E1200 - Wireless Router LINKSYS - Free user manual and instructions

USER MANUAL E1200 LINKSYS

Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Разширена конфигурация Linksys E-Series Static IP (Статичен IP)

Telstra Cable Linksys E-Series Разширена конфигурация Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Име на модела Linksys E1200 Работна температура FAT32, NTFS и HSF+ Име на модела Linksys E4200 UPnP поддържа се

WPA2/WPA Mixed Mode WPA2/WPA Enterprise Mixed Mode FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Power-port (strøm) WPA2/WPA Mixed Mode WPA2/WPA Enterprise Mixed Mode Get Windows XP Service Pack 3 (Hent Windows XP Service Pack 3)-meddelelse FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Power (strøm)/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Driftstemp. 0 til 40°C Opbevaringstemp. -20 til 60°C Kabelforbindelsestype KAT 5e FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Power (strøm)/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Driftstemp. 0 til 40°C Opbevaringstemp. -20 til 60°C Kabelforbindelsestype KAT 5e Power (strøm)/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Driftstemp. 0 til 40°C Opbevaringstemp. -20 til 60°C Kabelforbindelsestype KAT 5e Internet, Ethernet (1-4), USB, Power (strøm) Opbevaringstemp. -20 til 60°C Knapper Power (strøm), Ethernet (1-4) 10/100/1000 Mbps (Gigabit Ethernet) Power (strøm), USB, Internet, Ethernet (1-4) Enhedens vægt 360 g Knapper Toppanel: Power (strøm) Bagpanel: Internet, Ethernet (1-4) Certificeringer Internet-Port Ethernet-Ports Stromanzeige Telstra Cable (Telstra-Kabel) WPA2 Personal (WPA2-Personal) Am höchsten WPA Personal (WPA-Personal) Hoch WEP Elementar FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Netzstrom/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Betriebstemperatur 0 bis 40 °C Lagertemperatur -20 bis 60 °C Kabeltyp Kat. 5e Wireless-N Router Modellnummer E900 Standards Wi-Fi Protected Access™ 2 (WPA2), WEP, Wireless-MAC-Filtering Sicherheitsschlüssel/Bit FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Netzstrom/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Betriebstemperatur 0 bis 40 °C Lagertemperatur -20 bis 60 °C Kabeltyp Kat. 5e Wireless-N Router Modellnummer E1200 Standards Wi-Fi Protected Access™ 2 (WPA2), WEP, Wireless-MAC-Filtering Sicherheitsschlüssel/Bit FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g), WPA2, WMM, Wi-Fi Protected Setup, Windows 7 Netzstrom/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Betriebstemperatur 0 bis 40 °C Lagertemperatur -20 bis 60 °C Kabeltyp Kat. 5e Wi-Fi Protected Access 2 (WPA2), WEP, Wireless-MAC-Filtering Sicherheitsschlüssel/Bit Advanced Dual-Band-N-Router Modellnummer E2500 Standards High Performance Dual-Band-N-Router Modellnummer E3200 Standards Maximum Performance Wireless-N Router Sicherheitsmerkmale

WEP, WPA, WPA2

• Modellnummer E4200 Sicherheitsschlüssel/Bit 10/100/1000 Mbit/s (Gigabit Ethernet) Linksys E-Series Πίνακας περιεχομένων Telstra Cable (Δίκτυο Telstra Cable) FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Όνομα μοντέλου Linksys E1200 Θερμοκρασία λειτουργίας 10/100/1000 Mbps (Gigabit Ethernet) Linksys E-Series Table of Contents Table of Contents Product overview Wireless Security How to manually set up your router How to run Cisco Connect after setup Your router was not successfully set up Get Windows XP Service Pack 3 message Your Internet cable is not plugged in message . Cannot access your router message Device not found message p. 3
• Advanced Configuration Specifications Setting Up Your E-Series Router Where to find more help p. 3
• How to set up your router How to start Cisco Connect Use Cisco Connect to manage your router Linksys E-Series Product overview Power indicator—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection. Flashes slowly during bootup, during firmware upgrades, and during a Wi‑Fi Protected Setup connection. Flashes quickly when there is a Wi‑Fi Protected Setup error. p. 3

Power—Connect the included AC power adapter to this port. Caution Use only the adapter that came with your router. Back view

Power button—Press | (on) to turn on the router. Bottom view Power port USB port (E3200 only) Internet port Ethernet ports Power indicator Your router’s appearance may vary

USB port (E3200 only)—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port.

Ethernet ports—Connect Ethernet cables (also called network cables) to these Fast Ethernet (10/100, for E900, E1200, and E1500) or Gigabit (10/100/1000, for E2500 and E3200) ports, color coded blue, and to other wired Ethernet network devices on your network.

Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem. Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. For more information, see “Wireless Security” on page 8. Your router’s appearance may vary

Reset button—Press and hold this button for 5-10 seconds (until the port lights flash at the same time) to reset the router to its factory defaults. You can also restore the defaults using the browser-based utility.

Linksys E-Series Product overview E4200 Back view Top view Ethernet ports Internet port Power port Ethernet ports—Connect Ethernet cables (also called network cables) to these Gigabit (10/100/1000) ports, color coded blue, and to other wired Ethernet network devices on your network.

Internet port—Connect an Ethernet cable (also called a network or Internet cable) to this port, color coded yellow, and to your modem.

Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. For more information, see “Wireless Security” on page 8.

USB port—To easily share disk storage with other users on your network or on the Internet, connect a USB drive to this port. .

Reset button—Press and hold this button for 5-10 seconds (until the port lights flash at the same time) to reset the router to its factory defaults. You can also restore the defaults using the browser-based utility.

