove.

Welcome... Safety Information. Package Contents. Getting Started. Placing and Removing Adapters for the iPhone and iPod. Speaker Features and Indicators Speaker Controls. Enhanced Remote Feature: Listening to Your iPhone or iPod. Charging your iPhone or iPod Listening to the FM Radi Listening to a Non-docking iPod or Other Portable Audio Devic: Maintaining Your Speaker System Troubleshooting. Warranty …

Altec Lansing inMotion Max speaker system User Guide and Quick Connect Instructions

Miscellaneous adapters or IPhone and iPod

How to Install the AG Adapter  Connect the AC adapter cable plug into the speaker system's jack.

The jack is located on the back of the system.

2 Plugthe AC adapter into the wall outlet.

How to Charge the Lithium-lon Battery Your Alec Lansing inMotion Max speaker system includes a rechargeable lithium-ion battery. This battery should be fully charged

before initial use of the speaker system. À ful charge will provide up to 3.5

hours of continuous playing time.

Wen the battery icon on the LCD screen displays a single segment, you should recharge the battery. When the battery icon starts flashing, the speaker system is about to automatically shut down.

 Connect the speaker system to a wall outlet. See the How to Install the AC Adapter section. The battery icon on the LCD screen will show the battery is charging.

2 Allow the battery to charge.

Charging time: Up to 8 hours for a full charge. When the battery is fully recharged, the battery icon is shown as ful.

WARNING During the recharging process, it is typical for the battery to become warm. To be safe, keep flammable materials away from the speaker system.

How to Disconnect the Rechargeable Battery I you need to replace the lithium-ion battery, you wil need to first remove it

Unplug the speaker system from the wall outlet.

Remove the rechargeable battery compartment cover.

The battery compartiment is located on the back of the speaker system. Remove the 2 screws securing the cover in place. Then remove the cover.

Unplug the battery and remove it.

NOTE The lithium-ion battery must be properly recycled or disposed of. Please contact your local recycling center for proper battery handing and disposal instructions.

How to Install the Enhanced Remote Battery

The enhanced remote battery (included) is not installed at the factory. To install the battery, follow the steps below:

Pull out the battery holder.

The battery door is located on the lower end of the remote. Simply pull the tab to open the battery holder.

Position the battery (included) so it sits in the battery holder correctly. Make sure the polarity (the + and - sides of the battery) is correct.

Replace the battery door.

NOTE Please discard used batteries properiy.

Placing and Removing Adapters for the iPhone and iPod

Your Altec Lansing inMotion Max speaker system includes removable adapters for todaÿ's popular iPhone and iPod models. These adapters ensure that your iPhone and iPod proper fi in the speaker systems dock. As new iPhone and iPod models are introduced, new adapters will be made available to customers. You may also use the adapters supplied with your iPhone or iPod or available for purchase at www.apple.com.

How to Place an Adapter

À Select the correct adapter for your iPhone or iPod. Using the correct adapter ensures a proper fi for your iPhone or iPod.

2 Gentiy press the iPhone or iPod adapter into the dock.

Now you can carefully place your iPhone or iPod into the dock.

NOTE Your iPhone or iPod cannot be in a case or a “skin.”

How to Remove an Adapter

À Remove your iPhone or iPod.

2 Grip the adapter and pull gently upward.

Speaker Features and Indicators

Expanded Sound Stage technology button

Track fonnard button rack back button Volume increase button Volume decrease button

Source button Power = TZ oo ||

Universal docking station for iPhone or iPod

FM antenna connector

Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started

Turn on your speaker system section for more information. Press the © button.

Press the Ô button. Whenever you are finished using your speaker system, please remember to turn it

Turn off your speaker system un off your spi Ysten and your iPhone, iPod or other MP3 player off to conserve electricity.

Change audio source Press the SOURCE button to cycle through and select the audio source: iPod, FM radio or AUX. Turn up the volume Press the + button Turn down the volume Press he - button.

Skip to the beginning of the current song on

your Phone or IPod In “iPod” mode, press the ii button.

