Ceramiccare 10in1 Airbrush Gyro - Curling iron CECOTEC - Free user manual and instructions

Product type	Rotating hot air brush with 10 accessories (curling iron)
Brand	Cecotec
Model	Ceramiccare 10in1 Airbrush Gyro
Reference	EU01_122180
Power supply	220–240 V~, 50 Hz
Power	900–1100 W
Number of modes	3 modes: medium temperature air with low speed, high temperature air with high speed, gentle temperature air with high speed
Accessory rotation	Yes, in both directions for 19 mm, 30 mm and 40 mm attachments
Heating technology	Ceramic coating
Power cord	360° swivel for optimal maneuverability
Included accessories	Diffuser, concentrator nozzle, brushes of 30, 33, 40 and 70 mm, volumizing comb for roots, smoothing brush, curlers of 19 and 30 mm
Material	Ceramic body, metal barrel, rounded bristles
Maintenance	Removable air inlet grille, clean with a soft damp cloth, do not immerse
Use	Household use only, do not use near water
Warranty	Official Cecotec After-Sales Service, [phone]
Compliance	Compliant with EU regulations, declaration available online
Origin	Designed in Spain, manufactured in China

Frequently Asked Questions - Ceramiccare 10in1 Airbrush Gyro CECOTEC

How to turn on the CeramicCare 10in1 Airbrush Gyro hot air brush?

Plug the appliance into a grounded outlet. Slide the on/off/mode selection switch upward to turn on the brush. You can then choose from 3 modes: medium temperature air with low speed, high temperature air with high speed, gentle temperature air with high speed. To turn off, slide the switch to the lowest position.

How to install and remove the attachments?

To install an attachment, align the groove on the attachment with the one on the handle and push until you hear a click. To remove it, press the release buttons on each side and pull upward. Do not force it: if the attachment resists, check that both buttons are fully pressed in.

What attachments are included with the hot air brush?

The brush comes with 10 attachments: a diffuser, a concentrator nozzle, brushes of 30 mm, 33 mm, 40 mm and 70 mm, a volumizing comb for roots, a smoothing brush, and curlers of 19 mm and 30 mm. These attachments allow you to straighten, add volume, create curls, and dry hair.

How to use the rotation function?

The rotation function is available for 19 mm, 30 mm and 40 mm attachments. After installing the attachment and turning on the appliance, press one of the rotation buttons to rotate the attachment in one direction, or the other button for the opposite direction. Release the button to stop rotation.

How to create curls with the curler?

Take a lock of hair that is still slightly damp. Place the section obliquely on the curler attachment, then turn it while sliding the hair along the attachment. Use the rotation function to wrap the hair evenly. Caution: do not wrap the hair perpendicularly, as it may tangle.

How to clean the air inlet grille?

Unplug the appliance. Remove the air inlet grille by pulling on the tabs. Use a soft brush or a cotton swab to remove dust and hair. You can also wipe the grille with a soft, slightly damp cloth. Never immerse the appliance in water.

What safety precautions should be observed?

Do not use the appliance near water (bathtub, shower, sink). Do not immerse it. Do not block the air inlets and outlets. Avoid direct contact with the face, neck, and scalp. Keep out of reach of children under 8 years old. Regularly check the condition of the power cord.

How to dry hair with the hot air brush?

Wash and towel-dry your hair to remove excess moisture. Divide the hair into sections. Pre-dry the roots with a hair dryer. Take a section and run the brush from roots to ends, directing the air toward the hair and not the scalp. To avoid overdrying, do not stay too long on the same area.

How to maintain the power cord?

Regularly inspect the cord for any damage. Do not twist, bend, or stretch it. Avoid wrapping it around the appliance for storage. Use the designated holder or store it loosely. If the cord is damaged, have it replaced by the official Cecotec technical service.

What to do if the appliance does not work properly?

Check that the appliance is properly plugged into a working outlet and that the switch is in a position other than off. Make sure the air inlet is not blocked. Let the appliance cool down if it has overheated. If the problem persists, do not attempt to repair it yourself: contact the official Cecotec After-Sales Service at [phone].