Power—Connect the included AC power adapter to this port. Indicator light

Indicator light—Stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection. Pulses slowly during bootup, during firmware upgrades, and during a Wi‑Fi Protected Setup connection. Flashes quickly when there is a Wi‑Fi Protected Setup error. Caution Use only the adapter that came with your router.

Power button—Press | (on) to turn on the router.

Linksys E-Series Setting Up Your E-Series Router Setting Up Your E-Series Router Where to find more help In addition to this User Guide, you can find help at these locations:

Linksys.com/support (documentation, downloads, FAQs, technical support, live chat, forums)

Cisco Connect help (run Cisco Connect, then click Learn More where available)

Browser-based utility context-sensitive help (open the utility, then click Help in the right-side column.) To start Cisco Connect for the first time:

1. Insert the CD into your CD or DVD drive.

2. Click Set up your Linksys Router.

If you do not see this:

• • For Windows, click Start, Computer, then double-click the CD drive and the Setup icon.

• • For Mac, double-click the CD icon on your desktop, then double-click

3. Follow the on-screen instructions to complete your router setup.

How to set up your router The easiest and fastest way to set up your router is to run the Cisco Connect setup software. How to start Cisco Connect When you run the setup CD, Cisco Connect (your router’s setup software) is automatically installed onto your computer. You can then use Cisco Connect to easily manage your router. Note: If you lose your setup CD, you can download the software from Linksys.com/support. Use Cisco Connect to manage your router After your router has been set up and Cisco Connect has been installed, you can use Cisco Connect to easily manage many of your router’s settings such as:

Connect devices to your network

Test your Internet connection speed

Configure parental controls

Change your router’s name and password How to manually set up your router After setting up the router with the setup software (located on the CD), the router will be ready for use. If you would like to change its advanced settings, or if the software does not run, use the router’s browser-based utility.You can access the utility with a web browser on a computer connected to the router. For more information on using the utility, see “How to open the browser-based utility” on page 4.

Linksys E-Series Advanced Configuration Advanced Configuration How to open the browser-based utility To access some advanced settings, you need to open the browser-based utility. To open the browser-based utility:

1. Run Cisco Connect, click Change under Router settings, click Advanced

settings, then click OK. – or –

2. Enter the user name and password, then click OK. The utility’s main menu

opens. Tips If you set up your router without using Cisco Connect, your router’s default username and password is admin. If you used Cisco Connect to set up your router, you can see your router’s user name and password by running Cisco Connect, then clicking Router settings. Open a web browser on a computer connected to your network, then go to 192.168.1.1. The router prompts you for a user name and password.

Linksys E-Series Advanced Configuration The first screen that appears is the Basic Setup screen. This allows you to change the router’s general settings. Select your language To use a different language, select one from the dropdown menu. The language of the browser-based utility will change five seconds after you select another language. Internet Setup The Internet Setup section configures the router to your Internet connection. Most of this information can be obtained through your Internet Service Provider (ISP). Internet Connection Type Select the type of Internet connection your ISP provides from the drop-down menu. The available types are:

Automatic Configuration - DHCP The default Internet Connection Type is Automatic Configuration - DHCP (Dynamic Host Configuration Protocol). Keep the default only if your ISP supports DHCP or if you connect using a dynamic IP address. (This option usually applies to cable connections.) Static IP If you are required to use a fixed IP address to connect to the Internet, select Static IP. PPPoE If you have a DSL connection, check whether your ISP uses Point-to-Point Protocol over Ethernet (PPPoE). If so, select PPPoE.

Linksys E-Series PPTP Point-to-Point Tunneling Protocol (PPTP) is a service that generally applies to connections in Europe. If your PPTP connection supports DHCP or a dynamic IP address, then select Obtain an IP Address Automatically. If you are required to use a fixed IP address to connect to the Internet, then select Specify an IP Address and configure the options below. Advanced Configuration Wireless > Basic Wireless Settings The basic settings for wireless networking are set on this screen. Note After you set up the wireless network(s), set up the wireless security settings. L2TP Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to connections in Israel. Wireless Settings Telstra Cable Telstra Cable is a service that generally applies to connections in Australia. Connect on Demand or Keep Alive The Connect on Demand and Keep Alive options let you choose whether the router connects to the Internet only as needed (useful if your ISP charges for connect time), or if the router should always be connected. Select the appropriate option. Network Mode Select the wireless standards your network will support.

Mixed If you have Wireless-N (2.4 GHz), Wireless-G, and Wireless-B devices in your network, keep the default, Mixed.

Wireless-B/G Only If you have both Wireless-B and Wireless-G (2.4 GHz) devices in your network, select Wireless-B/G Only.

Wireless-B Only If you have only Wireless-B devices, select Wireless-B Only.

Wireless-G Only If you have only Wireless-G devices, select Wireless-G Only.

Wireless-N Only If you have only Wireless-N (2.4 GHz) devices, select Wireless-N Only.

Disabled If you have no Wireless-B, Wireless-G, and Wireless-N (2.4 GHz) devices in your network, select Disabled. Note If you have a dual-band router, you can select Mixed, Wireless-A Only, Wireless-N Only, or Disabled for the 5 GHz band. If you are not sure which mode to use, keep the default, Mixed.