Rewind the currently playing track on your

{Phone or Pod In “iPod” mode, press and hold the x button.

Skip to the beginning of the next song on

Your Phone or IPod In “iPod” mode, press the #1 button.

Fast-forward the currently playing track on

In “iPod” mode, press and hold the 13: button. your iPod

Tune radio stations In *FM" mode, use the ri and #1 buttons. See the Listening to the Radio section for additional information:

In “FM" mode, press and hold the ii or ii button. See the Listening to the Radio section for additional

Scan radio stations. information

Listen to a non-docking iPod or MP player

See the Listening to a Non-docking iPod or Other Portable Audio Device section for specific information on using devices attached to your speaker system's AUX jack.

Activate Expanded Sound Stage (ESS) technology

Proprietary ESS technology widens the stereo image to fil a room with sound. Press the ESS button to activate it.

Press the à and SOURCE buttons simultaneous)y for a few seconds. Once the word *RESET ?" is displayed on the screen, press the @ button to reset all settings.

Select FM Band region

Reset al settings (see above), and use the + and - buttons to select the region closest to your (REGION 1: USA," “REGION 2: EUROPE," “REGION 3: JAPAN WIDE," or “REGION 4: JAPAN.) Then, press the © button to save your selection

The enhanced remote lets you operate many functions of your Altec Lansing inMotion Max speaker system:

‘Turn on your speaker system Press the & button.

‘Turn off your speaker system Press the O button.

Press the SOLIRCE button to cycle through and select the audio source: iPod, FM radio or AUX.

Turn up the volume Press the + button.

Turn down the volume Press the - button.

In “Pod” mode, press the » 1 button to begin Playing a selected track. Press the button again to pause it.

Play/Pause a song on your iPhone or iPod

Skip to the beginning of the current

song on your iPhone or iPod In “iPod” mode, press the ii button.

Rewind the currently playing

track on your iPhone or (Pod In “Pod” mode, press and hold the i#i button.

Skip to the beginning of the next

In “iPod” mode, the rm butte Song on your iPhone or iPod! 1UIPON moGe, PIESS fe Durton

Fast-forward the currently playing

track on your iPhone or iPod In “Pod” mode, press and hold the #1 button.

Enhanced Remote Features

Expanded Sound Stage technology button

Enhanced Remote Features

In “FM” mode, use the #4 or sx buttons. See the Listening to the Radio section for additional information.

In “FM° mode, press and hold the #1 or 4 button. See the Listening to the Radio section for additional information.

Store a radio station

In FM" mode, tune to the station you'd Ike to store, and then press and hold one of the PRESET buttons (P1, P2, P8 or P4). See the Listening to the Radio section for more information.

Select a preset radio station

In “FM” mode, press the PRESET button (P1, P2, P3 or P4) that corresponds to the station you'd Ike to hear. See the Listening to the Radio section for more information.

Activate Expanded Sound Stage (ESS) technology

Proprietary ESS technology widens the stereo image to fil a room with sound. Press the ESS button to activate it.

NOTE For best results, aim the enhanced remote control toward the inMotion Max speaker system.

Listening to Your iPhone or iPod

1 Dock your iPhone or iPod in the Altec Lansing inMotion Max How to Access Additional Features on Your iPhone or iPod Using

speaker system. the Enhanced Remote

2 Select “iPod” mode.

Press the SÜLIRCE button on your speaker system or enhanced remote until the iPod icon appears on the LCD.

3 Press the à button on your iPhone or iPod. Music from your iPhone or iPod will start playing. The speaker system and its remote are capable of controlling basic functions of 8rd-generation iPod models, the iPod touch and iPhone.

4 Adjust the volume. Use the + and — buttons on the Altec Lansing speaker system

to adjust the system volume. Or, use the + and - buttons on the enhanced remote.

5 Find your desired song. Press the #1 or x button on your speaker system or enhanced remote +0 go to the next or previous track. Press and hold the ii or ii button on your speaker system or enhanced remote while track is playing for high-speed forward or reverse music search of the current track.

NOTE To conserve battery power, reduce the speaker system volume level.

