BABY CENTER - Baby Furniture HAUCK - Free user manual and instructions

USER MANUAL BABY CENTER HAUCK

IMPORTANT - KEEP IT FOR LATER READING

1. Never leave your child unattended.
2. To avoid danger of suffocation, you have to remove the plastic cover before use. Please dispose the plastic cover and keep it away from little children.
3. Make sure before use, that all locks are closed.
4. The bed is ready for use when the fix mechanism of the folding system is locked.
5. Keep the bed away from: fans, heat sources, sharp objects or corners, water containers or window blind. So you can avoid injury.
6. Do not let anything in the bed with which the child can stand up.
7. Do not let anything in the bed, which can cause strangulation hazard.
8. Should you use an additional mattress, make sure, that the height (from mattress surface to the upper edge of the bed) is at least 500~mm .

This product corresponds to the norm DIN EN 716-1: 1995-12, 716-2: 1995-8

Please use only original hauck accessories and original hauck spare parts.

From time to time, check your bed for worn parts, torn material or stitching. Replace or repair the parts as needed.

To clean your travel bed, wipe with damp cloth and use mild detergent.

Instructions of use

Erecting

1. Put the bed on its feet (fig. 1).
2. Pull the short side parts up until you can hear a click and it is engaged.
3. Do the same with the long parts.
4. After this press the bottom down until it is complete engaged.
5. Now you can put in the mattress.
6. By pressing the brakes, you can fix or loosen the wheels (fig. 2).

Bassinet

1. Put both horizontal struts of the bassinet over the short sides of the bed. Then push the 4 metal ends of the struts under the edges (fig. 3).
2. Then push the 4 plastic mountings on the long sides of the bed (fig. 4).
3. Now you can put the mattress into the bassinet.

To remove it, do it in the reversed order.

Folding

1. Remove the mattress.
2. Pull up the loop on the bottom of the bed.
3. To unlock the side parts, feel for the two press buttons below the short side parts (Marked by the words: Press to unlock) and press them while you slightly lift up the joint rod (fig. 5). It is important that the joint rod is unlocked on both sides of the press buttons.
4. The press buttons on the long side parts must be unlocked in the same way.
5. Fold up the bed by pulling up the middle loop on the bed bottom and fit the side parts closely.
6. Now, put the mattress around the folded bed and close the velcro.
7. After this, put the bed into the carry bag.

CONSERVER CE MODE D'EMPLOI POUR UN USAGE ULTERIEUR ET LE LIRE ATTENTIVEMENT

IMPORTANT- KEEP IT FOR LATER READING

CONSERVER CE MODE D'EMPLOI POUR UN

CONSERVER CE MODE D'EMPLOI POUR UN

USAGE ULTERIEUR ET LE LIRE ATTENTIVEMENT

BELANGRIJK - - BEWAAR - - ALS - - NASLAGWERK

CONSERVARE PER UNA CONSULTAZIONE SUCCESSIVA

CONSERVAR PARA APLICACION POSTERIOR

COXPAHITb DnBdyuIeTO IcNoJb3OBAHnIa