Linksys E-Series Advanced Configuration Network Name (SSID) The Service Set Identifier (SSID) is the network name shared by all devices in a wireless network. It is case-sensitive and must not exceed 32 keyboard characters. The default is Cisco followed by the last 5 digits of the router’s serial number, which is found on the bottom of the router. If you used the setup software for installation, then the default Network Name is changed to an easy-to-remember name. Note If you restore the router’s factory default settings (by pressing the Reset button or using the Administration > Factory Defaults screen), the Network Name will return to its default value. Change the Network Name back to its original name, or you will have to reconnect all devices on your wireless network to the new network name. Channel Width For best performance in a network using Wireless-B, Wireless-G and Wireless-N (2.4 GHz) devices, select Auto (20 MHz or 40 MHz). For a channel width of 20 MHz, keep the default, 20 MHz only. Channel Select the channel from the drop-down list for Wireless-B, Wireless-G, and Wireless-N (2.4 GHz) networking. If you are not sure which channel to select, then keep the default, Auto. SSID Broadcast When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the router. To broadcast the router’s SSID, keep the default, Enabled. If you do not want to broadcast the router’s SSID, then select Disabled.

Linksys E-Series Wireless Security Wireless Security Wireless > Wireless Security Option settings The wireless security settings configure the security of your wireless network(s). The router supports the following wireless security options: WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise, WEP, and RADIUS. (WPA stands for Wi-Fi Protected Access. WEP stands for Wireless Equivalent Privacy. RADIUS stands for Remote Authentication Dial-In User Service.) WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal Notes If you select WPA2/WPA Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA and the same passphrase. If you select WPA2 Personal as your Security Mode, each device in your wireless network MUST use WPA2 Personal and the same passphrase. WPA2/WPA Mixed Mode Office options The office options are available for networks that use a RADIUS server for authentication. The office options are stronger than the personal options because WPA2 or WPA provides encryption while RADIUS provides authentication. Security Option Strength WPA2 Enterprise Strongest WPA2/WPA Enterprise Mixed Mode If you select WPA Personal as your Security Mode, each device in your wireless network MUST use WPA Personal and the same passphrase. Passphrase Enter a passphrase of 8-63 characters. The default is password. If you used the setup software for installation, then the default is changed to a unique passphrase, which you can find by running Cisco Connect, then clicking Router settings.

Linksys E-Series WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise These option is used in coordination with a RADIUS server. (These should only be used when a RADIUS server is connected to the router.) NoteS If you select WPA2/WPA Enterprise Mixed Mode as your Security Mode, each device in your wireless network MUST use WPA2/WPA Enterprise and the same shared key. Wireless Security WEP WEP is a basic encryption method, which is not as secure as WPA. Note: If you select WEP as your Security Mode, each device in your wireless network MUST use WEP and the same encryption and shared key. If you select WPA2 Enterprise as your Security Mode, each device in your wireless network MUST use WPA2 Enterprise and the same shared key. If you select WPA Enterprise as your Security Mode, each device in your wireless network MUST use WPA Enterprise and the same shared key. Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits). Passphrase Enter a passphrase to automatically generate WEP keys. Then click Generate. Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually. RADIUS Server Enter the IP address of the RADIUS server. TX Key Select a default TX (Transmit) Key to use. The default is 1. RADIUS Port Enter the port number of the RADIUS server. The default is 1812. Shared Key Enter the key shared between the router and the server.

Linksys E-Series Wireless Security RADIUS Disabled This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the router.) If you choose to disable wireless security, you will be informed that wireless security is disabled when you first attempt to access the Internet. You will given the option to enable wireless security, or confirm that you understand the risks but still wish to proceed without wireless security. Note: If you select RADIUS as your Security Mode, each device in your wireless network MUST use RADIUS and the same encryption and shared key. RADIUS Server Enter the IP address of the RADIUS server. RADIUS Port Enter the port number of the RADIUS server. The default is 1812. Shared Secret Enter the key shared between the router and the server. Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits). Passphrase Enter a passphrase to automatically generate WEP keys. Then click Generate. Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually. TX Key Select a default TX (Transmit) Key to use. The default is 1.

Linksys E-Series Troubleshooting Troubleshooting This chapter can help you solve common setup issues and connect to the Internet. Your router’s CD includes Cisco Connect, the router setup software that makes it easy to connect network devices, change router settings, control guest access, enable parental controls, and connect to the Internet. Cisco Connect is also installed onto your computer during setup. If Cisco Connect is prevented from completing the setup, this chapter will guide you through finding solutions. How to run Cisco Connect after setup When you run the setup CD, Cisco Connect is automatically installed onto your computer. You can then use Cisco Connect to easily manage your network. To start Cisco Connect on a Windows computer:

1. Click Start, All Programs, then click Cisco Connect.

The Cisco Connect main menu opens. To start Cisco Connect on a Mac OS X computer:

1. Open Finder and click Applications in the left panel.

2. Double-click the Cisco Connect icon.

You can find more help from our award-winning customer support at linksys.com/support. The Cisco Connect main menu opens.

Linksys E-Series Troubleshooting Your router was not successfully set up

Temporarily disable your computer’s firewall (see the security software’s instructions for help), then run the Setup program again on the router’s CD.

If you have another computer, use that computer to run the Setup program again on the router’s CD. Get Windows XP Service Pack 3 message On Windows XP computers, Cisco Connect requires Service Pack 3 in order to work. If you receive a “Get Windows Service Pack 3” message when setting up your router for the first time, follow these troubleshooting steps. If Cisco Connect did not complete the setup, you can try the following:

Press and hold the Reset button on your router with a paperclip or pin for 10-15 seconds, then run the Setup program again on the router’s CD. If the currently installed Service Pack is older than version 3, you need to download and install Service Pack 3. TIP To temporarily connect to the Internet and download the required Service Pack, you can use the included Ethernet cable to connect your computer directly to your modem. To install Service Pack 3:

1. Click the link in the Cisco Connect error message or connect to the

Microsoft Update website (update.microsoft.com/windowsupdate).