NOTE During battery-oniy operation, the speaker system automatically shuts down if no audio is detected for a few minutes. Press the ( button to turn the speaker system back on. {f the speaker system is connected to a wall outlet, it wil remain on until the O button is pressed and the indicator light shuts of.)

NOTE The speaker system is compatible with the alarm clock and sleep timer features built into select iPhone and iPod models. For these features to work proper, the speaker system must be connected to a wall outlet. See the user guide for iPhone or iPod for detais on how to access these features.

Press the P1 button once on the enhanced remote to advance to the next shuffle mode. SH ALBU is displayed when the system is in album shuffle mode. SH SONG is displayed when the system is in song shuffle mode. SH OFF is displayed when the shuffling function has been turned off. Note: Use the P2 button on some older iPod models. Functionality may vary per iPhone or iPod model.

Press the P2 button once on the enhanced remote to advance to the next repeat mode. RPT ONE is displayed when the system is in the repeat one mode. RPT ALL is displayed when the system is the repeat all mode. RPT OFF is displayed when the repeat function has been tumed off. Note: Use the P2 button on some older iPod models. Functionality may vary per iPhone or iPod model.

Access the previous playlist

Press the P3 button on the enhanced remote.

Access the next playlist

Press the PA button on the enhanced remote.

Charging Your iPhone or iPod

Whenever your iPhone or iPod is docked and your Altec Lansing inMotion

Max speaker system is plugged into an AC outlet, your iPhone or iPod is charging (until full charged) - even if the speaker system is switched off.

Listening to the FM Radio

 Plugthe FM radio antenna into the speaker system's FM ANTENNA jack.

The jack is located on the back of the system.

2 Extendthe FM antenna wire fully for best FM reception. Also, do not strip, alter or attach to other antennas.

3 Select “FM” mode. Press the SÜLIRCE button on your speaker system or enhanced remote until the FI appears on the LCD.

4 Tune to the station you want to listen to.

Use the # and # buttons on your speaker system or enhanced remote to tune in the desired station. Press and hold these same buttons to find the next clear FM station.

Use the + and buttons on the Altec Lansing speaker system to adjust the system volume. Or, use the + and - buttons on the enhanced remote.

How to Store Preset Stations Your Altec Lansing speaker system's enhanced remote enables you to program up to 4 FM station presets: À Tune to the station you wish to store. While in “FM" mode, use the and #4 buttons on your speaker system or enhanced remote to tune to the desired station. 2 Store the station. Press and hold the P1, P2, P3 or P4 button on the enhanced remote for a few seconds. You can store one FM station in each preset.

3 To store other stations, repeat the above steps.

How to Recall Preset Stations

À Make sure you are in “FM” mode. If you're not in “FM” mode, press the SÜLIRCE button on your speaker system or enhanced remote until the FiHl appears on the LCD. 2 Press a PRESET button (P1, P2, P3 or P4) on the enhanced remote. The radio wil tune to your preset station.

3 Adjust the volume.

Use the + and - buttons on the Altec Lansing speaker system to adjust the system volume. Or, use the + and - buttons on the enhanced remote.

Listening to a Non-docking iPod or Other Portable Audio Device

I you have a non-iPod MP3 player or other non-docking portable audio device, you can enjoy it through your Altec Lansing inMotion Max speaker system as well. Just connect it via the AUX jack. Here's hour:

À Locate a 3.5 mm stereo cable {not included).

2 Plug one end of the stereo cable into your device.

Your device should have either a headphone or LINE OUT jack for you to plug into.

3 Plugthe other end of the stereo cable into your speaker system's AUX jack.

‘The AUX jack is located on the back of the unit 4 Select “AUX” mode. Press the SOILIRCE button on your speaker system or the enhanced remote until the AUX icon appears on the speaker system's LCD. 5 Turn on your device and start it playing.

6 Adjust the volume.

Use the + and buttons on the speaker system to adjust the volume. Or, use the + and - buttons on the enhanced remote.

NOTE You may need lo adjust the device volume also. Your device's volume should be set to approximately % volume.

