Surface Precision - Scale CECOTEC - Free user manual and instructions

USER MANUAL Surface Precision CECOTEC

1. Parts and components
2. Before use
3. Operation
4. Cleaning and maintenance
5. Troubleshooting
6. Disposal of old electrical and
   electronic appliances
7. Copyright
8. Simplified EU Declaration of Conformity

SOMMAIRE

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

- This device is designed for personal use only and is not suitable for commercial use.

- Keep the appliance and its packaging out of the reach of

children and animals when unsupervised.

• Do not use the appliance if it shows visible signs of damage. In case of malfunction, contact the official Cecotec Technical Support Service.
• Keep the appliance away from electromagnetic fields (mobile phones, remote controls, etc.). Otherwise, measurement accuracy could be affected.
• Keep the appliance away from heat sources.
• Do not use the appliance outdoors.
• Do not expose the appliance to extreme temperatures, moisture, wet conditions or direct sunlight.
• Keep water and other liquids away from the appliance.
• Wide temperature variations could cause condensation. In this case, allow the appliance to go back to room temperature before use.
• Do not drop the appliance or jump on its measuring surface.
• Do not stand on the scale with wet feet and make sure the measuring surface and the surface underneath is dry.
• Do not stand on the edge of the scale.
• Do not use caustic or abrasive cleaning materials to clean the appliance, as this could damage the surface.
• This scale is intended to be used for determining body weight, analysing water, body fat, muscle and bone mass proportion in the body and calculating Body Mass Index (BMI).
• BMI function is only suitable for calculating the ideal weight of adults aged 18 and above.
• The calculated results are simple reference values. Do not use these results as the basis for any form of medical treatment or diet and contact a professional for any doubt.
• Body analysis function is not suitable for:

• People under the age of 10 or over the age of 70.

• People with a pacemaker or any other medical implant with electronic components.

• People with fever, oedema or osteoporosis symptoms.
• People undergoing dialysis treatment.
• People who are taking cardio-vascular medication.
• Pregnant women.
• The appliance can support a maximum body weight of 180 kg.

Instructions on batteries

• Keep batteries away from children and animals, they could be harmful if swallowed. In case of ingestion, seek medical assistance immediately.
• Should a battery have leaked, do not allow your skin, eyes or mucous membranes to come into contact with the battery acid.
• Warning: In case of contact with acid, rinse the affected areas with abundant fresh water immediately and contact a doctor as soon as possible.
• Make sure the battery contacts in the appliance are clean before inserting them. Clean them if necessary.
• Only use the battery type specified in the technical specifications.
• Always change all batteries at the same time and do not use cells of different types or different capacity.
• When replacing batteries, note the correct polarity (+/-).
• Take the batteries out of the appliance when discharged or when the appliance is not going to be used for a long time.
• Batteries should not be recharged or reactivated, dismantled, thrown into fire, immersed in fluids, or short-circuited.

• This appliance uses 2 x 1.5 V batteries, AAA type (included).

• Warning: If "Lo" appears on the display, batteries need to be replaced.

• Replacing the batteries:
• Open battery compartment at the bottom of the appliance.
• Remove used batteries.
• Introduce 2 x 1.5-volt batteries, AAA type. Pay attention to polarity.

INSTRUCTIONS DE SÉCURITÉ

1. LCD display
2. Tempered glass platform
3. Battery compartment cover
4. Weight unit selection button

2. BEFORE USE

• Take the appliance out of the box. Check carefully if there is any damage, and if there is, immediately notify the Technical Support Service of Cecotec.
• Select the desired unit of measurement by pressing the weight unit change button (kg, lb or st:lb).

Box content:

• 2 x 1.5V AAA batteries
• Surface Precision
• Instruction manual

- Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

3. OPERATION

• Place the device on a solid, dry and level surface (avoid carpets). Uneven floors will result in inaccurate measurements.
• Step onto the scale carefully. The display will automatically turn on and show your weight. The display will lock and flash to indicate the final weight reading. The device will automatically turn off after several seconds of inactivity.

To ensure accurate operation, remember to take off your shoes and socks before stepping onto the scale.

• Step onto the scale, place your feet on the contact sensors and remain still.
• Do not step off the scale until the results appear on the display.

4. CLEANING AND MAINTENANCE

• Never immerse the device in water or other liquids. Do not allow any liquid to enter the device during cleaning.
• Never use caustic or abrasive cleaning agents to clean the device, as these may damage the surface.
• Use a soft, damp cloth to clean the scale; if necessary, use a mild cleaning agent.
• When not in use, store the device in a clean, dry place, protected from direct sunlight and out of the reach of children.

5. TROUBLESHOOTING

1. Place your feet in the same position each time you weigh yourself. Remain still during measurement.
2. Weigh yourself without clothing whenever possible. Clothing weight may vary.
3. Move the scale to a location where it won't be knocked. If the scale is bumped while activating or in use, it may produce an incorrect reading.
4. For the most consistent readings, weigh yourself at the same time of day. Consider weight fluctuations due to food or drink in your system.
5. If "C" appears on the display, this indicates the scale is unstable. Step off and weigh yourself again.
6. Err = Overload. This indicates the maximum weight capacity has been exceeded. Remove weight immediately to prevent permanent damage.

6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its service life, you must remove the batteries/accumulators and take it to a collection point designated by local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries. Compliance with the above guidelines will help protecting the environment.

7. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

8. SIMPLIFIED EU DECLARATION OF CONFORMITY

CE Cecotec Innovaciones hereby declares that this product complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested in compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity

1. PIÈCES ET COMPOSANTS

Img. 1

5. PROBLEEMOPLOSSING