2. Follow the instructions on the website or contact Microsoft if you need

further help. Your router’s appearance may vary

3. After downloading and installing Service Pack 3, run the Setup program

on your router’s CD.

Linksys E-Series Troubleshooting Your Internet cable is not plugged in message If you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps. Back view of cable modem Back view of DSL modem

2. Make sure that your modem is connected to power and is turned on. If it

has a power switch, make sure that it is set to the ON or l position.

3. If your Internet service is cable, verify that the cable modem’s CABLE port

is connected to the coaxial cable provided by your ISP. To fix the problem:

1. Make sure that an Ethernet or Internet cable (or a cable like the one

supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet, but may be named Internet or WAN. Or, if your Internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port.

4. If your computer was previously connected to your modem with a USB

cable, disconnect the USB cable.

5. Return to the Cisco Connect window and click Next to try again. If the

window has already been closed, run the Setup program again on the router’s CD. Back view of router

Linksys E-Series Cannot access your router message If you cannot access your router because your computer is not connected to your network, follow these troubleshooting steps. Troubleshooting

3. Click your own network name, then click Connect. In the example

below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected. To access your router, you must be connected to your own network. If you currently have wireless Internet access, the problem may be that you have accidentally connected to a different wireless network. To fix the problem on Windows computers:

1. On your Windows desktop, right-click the wireless icon in the system tray.

4. If you are prompted to enter a network key, type your password (Security

Key) into the Network key and Confirm network key fields, then click Connect.

2. Click View Available Wireless Networks. A list of available networks

appears. Your computer connects to the network, and you should now be able to access the router.

Linksys E-Series To fix the problem on Mac computers:

1. In the menu bar across the top of the screen, click the AirPort icon. A list

of wireless networks appears. Cisco Connect has automatically assigned your network a name. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys E-Series network, BronzeEagle in this example, is shown selected.

2. Click the wireless network name of your Linksys E-Series router

(BronzeEagle in the example).

3. Type your wireless network password (Security Key) into the Password

field, then click OK. Troubleshooting Device not found message If you get a “Device not found” message when trying to connect a network device (such as an iPhone, iPod, or smartphone), follow these troubleshooting steps. TIP For a stronger signal during initial setup, move your wireless devices near your router. Long distances make it harder for the router to detect the devices. To fix the problem:

1. Run Cisco Connect.

2. Click Computers and devices. The Computers and other devices window

3. Click Other Wireless devices.

Troubleshooting Example: On your Smartphone or other wireless device, locate the WiFi menu and search for available wireless networks. In this example, using the network information provided by Cisco Connect shown in the previous screen, click BronzeEagle. Android

4. Enable your wireless network device’s Wi-Fi connection, then search for

your wireless network name. See your device documentation for help. Note Your wireless device must support WPA/WPA2.

5. On the wireless network device, select the network name of your router

and enter the password (Security Key).

6. In Cisco Connect, click Next.

7. Enter the password (Security Key) provided by Cisco Connect. In this

example, the security key is B6eM9UkCjz. Note The password is case sensitive. Make sure that you enter letters in the correct case.

8. When your wireless device is successfully connected to your wireless

network, enter a name for the device in Cisco Connect, then click Finish.

Linksys E900 Specifications Specifications Linksys E900 Environmental Dimensions FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Power/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Operating Temp. 0 to 40°C (32 to 104°F) Storage Temp. -20 to 60°C (-4 to 140°F) Cabling Type CAT 5e Operating Humidity Wireless-N Router Model Number E900 Standards Power, Internet, and Ethernet (1-4) Buttons 802.11n (40 MHz):

14.0 ± 1.5dBm @ CH6, MCS 0~4, MCS 8~12

13.5 ± 1.5dBm @ CH6, MCS 5~7, MCS 13~15

14.5 ± 1.5dBm @ CH6, all rates

16.5 ± 1.5dBm @ CH6, all rates

Antenna Gain Wi-Fi Protected Access™ 2 (WPA2), WEP, wireless MAC filtering Security Key Bits Up to 128-bit encryption NoteS For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.

Linksys E1200 Specifications Linksys E1200 Certifications FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Model Name Linksys E1200 Description Wireless-N Router Model Number E1200 Operating Temp. 0 to 40°C (32 to 104°F) Standards Power, Internet, and Ethernet (1-4) Storage Humidity Power/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Cabling Type CAT 5e Transmitted Power NoteS For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. 802.11b:

16.5 ± 1.5dBm @ CH6, all rates

Antenna Gain Wi-Fi Protected Access™ 2 (WPA2), WEP, wireless MAC filtering Security Key Bits Up to 128-bit encryption Environmental Dimensions Power/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Operating Temp. 0 to 40°C (32 to 104°F) Storage Temp. -20 to 60°C (-4 to 140°F) Cabling Type CAT 5e Operating Humidity Wireless-N Router with SpeedBoost Model Number E1500 Standards Power, Internet, and Ethernet (1-4) Buttons Wi-Fi Protected Access 2 (WPA2), WEP, wireless MAC filtering Security Key Bits Up to 128-bit encryption NoteS For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.

