Ceramiccare 5in1 Pro Explorer - Curling iron CECOTEC - Free user manual and instructions

Product type	Professional 5-in-1 curling iron
Brand	Cecotec
Model	Ceramiccare 5in1 Pro Explorer
Functions	5 interchangeable attachments for curling, waving and spiral curls
Coating	CeramicCare ceramic technology
Maximum temperature	200 °C
Heating	Ready to use in 30 seconds
Power	68 W
Power supply	AC 220-240 V ~ 50-60 Hz
Power cord	Length 1.8 m, 360° swivel
Dimensions (approx.)	31 x 4 x 4 cm
Net weight	Approximately 0.35 kg
Safety	Automatic shutdown after 60 minutes of inactivity
Safety	Overheating protection
Cleaning	Clean with a damp cloth once the appliance has cooled down
Included accessories	5 styling attachments and 1 thermal glove
Use	Household use only
Warranty	2 years

Frequently Asked Questions - Ceramiccare 5in1 Pro Explorer CECOTEC

How to use the Cecotec Ceramiccare 5in1 Pro Explorer curling iron?

Select the suitable attachment, plug in the device, set the desired temperature and wait 30 seconds. Then wrap dry sections of hair around the barrel and hold for a few seconds. Gently release to get a beautiful curl. Use only on dry hair.

Can I style wet hair with this device?

No, it is essential to use the curling iron on perfectly dry hair. Styling wet hair can damage it and cause burns. For optimal protection, apply a heat protectant spray.

What is the heating time of the Cecotec Ceramiccare 5in1 Pro Explorer?

The heating temperature is reached in about 30 seconds. Once the ready indicator lights up, you can start styling.

How do I adjust the temperature on the curling iron?

Depending on the model, use the adjustment dial or the +/- button to choose the temperature from 120 to 200 °C. The right level depends on your hair type: 120-150 °C for fine hair, 160-200 °C for thick hair.

How do I clean the device?

Always unplug the iron and wait for it to cool completely. Clean the body and accessories with a slightly damp soft cloth, then dry with a dry cloth. Never immerse the device in water.

What should I do if the device does not heat up?

Check that the outlet works and that the cable is properly connected. If the problem persists, contact the official Cecotec after-sales service. The overheating safety system may also have been activated; in that case, unplug the device and let it cool down.

Is it safe to use this curling iron in the bathroom?

You can use it in the bathroom provided you unplug it immediately after use and never leave it within reach of water. Do not touch it with wet hands and never immerse it in water. For maximum safety, always use it in a dry place.

Can I use it on wigs, extensions or artificial hair?

No, this device is designed only for natural hair. Using the iron on synthetic materials or animal hair can damage them or cause accidents.

How to turn off and store the Cecotec Ceramiccare 5in1 Pro Explorer?

After use, turn off the device using the on/off button, then unplug it. Let it cool on a heat-resistant surface before storing the cord. Wrap it loosely and store the iron in its protective case for a few re

Is the cable swivel to prevent knots?

Yes, the power cord is 360° swivel, which allows you to easily rotate the device while styling and avoid kinks. Be careful never to wrap the cord around the iron itself.

USER MANUAL Ceramiccare 5in1 Pro Explorer CECOTEC

Safety instructions 5

1. Parts and components 22

2. Before use 22

3. Operation 22

4. Cleaning and maintenance 23

5. Technical specifications 23

6. Troubleshooting 24

7. Disposal of old electrical appliances 24

8. Technical support and warranty 24

SOMMAIRE

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the outlet is grounded.

This appliance is intended for domestic use only. It is not suitable for commercial or industrial use.

Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid, nor expose the electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.

Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec, in order to avoid any type of danger.

Ensure that the air inlets and outlets are not blocked. If they are blocked, the device will activate the overheat protection system.

Turn off and unplug the device from the power supply immediately after use. If used in a bathroom, make sure to unplug it always to avoid it from getting wet.

Unplug immediately the device from the socket in these cases: Abnormal operating.

