R2303 - Milling machine Vevor - Free user manual and instructions
Find the device manual for free R2303 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Precision column milling machine |
| Brand | Vevor |
| Model | R2303 |
| Usage | Drilling and milling of metals, plastics, and wood |
| Supply voltage | 230 V / 50 Hz |
| Motor power | 550 W |
| Spindle speed | 50 to 2500 rpm |
| Drilling capacity | 16 mm |
| Table longitudinal travel | 300 mm |
| Table cross travel | 120 mm |
| Vertical travel of the column | 280 mm |
| Work surface | 430 x 120 mm |
| Dimensions (L x D x H) | 650 x 500 x 780 mm |
| Net weight | 48 kg |
| Noise level | Approx. 75 dB(A) |
| Head angle | Tiltable on both sides to 45° |
| Maintenance and cleaning | Remove chips after each use, lubricate the guides and spindle with light oil, and check the tightness of screws. |
| Safety | Wear safety glasses, securely fasten the workpiece, and cut off the power before any adjustment. |
| Spare parts and repairability | Belt, chuck, handwheels, and switches available. Use original Vevor parts to maintain reliability. |
| General information | Delivered with chucks, mounting wrenches, and user manual. |
Frequently Asked Questions - R2303 Vevor
What is the supply voltage of the R2303 milling machine?
The Vevor R2303 milling machine operates on a 230 V mains supply with a frequency of 50 Hz. It is important to check that your installation has a grounded outlet before connecting the machine.
What materials can be milled with the R2303?
This milling machine allows working with materials such as aluminum, brass, plastics, and wood. For hard steels, use a slow speed and appropriate lubrication to avoid overheating the tool.
How do I adjust the spindle speed?
The spindle speed is adjusted by moving the belt on the pulleys after opening the side cover. The useful range is 50 to 2500 rpm. Choose a lower speed for hard materials and a higher speed for soft materials.
How do I install a drill bit or milling cutter?
Use the supplied drill chuck and tighten the tool with the chuck key. For a cylindrical shank cutter, make sure the shank is clean and properly tightened. Never tighten the tool while the spindle is running.
Should the milling machine be lubricated?
Yes, regular lubrication is necessary. Apply a light oil to the guides, lead screws, and spindle. When milling metals, use a cutting fluid to dissipate heat and improve the finish.
How do I clean the milling machine after use?
After each use, remove chips with a brush or a shop vacuum. Wipe the surfaces with a clean, dry cloth, then apply a thin layer of protective oil on unpainted parts to prevent corrosion.
What safety instructions should be followed?
Wear safety glasses and hearing protection, tie back long hair, and remove any jewelry. Securely clamp the workpiece in the vise or on the table, and never wear gloves near rotating parts. Cut off the power before any tool change or adjustment.
Is the machine delivered with accessories?
The R2303 milling machine is delivered with chucks, a chuck key, mounting wrenches, and a user manual. Some models include a precision vise and a set of router bits.
What to do in case of abnormal noise or excessive vibration?
Stop the machine immediately and unplug it. Check the tightness of the spindle, pulleys, and belt, as well as the fastening of the table and column. If the problem persists, contact Vevor after-sales service.
How to get spare parts for the R2303?
Parts such as the belt, chuck, handwheels, switches, and nuts are available from your dealer or on the Vevor website. Always use original parts to ensure the reliability and safety of the machine.
User questions about R2303 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Milling machine in PDF format for free! Find your manual R2303 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. R2303 by Vevor.
USER MANUAL R2303 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : R2303
Category : Milling machine