Linksys E2500 Specifications Linksys E2500 Environmental Model Name Linksys E2500 Description Advanced Dual-Band N Router Model Number E2500 Standards 4 total, 2 internal antennas per each

2.4 GHz & 5 GHz radio band

Modulation Receive Sensitivity (Typical) Antenna Gain in dBi

2.4 GHz:

Antenna 1 (right rear): ≤2.94 dBi Antenna 2 (front right): ≤3.78 dBi Dimensions NoteS For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. 5 GHz: Antenna 1 (right front): ≤5.86 dBi Antenna 2 (front left): ≤4.88 dBi UPnP Supported Security features

WEP, WPA, WPA2

Security key bits Up to 128-bit encryption

Linksys E3200 Specifications Linksys E3200 Storage File System Support FAT, and NTFS, and HFS+ Model Name Linksys E3200 Environmental Description Maximum Performance Dual-Band N Router Dimensions Model Number E3200 6 total, 3 internal antennas per each 2.4 GHz & 5 GHz radio band Unit Weight

7.62 oz (216 g)

Power 12V, 2A Detachable (y/n)

Certifications Switch Port Speed 10/100/1000 Mbps Operating Temp. 32 to 95°F (0 to 35°C) Ports Internet, Ethernet (1-4), USB, Power Storage Temp. -4 to 140°F (-20 to 60°C) Buttons Power, Ethernet (1-4) 10 to 80% relative humidity, non-condensing Modulation

2.4 GHz

802.11b: -87 dBm @ 11 Mbps (Typical) 802.11g: -77 dBm @ 54 Mbps (Typical) 802.11n (20 MHz): -71 dBm @ MCS15 (Typical) 802.11n (40 MHz): -68 dBm @ MCS15 (Typical) 5 GHz 802.11a: -75 dBm @ 54 Mbps (Typical) 802.11n 20 MHz: -70 dBm @ MCS15 (Typical) 802.11n 40 MHz: -67 dBm @ MCS15 (Typical) Antenna Gain NoteS For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. Security key bits Up to 128-bit encryption

Linksys E4200 Specifications Linksys E4200 Supported File Systems for Storage Device FAT32, NTFS, and HSF+ Model Name Linksys E4200 UPnP Supported Description Maximum Performance Wireless-N Router Security Features

WEP, WPA, WPA2

Model Number E4200 Security Key Bits Up to 128-bit encryption Standards Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) Power, USB, Internet, Ethernet (1-4) Unit Weight

12.7 oz (0.36 g)

Buttons Top panel: Power Back panel: Internet, Ethernet (1-4) Certifications Number of Antennas 6 total, 3 internal antennas per each 2.4 GHz and 5 GHz radio band

Operating Temp. 32 to 104°F (0 to 40°C) Storage Temp. -4 to 140°F (-20 to 60°C) Operating Humidity 10 to 80% relative humidity, non-condensing Storage Humidity Antenna Gain in dBi

2.4 GHz (3 internal PIFA antennas)

PIFA 1 ≤ 2.5 dBi (Right) PIFA 2 ≤ 2.31 dBi (Front) PIFA 3 ≤ 2.99 dBi (Left) 5 GHz (3 internal PIFA antennas) PIFA 1 ≤ 3.84 dBi (Right) PIFA 2 ≤ 4.19 dBi (Front) PIFA 3 ≤ 3.49 dBi (Left) NoteS For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.

Visit linksys.com/support for award-winning technical support Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. All other trademarks mentioned in this document are the property of their respective owners. © 2011 Cisco and/or its affiliates. All rights reserved. 3425-TBD Serie E WPA2/WPA Enterprise mixto, WPA2 Enterprise, WPA Enterprise WEP Router Wireless-N FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Router Wireless-N FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 10/100/1000 Mbps (Gigabit Ethernet) WPA2/WPA Enterprise Mixed Mode (Modo WPA2/WPA Enterprise mixto) WPA2/WPA Mixed Mode (Modo WPA2/WPA mixto), WPA2 Personal y WPA Personal WPA2/WPA Mixed Mode (Modo WPA2/WPA mixto) Router Wireless-N Router Wireless-N Linksys E-Series Sisällysluettelo Linksys E-Series Tuotteen yleiskatsaus Tuotteen yleiskatsaus

Wi-Fi Protected Setup -painike Linksys E-Series Tuotteen yleiskatsaus E4200 Näkymä takaa Näkymä ylhäältä Ethernet-portit Internet-portti Virtaliitäntä Wi-Fi Protected Setup -painike Nollauspainike USB-portti

Linksys E-Series Linksys E-Series Lisämääritykset Linksys E-Series Linksys E-Series Lisämääritykset Linksys E-Series WPA2/WPA Mixed Mode WPA2/WPA Enterprise Mixed Mode Linksys E-Series Linksys E-Series Linksys E-Series Vianmääritys Linksys E-Series Vianmääritys Linksys E-Series Vianmääritys Linksys E-Series FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Virta/Wi-Fi Protected Setup, Internet, Ethernet (1–4) Käyttölämpötila 0–40 °C (32–104 °F) Säilytyslämpötila -20–60 °C (-4–140 °F) Kaapelin tyyppi: CAT 5e Käyttöympäristön ilmankosteus 10–80 %, kondensoitumaton Lähetysteho Wireless-N-reititin Mallinumero E900 Standardit FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Mallinimi Linksys E1200 Kuvaus Wireless-N-reititin Mallinumero E1200 Käyttölämpötila 0–40 °C (32–104 °F) Standardit Virta/Wi-Fi Protected Setup, Internet, Ethernet (1–4) Kaapelin tyyppi: CAT 5e Lähetysteho Virta/Wi-Fi Protected Setup, Internet, Ethernet (1–4) Käyttölämpötila 0–40 °C (32–104 °F) Säilytyslämpötila -20–60 °C (-4–140 °F) Kaapelin tyyppi: CAT 5e Käyttöympäristön ilmankosteus 10–80 %, kondensoitumaton Lähetysteho Advanced Dual-Band N -reititin Mallinumero E2500 Standardit High Performance Dual-Band N -reititin Mallinumero E3200 Standardit Internet, Ethernet (1–4), USB, virta Säilytyslämpötila -20–60 °C (-4–140 °F) Painikkeet Virta, Ethernet (1–4) Maximum Performance Wireless-N -reititin Suojausominaisuudet