Needs ti be cleaned.

After using it.

Do not use the device nearby water or other liquids.

Do not introduce metallic objects through the back grid or air inlets to avoid electric shocks.

Do not wind the cord around the device.

Do not allow the appliance to come into contact with your face, neck or scalp.

Do not leave the appliance on any surface while it is operating.

Do not use the device to comb wigs, natural hair extensions, artificial hair or animal hair.

The appliance is not intended to be used by children under the age of 8. It can be used by children over the age of 8, as long as they are given continuous supervision.

This appliance is not intended to be used by persons with reduced physical, sensory, or mental capabilities, or lack

of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance in a safe way by a person responsible for their safety, and understand the hazards involved.

Do not let children play with the device. Close supervision is necessary when the appliance is being used by or near children.

INSTRUCTIONS DE SÉCURITÉ

1. Power cord
2. Power selector
3. Rotation button
4. Releasing button
5. Interchangeable brush

Fig. 2

1. Comb for straightening hair
2. 40-mm round comb
3. 66-mm round comb
4. 76-mm round comb
5. 47-mm retractable bristles round brush

2. BEFORE USE

Take the product out of the box and remove all packaging material.

Make sure all parts and components are included and in good conditions. If any visible signs of damage are observed, contact Cecotec's Technical Support Service immediately.

3. OPERATION

Wash and condition your hair.

Dry it with a towel and comb it.

Assemble the accessory to be used to the upper part of the air brush. Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the outlet is grounded. Plug the device to a socket.

Warning: A slight odour and smoke might appear when heating the device for the first time.

This is completely normal and it will stop after using the device.

Install the accessory to be used with the slots aligned and turn the accessory to the left. You will hear a click when it is correctly into place. Select level 1 with the power selector to fix your hair with a strong and warm air flux. Select level 2 for a fast drying and combing, or the Cold drying for a soft drying, avoiding your hair from overheating.

After using the device, use hairpsray or foam on your hair.

To remove the accessory, press the releasing button and pull it out gently.

The device includes an automatic-rotation function.

Long press the rotating button so the accessory will rotate to the right or the left.

Unplug the device when it is not longer going to be used.

How to curl the hair

Comb your hair and form locks.

Take a hair lock and brush it with the brush for small locks. Once done, turn the tip inwards or outwards.

Keep this position from 7 to 10 seconds and remove it.

Repeat this step with the rest of your hair.

When finished, shape it using your fingers.

After using

Turn the device off and unplug it.

Place it on a heat-resistant surface until it cools down.

Remove the hair and dust from the device and accessories.

Clean the device with a soft cloth and store it in a dry place.

4. CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the power outlet and allow the appliance to cool down.

Clean the upper part of the device with a soft damp cloth.

Do not immerse the whole unit into water or other liquids.

Do not use abrasive scouring pads, powders or cleaners to clean the product.

Do not twist, bend, strain, or damage the power cord in any way.

Clean the dirt and hairs that may be clogging the device.

5. TECHNICAL SPECIFICATIONS

Product reference: 03446

Product: CeramicCare 5in1 Pro Gyro

Power: 1000 W

Voltage: 220-240V\~, 50/60Hz

Made in China | Designed in Spain

6. TROUBLESHOOTING

Error	Possible causes
It does not work properly.	Check if the device is correctly plugged.Check if it has switched off due to an overheating.Turn the selector to 0, unplug the device and allow it to cool down.Before turning it back on, make sure there is not anything clogging the air inlet.

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimise the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.

The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose of the appliance correctly. If the product has a built-in battery or uses batteries, they should be removed from the appliance and disposed of appropriately.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

8. TECHNICAL SUPPORT AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual.

The warranty will not cover the following situations:

The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer.

The product has been disassembled, modified, or repaired by persons, not authorised by the official Technical Support Service of Cecotec.

Faults deriving from the normal wear and tear of its parts, due to use.

The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at [phone].

1. PIÈCES ET COMPOSANTS

Img. 1