Blendgo Hand Scratchless - Washing machine CECOTEC - Free user manual and instructions

USER MANUAL Blendgo Hand Scratchless CECOTEC

1. Parts and components 10
2. Before use 10
3. Operation 11
4. Cleaning and maintenance 13
5. Troubleshooting 13
6. Copyright 14
7. Simplified EU Declaration of Conformity 14

SOMMAIRE

EN • The coding in this manual is generic and applies to all code variants of the appliance.

1. Removable battery
2. Speed control button
3. Motor unit
4. Attachment coupling
5. Blending arm
6. Whisk adapter
7. Whisks
8. Chopper bowl (500 ml with lid)
9. Measuring jug (700 ml with lid)
10. Power unlock button
11. Battery charging port

NOTE:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance comes in a packaging designed to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec's Official Technical Support Service immediately.

Box content

Hand blender
Battery
Whisks
Chopper bowl
Measuring jug
Type C charging cable
Instruction manual

- Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

1. Remove all packaging materials, if any.
2. Clean all parts and accessories as indicated in the "Cleaning and maintenance" section.
3. Charge the battery until the battery status indicator light illuminates solid white.

3. OPERATION

Charging the battery

1. Remove the magnetic suction battery from the motor body. Fig. 2
2. Insert the Type C charging cable into the battery charging port. Fig. 3
3. Use a suitable Type C charger for charging.
4. The charge status lights will flash during charging. Once charging is complete, all five lights will remain illuminated.

Battery status

Battery status	Battery %	Meaning
1 white light	Less than 20%
2 white lights	21%-40%
3 white lights	41%-60%
4 white lights	61%-80%
5 white lights	81%-100%
Blue light		High motor temperature
Red light		Battery protection function activated

Using the product

IMPORTANT: Make that the speed control button is not pressed before attaching or removing parts or accessories on the hand blender.

To start blending:

1. Insert the cordless hand blender into the mixture.
2. Press the speed control button and the power unlock button simultaneously to start.
3. Use your free hand to cover the top of the blending jug for greater stability and to prevent splashing.

NOTE: Do not immerse the motor body in liquids or other mixtures.

1. Use an upward motion with the hand blender to move ingredients within the jug.
2. Slowly slide it upwards against the side of the jug.
3. Repeat the process until the ingredients reach the desired consistency.

Note: If the motor becomes too hot, the blue temperature LED indicator will alert you, protecting the appliance and extending its service life.

Using the chopper bowl

Use it to cut and chop beef, onion, garlic, cheese, carrots, nuts, etc.

WARNING: Cutting hazard. Handle the blades with care. Failure to do so may result in cuts.

1. Insert the chopping blade into the chopper bowl. Fig. 4
2. Add the ingredients to the bowl.

Note: For best results, cut food into 3/4" (2 cm) pieces.

1. Align the chopper attachment with the motor body and press them together.
   Note: Do not twist the motor body to fit it. Fig. 5.
2. Press the speed control button and the power unlock button simultaneously to start. Fig. 6.
3. For best results, use the "PULSE" function by pressing and releasing the speed control button until the ingredients reach the desired consistency.
4. When you have finished chopping, release the speed control button.

Using the whisks

Use the whisks to whip cream, beat egg whites, mix instant puddings, vinaigrettes, mousse or to make mayonnaise.

1. Insert the whisks into the whisk/milk frother adapter until they click into place. Fig. 7
2. Then, insert the whisk attachment into the motor body and twist it to lock until you hear a click. Fig. 8
3. Insert the cordless hand blender into the mixture.
4. Press the speed control button and the power unlock button simultaneously to start.
5. Once you have finished whisking, release the speed control button and then remove the blender from the mixture.

NOTE: Do not immerse the motor body in liquids or other mixtures.

TIP: The stainless steel whisks can scratch or mark non-stick coatings. Avoid using the whisks with non-stick cookware.

Using the milk frother

1. Insert the milk frother into the whisk/milk frother adapter until it clicks into place. Fig. 9
2. Insert the milk frother attachment into the motor body and twist it to lock until you hear a click. Fig. 10
3. Insert the cordless hand blender into the mixture. Press the speed control button and the power unlock button simultaneously to start.

NOTE: Do not immerse the motor body in liquids or other mixtures.

4. CLEANING AND MAINTENANCE

IMPORTANT: Make that the speed control button is not pressed before attaching or removing parts or accessories.

WARNING: Cutting hazard. Handle the blades with care. Failure to do so may result in cuts.

1. Remove the blending arm, pot guard or whisk and milk frother attachment before cleaning.
2. The following parts are dishwasher safe (top rack only): Whisks, pot guard, chopper bowl, chopping blade, blending jug and lid.
3. Wash the blending arm, chopper attachment and whisk adapter in hot, soapy water.

4. Clean the motor body with a damp cloth. Mild washing-up liquid may be used, but do not use abrasive cleaners.

5. TROUBLESHOOTING

Problem	Possible cause	Possible solution
The cordless hand blender does not start.	Low battery, incorrectly installed battery or connection issue.	Check the battery level status to see if it is correctly installed. Check if the battery lights illuminate blue and red.
The blue light on the removable battery is illuminated.	Motor temperature too high.	Cool down the main unit until the blue light turns off.
The red light on the removable battery is illuminated.	Battery protection activated (possibly due to overheating or need for reactivation/charging).	1. If the battery surface is overheating, allow it to cool down.2. Connect the charger to activate the battery.

6. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

7. SIMPLIFIED EU DECLARATION OF CONFORMITY

CE Cecotec Innovaciones hereby declares that this product complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This product has been designed, manufactured and tested in compliance with the required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity

1. PIÈCES ET COMPOSANTS

Image 1

information/declaration-of-conformity

www.cecotec.es