WEP, WPA, WPA2

Mallinumero E4200 10/100/1000 Mbps (Gigabit Ethernet) Power, USB, Internet, Ethernet (1-4) Laitteen paino 360 g Painikkeet Telstra Cable (Câble Telstra) Telstra Cable (Câble Telstra) WPA2/WPA mode mixte, WPA2 personnel, WPA personnel WPA2/WPA Enterprise Mixed Mode (Mode mixte WPA2/WPA entreprise) Réinitialisation, Wi-Fi Protected Setup™ Alimentation / Wi-Fi Protected Setup, Internet, Ethernet (1-4) FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g), WPA2™, WMM,®, Wi-Fi Protected Setup™, Windows 7 Réinitialisation, Wi-Fi Protected Setup™ Alimentation / Wi-Fi Protected Setup, Internet, Ethernet (1-4) FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g), WPA2™, WMM,®, Wi-Fi Protected Setup™, Windows 7 Alimentation / Wi-Fi Protected Setup, Internet, Ethernet (1-4) Internet, Ethernet (1 - 4), USB, Alimentation Conditions environnementales Boutons Alimentation, Ethernet (1-4) Modulation Telstra Cable (Câble Telstra) Telstra Cable (Câble Telstra)

Alimentation, Ethernet (1-4) Modulations WPA2/WPA Mixed Mode WPA2/WPA Enterprise Mixed Mode FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Üzemi hőmérséklet FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Típusnév Linksys E1200 Leírás 10/100/1000 Mb/s (Gigabit Ethernet) Linksys E-Series Daftar Isi Linksys E-Series Ikhtisar produk Ikhtisar produk

Port daya Port USB (hanya E3200) Port Internet Port Ethernet Indikator daya Tombol Wi-Fi Protected Setup Linksys E-Series Ikhtisar produk E4200 Tampak belakang Tampak atas Port Ethernet Port Internet Port daya Tombol Wi-Fi Protected Setup Tombol reset Port USB

Linksys E-Series Menyetel Router E-Series Anda Linksys E-Series Linksys E-Series Static IP (IP Statis)

Telstra Cable Wireless Settings (Setelan Nirkabel) Linksys E-Series Linksys E-Series WPA2 Personal (WPA2 Pribadi) Terkuat WPA2/WPA Mixed Mode (WPA2/ WPA Mode Campuran) WPA Personal (WPA Pribadi) Kuat WEP Dasar WPA2/WPA Enterprise Mixed Mode (WPA2/WPA Enterprise Mode Campuran) Linksys E-Series Linksys E-Series Pemecahan Masalah Linksys E-Series Linksys E-Series Pemecahan Masalah Linksys E-Series FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Daya/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Suhu Pengoperasian Router Wireless-N Nomor Model E900 Standar WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Nama Model Linksys E1200 Suhu Pengoperasian Router Wireless-N Suhu Penyimpanan Daya/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Jenis Kabel CAT 5e Daya Transmisi Daya/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Suhu Pengoperasian Router N Dual-Band Modern Nomor Model E2500 Standar Internet, Ethernet (1-4), USB, Daya Suhu Pengoperasian Daya, Ethernet (1-4) Kelembapan Pengoperasian Modulasi 10/100/1000 Mbps (Gigabit Ethernet) Daya, USB, Internet, Ethernet (1-4) Berat Unit 360 g (12,7 oz) Tombol Linksys E-Series Sommario Wireless Security (Protezione wireless) Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Configurazione avanzata Linksys E-Series Static IP (IP statico)

Telstra Cable (Cavo Telstra) Linksys E-Series Configurazione avanzata Static IP (IP statico) Telstra Cable (Cavo Telstra) Linksys E-Series Configurazione avanzata Linksys E-Series Wireless Security (Protezione wireless) WPA2 Personal WPA2/WPA Mixed Mode (Modalità mista WPA2/WPA) WPA Personal WEP Strongest (Massima) WPA2: Strongest (Massima) WPA: Strong (Efficace) Efficace Basic (Standard) WPA2 Enterprise WPA2/WPA Enterprise Mixed Mode (Modalità mista WPA2/WPA Enterprise) WPA Enterprise RADIUS Strongest (Massima) WPA2: Strongest (Massima) WPA: Strong (Efficace) Efficace Basic (Standard)

Linksys E-Series Wireless Security (Protezione wireless) RADIUS Disabilitato Linksys E-Series Linksys E-Series Messaggio Get Windows XP Service Pack 3 (Installa Windows XP Service Pack 3) Linksys E-Series Linksys E-Series Router Wireless-N Numero modello E900 Standard Wi-Fi Protected Access™ 2 (WPA2), WEP, filtraggio MAC Wireless FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Temperatura d’esercizio WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Nome modello Linksys E1200 Temperatura d'esercizio Router Wireless-N Numero modello E1200 Wi-Fi Protected Access™ 2 (WPA2), WEP, filtraggio MAC Wireless Wi-Fi Protected Access 2 (WPA2), WEP, filtraggio MAC Wireless 10/100/1000 Mbps (Gigabit Ethernet) Porte Cisco Connect starten Static IP (Vast IP-adres)