USER MANUAL Ceramiccare 10in1 Airbrush Gyro CECOTEC

ESPAÑOL	40
ENGLISH	46
FRANÇAIS	52
DEUTSCH	58
ITALIANO	64
PORTUGUÊS	70
NEDERLANDS	76
POLSKI	82
ČEŠTINA	88
MAGYAR	94
ΕΛΛΗΝΙΚΑ	100
TÜRKÇE	106
العربية	112
CATALÀ	117
FIGURES	123

NOTA

EU01_122180 CeramicCare 10in1 AirBrush Gyro

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read the following instructions carefully before using the appliance. Keep this instruction manual for future reference or new users.

• All safety instructions must be closely followed when using the appliance.

• Ensure that the mains voltage matches the voltage specified on the appliance rating label and that the plug is earthed.

• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.

• If the appliance is to be used in a bathroom, it must be unplugged from the wall socket after use, as the proximity to water could be a risk even with the appliance switched off.
• As additional protection, it is recommended that a Residual Current Device (RCD) having a rated operating fault current not exceeding 30 mA be installed in the electrical circuit supplying the bathroom. We recommend you ask a qualified installer for advice.
• This appliance can be used by children aged from 8 years and above and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by unsupervised children.

• This symbol means that the appliance must not be used in bathtubs, showers, or any other water-filled tank.
• WARNING: do not use this appliance near bathtubs, showers, sinks or other containers filled with water.

- Do not immerse the cord, plug, or any other non-removable part of the appliance in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.

• This symbol means: "Caution, hot surface".
- Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by Cecotec's Official Technical Support Service to avoid any danger.
- Ensure that the air inlets and outlets are not blocked.
- Turn off and unplug the appliance from the power supply immediately after use.
- Immediately unplug the appliance from the socket in these cases:
- Abnormal operation.
- Cleaning.
- After use.
- Do not insert metal objects through the air inlets to avoid electric shocks.
- Do not wind the power cord around the appliance.
- Keep your face, neck, and scalp away from the appliance.
- Do not leave the appliance on any surface while in operation.
- Do not use the appliance to comb wigs, natural hair extensions, fake hair, or animal hair.
- The air inlet ensures good ventilation of the appliance. Do not cover or obstruct it, as this may cause

overheating.

- Do not insert objects in the air inlet.

https://cecotec.es/es/information/declaration-of-conformity

1. Parts and components

Fig. 1

1. Air outlet
2. Attachment release buttons
3. Rotation buttons
4. On/off/mode selection switch
5. Air inlet grille
6. 360° swivel cord
7. Diffuser attachment
8. Concentrator nozzle
9. 40 mm brush
10. 70 mm styling brush
11. Root volumising comb
12. 30 mm brush
13. Straightening brush
14. 30 mm curling tongs
15. 19 mm curling tongs
16. 33 mm brush

NOTE:

The graphics in this manual are schematic representations and may not exactly match the product.

2. Before use

• This appliance comes in a packaging designed to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec's Official Technical Support Service immediately.

Box content

• Hot air brush
• 10 attachments
• Instruction manual

- Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

3. Operation

1. Make sure that the mains voltage matches the voltage specified on the product's rating label and that the plug is earthed. Plug the appliance into the mains.
2. Slide the on/off/mode selection switch upwards to turn on the brush. Set the switch to the desired mode.
3. The brush features 3 different airflow modes: medium temperature and low speed, high temperature and high speed, and gentle temperature and high speed.
4. Slide the on/off/mode selection switch to the lowest position to turn off the appliance.

Fitting the attachments

• To fit an attachment, place it onto the brush handle by aligning the front slot and press until you hear a click.
• To remove the attachment, press the attachment release buttons. Then pull the attachment upwards to separate it from the handle.

WARNING:

Do not force the removal of the attachment, as this could break the locking mechanism. If it offers too much resistance when removing, ensure both release buttons are fully pressed.

Attachment rotation

The rotation function is only available for the 19/30 mm curling tongs and 30/40 mm brushes.

• Once the attachment is fitted and the brush is turned on, press one of the rotation buttons to rotate the attachment in that direction.
• Press the other button to rotate the attachment in the opposite direction.
  ● Release the rotation button to stop the attachment from rotating.

Using the brush

Basic hair drying tips:

1. Wash your hair with shampoo and towel-dry to remove excess moisture, then section your hair.
2. Dry the roots with a hairdryer before using the brush.
3. Take a section of hair and pass the brush from roots to tips, always directing the airflow towards the hair, not the scalp.