7 When you are finished listening to your portable audio device, please remember to turn both it and your speaker system off to conserve electricity.

Maintaining Your Speaker System

Place your speaker system on a level surface away from sources of direct sunlight or excessive heat

Protect your furniture with a cloth or other protective material when placing your speaker system on a natural wood or lacquered finish,

Clean your speaker system with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials, can damage the surface of the unit.

Speaker system doesn't respond (no power)

AC adapter isn't plugged into a wall outlet or the connector isn't plugged into the power supply jack on the back of the speaker system

Plug the AC adapter into a wall outlet and plug the connector into the power supply jack on the back of the speaker system.

Wall outlet is not functioning

Plug another device int the same outlet to confirm the outlet is working.

The rechargeable battery isn't charged.

Recharge the battery. (See the Getting Started section for details.)

The power isn't turned on.

Turn on the speaker system by pressing the O button. The indicator light turns on.

iPhone or iPod doesn't dock properly

Using the wrong adapter for iPhone or iPod or no adapter

Make sure the adapter is the proper fit for your iPhone or iPod.

iPhone or iPod didn't install property

Remove your iPhone or iPod from the dock and check for obstruction on the connectors in the dock and on your iPhone or iPod. Then reseat i in the dock,

iPhone or iPod doesn't respond to the speaker system

iPhone or iPod is not installed properly

Remove your iPhone or iPod from the dock and check for obstructions on the connectors in the dock and on your iPod. Then reseat it in the dock.

Your iPhone or iPod software is too old

Upgrade software on your iPhone or iPod. For details visit wwwapple.com/pod/download.

iPhone or iPod is locked up

Please make sure your iPhone or iPod is working propery before docking into the unit. Please refer to your iPhone or iPod manual for details,

Using 1st- or 2nd-generation iPod, iPod shuffle or other devices:

Your speaker system cannot control those iPods or other devices.

iPhone or iPod didn't charge

iPhone or iPod is not installed properly

Remove your iPhone or iPod from the dock and check for obstructions on the connectors in the dock and on your iPhone or iPod. Then reseat i in the dock,

iPhone or iPod is locked up

Please make sure your iPhone or iPod is working propery before docking into the unit. Please refer to your iPhone or iPod manual for details,

AC adapter isn't plugged into a wall outlet,

or the connector is not plugged into the power supply jack on the back of the speaker system

Plug the AC adapter into a wall outlet and plug the connector into the supply jack on the speaker system.

Volume level is set to high

Decrease the volume.

Sound source is distorted

I the iPhone or iPod original sound source (MPS) is of poor quality, distortion and noise are easily noticed with high-power speakers. Try a different audio source such as a music CD.

Enhanced remote doesn't work

Replace current battery with a new battery.

Enhanced remote is not pointed toward the speaker system

Point the enhanced remote toward the Altec Lansing speaker system and move within 10 feet of the unit.

No sound from the AUX device, such as an MP3 player or CD player connected to the AUX jack

Volume on the device is set too low

Increase the volume on the device to approximately % full volume.

Source selector is not set to AUX Set source selector to AUX.

The speaker system exhibits erratic or unexpected behavior. Controls do not function.

Static electricity, momentary interruption of power or abnormal operating conditions may be responsible.

1. Disconnect the AC adapter cable plug from the speaker system's jack. 2. Close the stand on the back of the speaker system.

8. Wait 20-30 seconds,

4. Open the stand on the back of the speaker system.

5. Reconnect the AC adapter cable plug to the speaker systems jack.

ALTEC LANSING ONE-EAR LIMITED WARRANTY What Does the Warranty Cover?

Alec Lang warrants that is products shall b fr from defects in material or workranship, with tha exceptions stated below.