Telstra Cable WPA2/WPA gemengde modus WPA-Personal WEP Sterkte Specificaties Linksys E900 Omgeving Modelnaam Linksys E900 Omschrijving Wireless-N Router Modelnummer E900 Standaarden FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Power/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Opslagtemperatuur -20 tot 60 °C Type bekabeling CAT 5e Bedrijfsvochtigheid WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Modelnaam Linksys E1200 Bedrijfstemperatuur 0 tot 40 °C Omschrijving Wireless-N Router Opslagtemperatuur -20 tot 60 °C Modelnummer E1200 Bedrijfsvochtigheid Power/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Type bekabeling CAT 5e Uitzendvermogen FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Power/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Opslagtemperatuur -20 tot 60 °C Type bekabeling CAT 5e Bedrijfsvochtigheid Antenneversterking in dBi Internet, Ethernet [1-4], USB, Voeding Bedrijfstemperatuur 0 tot 40 °C Knoppen Voeding, Ethernet (1-4) Bedrijfsvochtigheid Modulatie 10/100/1000 Mbps (Gigabit Ethernet) Poorten Antenneversterking in dBi Strøm-port USB-port (bare for E3200) Internett-port Ethernet-porter Indikatorlys for strøm ikonet for Setup (Oppsett). WPA2/WPA Mixed Mode WPA2/WPA Enterprise Mixed Mode Strøm/Wi-Fi Protected Setup, Internett, Ethernet (1-4) FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Driftstemperatur 0–40 °C (32–104 °F) Kabeltype CAT 5e Oppbevaringstemperatur -20–60 °C (-4–140 °F) Overført effekt Luftfuktighet for drift Wireless-N-ruter Modellnummer E900 Standarder Reset (Tilbakestill), Wi-Fi Protected Setup™ LED-lamper WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Modellnavn Linksys E1200 Driftstemperatur 0–40 °C (32–104 °F) Beskrivelse Wireless-N-ruter Oppbevaringstemperatur -20–60 °C (-4–140 °F) Modellnummer E1200 Luftfuktighet for drift Reset (Tilbakestill), Wi-Fi Protected Setup™ LED-lamper Strøm/Wi-Fi Protected Setup, Internett, Ethernet (1-4) Kabeltype CAT 5e Overført effekt Strøm/Wi-Fi Protected Setup, Internett, Ethernet (1-4) Driftstemperatur 0–40 °C (32–104 °F) Oppbevaringstemperatur -20–60 °C (-4–140 °F) Kabeltype CAT 5e Luftfuktighet for drift Reset (Tilbakestill), Wi-Fi Protected Setup LED-lamper Luftfuktighet for drift Internett, Ethernet [1–4], USB, strøm Oppbevaringstemperatur -20–60 °C (-4–140 °F) Knapper Reset (Tilbakestill), Wi-Fi Protected Setup Luftfuktighet for drift LED-lamper Strøm, Ethernet (1–4) Reset (Tilbakestill), Wi-Fi Protected Setup Strøm 12 V, 2A LED-lamper Luftfuktighet for drift Modulasjoner Linksys E-Series Spis treści Linksys E-Series Opis produktu Linksys E-Series Opis produktu E4200 Widok z tyłu Widok z góry Porty Ethernet Port internetowy Port zasilania Linksys E-Series Linksys E-Series Konfiguracja zaawansowana Linksys E-Series Linksys E-Series

Konfiguracja zaawansowana Linksys E-Series Linksys E-Series Linksys E-Series Rozwiązywanie problemów Linksys E-Series Rozwiązywanie problemów Linksys E-Series Rozwiązywanie problemów Linksys E-Series Linksys E-Series Rozwiązywanie problemów FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Zasilanie/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Temp. pracy FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Zasilanie/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Temp. pracy Zasilanie/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Temp. przechowywania Modo misto WPA2/WPA WPA Personal WEP Força FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Router Sem Fios N Reset (Repor), Wi-Fi Protected Setup™ LEDs WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Nome do modelo Linksys E1200 Router Sem Fios N Reset (Repor), Wi-Fi Protected Setup™ LEDs Reset (Repor), Wi-Fi Protected Setup LEDs FAT e NTFS e HFS+ Ambiente Dimensões Linksys E-Series Sumário Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Configuração avançada Linksys E-Series Telstra Cable (Cabo Telstra) Telstra Cable (Cabo Telstra) Linksys E-Series Configuração avançada Linksys E-Series WPA2 Personal (WPA2 pessoal) WPA2/WPA Mixed Mode (Modo misto WPA2/WPA) WPA Personal (WPA pessoal) Resistente WEP Básica WPA2/WPA Enterprise Mixed Mode Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Energia/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Temp. operacional Power, Internet e Ethernet (1-4) Botões 802.11n (40 MHz): 14,0 ± 1,5 dBm @ CH6, MCS 0~4, MCS 8~12 13,5 ± 1,5 dBm @ CH6, MCS 5~7, MCS 13~15 802.11g: 14,5 ± 1,5 dBm @ CH6, todas as taxas 802.11b: 16,5 ± 1,5 dBm @ CH6, todas as taxas Ganho de antena FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Nome do modelo Linksys E1200 Descrição Power, Internet e Ethernet (1-4) Energia/Wi-Fi Protected Setup, Internet, Ethernet (1-4) 802.11n (20 MHz): 15,0 ± 1,5 dBm @ CH6, MCS 0~4, MCS 8~12 13,5 ± 1,5 dBm @ CH6, MCS 5~7, MCS 13~15 802.11n (40 MHz): 14,0 ± 1,5 dBm @ CH6, MCS 0~4, MCS 8~12 13,5 ± 1,5 dBm @ CH6, MCS 5~7, MCS 13~15 802.11g: 14,5 ± 1,5 dBm @ CH6, todas as taxas 802.11b: 16,5 ± 1,5 dBm @ CH6, todas as taxas Energia/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Temp. operacional Power, Internet e Ethernet (1-4) Botões Internet, Ethernet (1-4), USB, Energia Temp. operacional Energia, Ethernet (1-4) Umidade operacional Power, USB, Internet, Ethernet (1-4) Botões Specificaţii Linksys E900 . . Linksys E1200 . Linksys E1500 . Linksys E2500 . Linksys E3200 . Linksys E4200 .