ENGLISH

1. To prevent over-drying, do not concentrate heat on a single section of hair for too long. Keep the brush moving while in use.
2. When reaching the ends, you can use the rotation function to style them. You can also use this function to style shorter sections of hair such as fringes.
3. To curl hair, place the section diagonally across the brush attachment and rotate it so that the hair slides over the attachment and then over the handle.

WARNING: Do not wrap hair perpendicular to the brush, as it may become tangled.

WARNING: Keep the brush's air inlet grille clean and unobstructed.

Attachments

● Diffuser: use this attachment to dry and define curls.
● Concentrator: this nozzle concentrates the airflow to dry small areas of your hair.
- 70 mm styling brush: Large round brush with metal barrel and rounded tips for all types of hairstyles: straightening, volume and curls.
- Root volumising comb: The corrugated nozzle concentrates the airflow to add volume to small areas of your hair.
- 40/30 mm brushes: Round brush with metal barrel and rounded tips for all types of hairstyles: straightening, volume and curls.
● Hair straightening brush: Brush that, by quickly drying the hair, allows you to massage it to stimulate the roots and improve blood circulation in the scalp.
● 30/19 mm curling tongs: this hair accessory helps to wave the hairstyle naturally.
- 33 mm brush: The bristles can be retracted, allowing the brush to be easily removed once the curl has dried.

4. Cleaning and maintenance

Notice: Before performing any of the following operations, ensure the brush is unplugged from the mains.

• Remove any hair residue or dirt trapped between the bristles using a comb or small brush.
• Gently clean the ceramic barrel and bristles with a soft, slightly dampened cloth. Do not use chemical products or abrasive detergents that could damage the ceramic surface.
• Use a soft, damp cloth to clean the product's surface.
  ● You can remove the air inlet grille by pulling the tabs. Use a soft brush or cotton

ENGLISH

bud to clean the air inlet.

● Never immerse the device in water or other liquids.
- Do not use scouring pads, powders, or abrasive cleaning products to clean the product.
- Do not twist, bend, stretch, or damage the power cord.
● Clean any dirt and hair that may block the appliance.

Storage

● Store the brush in a dry place protected from dust.
● Avoid wrapping the power cord around the brush, as this could damage it.

5. Troubleshooting

Problem	Possible causes
The device does not work properly.	Check if it is properly connected to the mains.
	Make sure it is not in the off position.
	Check the plug, contact Cecotec's Official Technical Support Service.
Hot air does not come out.	Make sure it is not in the cool air position.
	Turn off and unplug the appliance from the mains and allow it to cool properly.
	Before turning it on again, check there is nothing obstructing the air inlet.

WARNING:

Do not attempt to repair the appliance yourself. If the problem persists after performing the checks described above, please contact the retailer where you purchased the product, or Cecotec's Official Technical Support Service.

6. Disposal of old electrical and electronic appliances

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its service life, you must remove the batteries/accumulators and take it to a collection point designated by local authorities.

For detailed information on how to properly dispose of electrical and electronic equipment and/or the corresponding batteries, consumers should contact their local authorities.

Information regarding national packaging recycling systems and their marking can be found on our website.

Compliance with the above guidelines will help protecting the environment.

7. Copyright

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

8. Simplified EU Declaration of Conformity

Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested in compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website:

https://cecotec.es/es/information/declaration-of-conformity

9. Technical specifications

Product name: CeramicCare 10in1 AirBrush Gyro

Product reference: EU01_122180

Power: 900-1100 W

Voltage: 220–240 V\~

Frequency: 50 Hz

Technical specifications may change without prior notice to improve product quality.

Made in China | Designed in Spain

10. Technical support and warranty

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of product delivery under the terms, conditions and deadlines established by applicable regulations.

Repairs should be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec's Official Technical Support Service at [phone].

FRANÇAIS

https://storececotec.it/it/information/declaration-of-conformity

https://cecotec.es/es/information/declaration-of-conformity

9. Műszaki adatok

Termék neve: CeramicCare 10in1 AirBrush Gyro

https://cecotec.es/es/information/declaration-of-conformity

9. المواصفات الفنية

CeramicCare 10in1 AirBrush Gyro : اسم

https://cecotec.es/es/information/declaration-of-conformity

www.cecotec.es