BL-DC2008/20V-MT - Drill Vevor - Free user manual and instructions
Find the device manual for free BL-DC2008/20V-MT Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless drill driver |
| Brand | Vevor |
| Model | BL-DC2008/20V-MT |
| Rated voltage | 20 V |
| Battery type | Lithium-ion |
| No-load speed | 0 to 1,500 rpm |
| Maximum torque | 28 Nm |
| Number of speeds | 2 mechanical speeds |
| Chuck | 10 mm self-tightening chuck |
| Drilling capacity (wood) | 25 mm |
| Drilling capacity (steel) | 10 mm |
| Hammer function | Yes |
| LED light | Yes |
| Chuck brake | Yes |
| Weight | 1.3 kg (with battery) |
| Dimensions (L × W × H) | 20 × 6 × 24 cm |
| Charging time | Approximately 1 hour |
| Box contents | Drill, 2 batteries, charger, 10 bits, storage case |
| Care and cleaning | Clean with a dry cloth; do not use solvents |
| Safety | Wear protective goggles; do not expose to moisture |
| Spare parts | Available on request from the manufacturer |
| Repairability | Brushless motor, durable and easy-to-maintain design |
| General information | Domestic and professional use |
Frequently Asked Questions - BL-DC2008/20V-MT Vevor
How to insert and remove a drill bit?
To insert a drill bit, open the self-tightening chuck by turning the ring counterclockwise, place the bit, then tighten clockwise. To remove it, repeat the operation in reverse direction.
How to adjust the tightening torque?
Use the torque adjustment ring located behind the chuck. Turn it to the desired number: the higher the number, the greater the torque. Set it to the drilling symbol for normal drilling.
How to charge the battery?
Insert the battery into the supplied charger, then plug the charger into a wall outlet. The indicator light shows the charging status. A full charge takes approximately 1 hour. Do not leave the battery charging for more than 24 hours.
How to reverse the rotation direction?
Use the rotation direction selector located above the trigger. Push it to the left for clockwise rotation (drilling/screwing), to the right for counterclockwise rotation (unscrewing). Do not change direction while the motor is running.
Can you drill concrete with this drill?
Yes, thanks to the hammer function. Set the switch to hammer mode, use a concrete drill bit, and apply moderate pressure. For very hard materials, it is recommended to take breaks to avoid overheating the tool.
What to do if the drill does not start?
First check that the battery is charged and correctly inserted. If the problem persists, try the other battery if you have one. Make sure the direction selector is not blocked halfway. If the tool still does not work, contact after-sales service.
What accessories are included in the case?
The case contains the drill, two batteries, a charger, ten screwdriver bits, and a carrying case. Some models may include drill bits.
How to clean the tool after use?
Use a dry cloth to wipe the outside of the drill. Never use water or solvents. Regularly clean the ventilation slots with a soft brush to prevent overheating.
What is the maximum rotation speed?
The drill has two speeds: the first up to 500 rpm for screwing, the second up to 1500 rpm for drilling. Use the speed selector located on the top.
How to store the battery long term?
Store the battery in a dry and temperate place, away from frost and heat. Ideally, maintain a 50% charge if you do not use it for several months. Recharge it every 3 months to preserve its lifespan.
User questions about BL-DC2008/20V-MT Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual BL-DC2008/20V-MT - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BL-DC2008/20V-MT by Vevor.
USER MANUAL BL-DC2008/20V-MT Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : BL-DC2008/20V-MT
Category : Drill