Static IP (IP static)

Telstra Cable (Cablu Telstra) Telstra Cable (Cablu Telstra)

WPA2 Personal WPA2/WPA Mixed Mode (Mod mixt WPA2/WPA) WPA Personal WEP WPA2 Enterprise WPA2/WPA Enterprise Mixed Mode (Mod mixt WPA2/WPA Enterprise) WPA Enterprise RADIUS Se deschide meniul principal Cisco Connect.

FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Alimentare/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Alimentare/Wi-Fi Protected Setup, Internet, Ethernet (1-4) FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Alimentare/Wi-Fi Protected Setup, Internet, Ethernet (1-4) 2,4 GHz: Antena 1 (dreapta spate): ≤ 2,94 dBi Antena 2 (dreapta faţă): ≤ 3,78 dBi Dimensiuni Linksys E3200 Nume model Linksys E3200 Descriere FAT, NTFS şi HFS+ 10/100/1000 Mbps (Gigabit Ethernet) Linksys E-Series

Linksys E-Series Обзор продукта Обзор продукта

Linksys E-Series Обзор продукта E4200

Порты Ethernet Интернет-порт Порт питания Linksys E-Series Linksys E-Series Дополнительная настройка Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Gumb Wi-Fi Protected Setup Gumb Wi-Fi Protected Setup FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Napajanje/Wi-Fi Protected Setup, Internet, Ethernet (1–4) FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Napajanje/Wi-Fi Protected Setup, Internet, Ethernet (1–4) Napajanje/Wi-Fi Protected Setup, Internet, Ethernet (1–4) FAT, NTFS in HFS+ Ime modela Linksys E3200 Opis FAT32, NTFS in HSF+ FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Ström/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Wireless-N-router Modellnummer E900 Standarder FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Ström/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Wireless-N-router Modellnummer E1200 Standarder Ström/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Internet, Ethernet (1-4), USB, ström Ström, Ethernet (1-4) 10/100/1 000 Mbit/s (Gigabit Ethernet) Vikt 360 g Portar Ström, USB, Internet, Ethernet (1-4) Strömförsörjning 12 V, 2A Knappar Linksys E-Series

Linksys E-Series ภาพรวมผลิตภัณฑ์ ภาพรวมผลิตภัณฑ์ Linksys E-Series ภาพรวมผลิตภัณฑ์ E4200

พอร์ตอีเธอร์เน็ ต พอร์ตอินเทอร์เน็ ต พอร์ตจ่ายไฟ Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series การรักษาความปลอดภัยแบบไร ้สาย WPA2/WPA Mixed Mode WPA2/WPA Enterprise Mixed Mode Linksys E-Series การรักษาความปลอดภัยแบบไร ้สาย RADIUS Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7

FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Linksys E-Series İçindekiler Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Gelişmiş Yapılandırma Linksys E-Series Static IP (Statik IP)

Telstra Cable (Telstra Kablosu) Linksys E-Series Gelişmiş Yapılandırma Linksys E-Series Kablosuz Güvenliği WPA2 Personal (WPA2 Kişisel) En güçlü WPA2/WPA Mixed Mode (WPA2/WPA Karma Modu) WPA Personal (WPA Kişisel) Güçlü WEP Temel WPA2 Enterprise (WPA2 Şirket) En güçlü WPA2/WPA Enterprise Mixed Mode (WPA2/WPA Karma Modu) WPA Enterprise (WPA Şirket) Güçlü RADIUS Temel Linksys E-Series Kablosuz Güvenliği RADIUS Linksys E-Series Sorun Giderme Linksys E-Series Sorun Giderme Linksys E-Series Sorun Giderme Linksys E-Series FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Çalışma Sıcaklığı

0 - 40 °C (32 - 104 °F)

Depolama Sıcaklığı -20 - 60 °C (-4 - 140 °F) FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Çalışma Sıcaklığı

0 - 40 °C (32 - 104 °F)

Depolama Sıcaklığı -20 - 60 °C (-4 - 140 °F) Wi-Fi Protected Access 2 (WPA2), WEP, kablosuz MAC filtreleme Yüksek Performanslı Dual-Band N Router Model Numarası E3200 Standartlar Güç, Ethernet (1-4), 10/100/1000 Mbps (Gigabit Ethernet) Çevresel Portlar FAT32, NTFS ve HSF+ Boyutlar Üst panel: Güç Arka panel: Internet, Ethernet (1-4) Güç 12V, 2A Anten Sayısı FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802,11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802,11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Linksys E-Series Mục lục Linksys E-Series Linksys E-Series E4200 Mặt sau Mặt trên Cổng Ethernet Cổng Internet Cổng nguồn Linksys E-Series Linksys E-Series Linksys E-Series Static IP (IP tĩnh)

Telstra Cable (Cáp Telstra) Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series RADIUS Disabled (Tắt) Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series Linksys E-Series FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Nguồn/Wi-Fi Protected Setup, Internet, Ethernet (1-4) FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi (IEEE 802.11b/g/n), WPA2™, WMM®, Wi-Fi Protected Setup, Windows 7 Nguồn/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Nguồn/Wi-Fi Protected Setup, Internet, Ethernet (1-4) Internet, Ethernet (1-4), USB, Nguồn Nút 10/100/1000 Mbps (Gigabit Ethernet) Cổng Nguồn, USB, Internet, Ethernet (1-4) Nút FAT32, NTFS, and HSF+ UPnP Có hỗ trợ