What Is the Period of Goverage?

is warranty runs for one year from ine date af purchase. The term of any waranties Impled by La Sa expire ven your imied warranty expire, Some states and/or Member States in the European Union do ot alowImlations on haw long an mpled warranty last, 50 the above Imitation may of app} 10 vou: What Docs tho Warranty Not Cover?

is warranty does not cover any defect, maïunclon or al that cœurs as a resut of: Improper instalation, misuse or falure to follow the product directions; abuse; or use with proper, unintended orfuiy équiement. (For Information on proper instalation, operation and usa cansuî to manual supplied at the product. 1 you requre a replacement manual, you May ourload à manual rom

‘as ahectaneing.com ) Ako, consequental and incidentl damages are not recoverabie under ts. Waranty. Some staes do not allow ne exclusion or mation af incident or consaquentel damage,

0 ha above imlation or exclusion may not app 1 you.

What Wil Altec Lansing Do to Correct to Problem?

Alec Lanäg il at option, repair or replace any product hat proue 10 be defecte in material or ‘wortemansh. 1 jour roduet is no langer being manufaclured, rs Out f stock, at option, Ac: Lansing may replace your produet with a similar r beter Alec Lansing product.

Hour 10 Get Warranty Service

To get a covered product repaïed or replaced, you must contact Alec Lansing ui the waranty perñcd by emal [esupportGalclansng com. Vou must ciude in your emal, Your name, ares,

mal address, telephone number, date of purchase and a complets description of ne grablem you

8 experencing. the United States, you may alternatuey contact Altec Lansng by tiaphone at 1-800-ALTEC28. Peace ba prepared t provide the same inomaton. I ie problem appears 10 be related 1 a defact in mater or workranehp, Alec Lansng vil provide you a return authofzaion and instructions fr return shipment. Return shipments sh be at the customers expense, and he return must be accomparied by the argial proof of purenase. You shoud Insure he shpment 25 appropriate because you are responsible fr ha product url 1 amves at Alec Lansing

How Wil State Lau Affect Your Rights?

is warranty gives you spaci legal his, and you may aiso have ather ghis ich var from state

a state. Please note that in the Eurapean Union, you a consumer might have other legal hs under atonal lgilation of European Union Member States gauerring th sal af Alec Lanssng' goods. ose Fghis ar not aflectod by tis quarante.

ha aboue limited aranties and remedies are sole wrantes and remeches available to purchase, if, and La th een, vai and enforceable under the applicable la

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT {This symbol on ine produt or on is packagng indicate Ina Hi product shal not be Aaled as housahold waste Inetead 1 shal be handedl aver to the applicable colection point er 1h recyelng of alcial and electronic equipment. By ensuring ii product is disposod of cote}, you il help prevent potential negative consequences {or 1e ervéronmnt an human health, wfsch could othemnise be caused by appropriate waste M nn of 1h product. Ta récyclng of malariak wi ab Lo concene naturai resources. For more detaled information about recycäng of product, please contact your local ct ofica or your househokd waste désposal serie.

immateclansing.com HEADQUARTERS 535 Re. 6 & 209, Mlford, PA 18337-0277 + 800-ALTEC-88. 570-296-4434. e Fax 570-206-6887 EUROPE _ 13 Rue Beaumont, L-1219 Luxembourg, Luxembourg

ASIA/PACIFIC _28/F, Office Tower, Shun Hing Square Diwang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen, China 518008

“Mad for iPod” means that an electronic accessory has been designed to connect specificaly to (Pod and has been certiied by the developer to meet Apple performance standards.

Works with iPhone” means that an electronic accessory has been designed to connect special to iPhone and has been certified by the developer to meet Apple perlormance standards.

Apple is not responsible for the operation of this device ar its complance with safety and regulatory standard.

(22008 Prantronics, Inc. Al rights reserved.

ALTEG, ALTEC LANSING, he Alec Lansing logo, the horn design, inMotion, and iMT702 are trademarks or registered trademarks of Alec Lansing, a division of Plantronics, Inc. Plantronics, the logo design, and Sound Innovation ar trademarks or registered trademarks of Plantronics, Inc.

iPod is a trademark of Apple, Inc., registered in the U.8. and other countries.

iPhone is a trademark of Apple, Inc. Le Al other trademarks appeaing hein are the property other respective one:

Designed by Altec Lansing in {he USA. Made in China. A12806 R04