HAS 2614 - Hair dryer CLATRONIC - Free user manual and instructions

Brand	CLATRONIC
Model	HAS 2614
Product type	Hair dryer
Power supply	230 V ~ 50 Hz
Temperatures	2 levels (medium and high) + Cool Shot
Cool Shot function	Yes, by button for cold air
Accessories included	Volume nozzle, comb attachment, curling attachment
Curling attachment	With button to release curls
Dust filter	Removable by turning clockwise
Filter maintenance	Clean the air intake opening with a fine brush
Body maintenance	Soft, dry cloth without any product
Warranty	24 months
Certifications	EC directives for interference suppression and low-voltage safety
Safety	Do not use near water; unplug before maintenance
Use	Household only
Repairability	Spare parts available; repair by authorized service
Volume nozzle	To add volume to hair while drying
Comb attachment	Allows combing hair while drying

Frequently Asked Questions - HAS 2614 CLATRONIC

How to use the Cool Shot function?

The Cool Shot function emits cold air by pressing the dedicated button. This helps set the hairstyle and prevent burning hair. You can use it in combination with temperature 1 or 2.

What accessories are included with the hair dryer?

The HAS 2614 comes with a comb attachment for combing while drying, a curling attachment for curling (with a button to release curls) and a volume nozzle to add volume to the hair.

How to clean the dust filter?

To clean the filter, remove it by turning clockwise. Use a fine brush to remove dust from the air intake opening. The hair dryer body can be cleaned with a soft, dry cloth.

Can I use this hair dryer in the bathroom?

No, it is dangerous to use the hair dryer near a bathtub, shower, or sink filled with water. Keep it away from any water source to avoid the risk of electrocution.

How does the curling attachment work?

The curling attachment allows you to curl hair while drying. To release the curls, press the button located above the switch. This releases the hair without damaging it.

What is the warranty on this product?

The warranty is 24 months from the date of purchase. It covers manufacturing and material defects. Keep your receipt as proof of purchase.

What should I do if the appliance stops heating?

First check that the temperature selector is not set to position 0 or Cool Shot. If the problem persists, unplug the appliance and contact an authorized repair service. Do not attempt to repair it yourself.

Is the power cord removable?

No, the cord is fixed. It must only be replaced by the manufacturer, its after-sales service, or a qualified technician if damaged.

Can the hair dryer be used on wet hair?

Yes, that is its intended use. Ensure the appliance is not near water. Towel dry your hair first to reduce drying time.

How to set the temperature?

Use the selector: position 0 for off, position 1 for medium temperature (gentle drying), position 2 for high temperature (fast drying). The Cool Shot button interrupts the heat for a cold air blast.

USER MANUAL HAS 2614 CLATRONIC

General safety instructions

GB

• Before commissioning this device please read the instruction manual carefully.
• Please keep these instructions, the guaranty certificate, the sales receipt and, if possible, the carton with the inner packaging!
• The device is intended exclusively for private and not for commercial use!
• Always remove the plug from the socket whenever the device is not in use, when attaching accessory parts, cleaning the device or whenever a disturbance occurs. Switch off the device beforehand. Pull on the plug, not on the cable.
• In order to protect children from the dangers of electrical appliances, never leave them unsupervised with the device. Consequently, when selecting the location for your device, do so in such a way that children do not have access to the device. Take care to ensure that the cable does not hang down.
• Test the device and the cable regularly for damage. If there is damage of any kind, the device should not be used.
• Do not repair the device yourself, but rather consult an authorised expert.
• For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similar qualified person.
• Keep the device and the cable away from heat, direct sunlight, moisture, sharp edges and suchlike.
• Never use the device unsupervised! Switch off the device whenever you are not using it, even if this is only for a moment.
• Use only original accessories.
• Do not use the device outdoors*.
• Under no circumstances must the device be placed in water or other liquid, or come into contact with such). Do not use the device with wet or moist hands.
• Should the device become moist or wet, remove the mains plug from the socket immediately*). Do not reach into the water.
• Use the device only for the intended purpose.
  *) Please note the following ,Special safety instructions...".

Special safety instructions for this device

• Keep the device away from water and moisture such as, for example, bath tubs, shower areas or even persons taking a bath! Such situations constitute a DANGER TO LIFE through electric shock!
• Attention: The nozzles become hot during operation!

GB

Commissioning

1. Fully unwind the mains cable.
2. Attach a nozzle.

Comb nozzle: you can comb your hair while drying it.

Curler nozzle: dry your hair in a curly condition. Press the button above the operating switch to wind up the curls.

Volumen nozzle: you can dry your hair with extra volume.

1. Insert the plug into a duly installed 230V/50Hz protective contact socket.
2. Setting the Temperature Level:

Position 0: OFF

Position *: COOL-Shot (With this switch it is possible to interrupt the heating process so that the air can be mixed according to individual requirements.)

Position 1: medium temperature for gentle drying and shaping

Position 2: high temperature for rapid drying

Cleaning and care

Clean the air suction opening from time to time with a fine brush. Clean the housing with a soft, dry cloth without additives.

Removing the air suction cover

Remove the cover after turning the cap through approximately 30 degrees in a clockwise direction.

This appliance conforms with the CE directives for radio interference suppression and low-voltage safety and has been built to meet current safety requirements.

Subject to technical changes without prior notice!

Warranty

We undertake to guarantee the appliance sold by our company for 24 months as of the date of purchase (cash receipt).

Within the guarantee period we rectify faults to the machine free of charge which result from material or manufacturing faults, either by repairing the machine or, or our discretion, by replacement. Any such repair or replacement associated with the guarantee shall not cause the guarantee period to be extended, nor be deemed to be the start of a new guarantee period!

Proof for the warranty is provided by the purchase document. The replacement and repair will not be performed free of charge without this proof of purchase.

Should the warranty be valid, please consign the complete appliance in its original packing together with the cash receipt to your local dealer.

Defects to the accessories do not entitle to the change of the appliance. These will be replaced free of charge. In this case do not send back the appliance. Just order the faulty accessory! Broken glass parts are replaced at the expense of the owner!

Neither defects to consumables and wearing parts (e.g. motor pistons, kneading hooks, drive belts, spare remote controls, spare toothbrushes, saw blades, etc.) nor the cleaning, maintenance or change of wearing parts fall under this warranty and hence are subject to payment of costs!

The warranty is terminated in case of handling on the part of Third parties.

After the warranty

Once the warranty has expired, repairs can be carried out by specialized technicians or repair services against the payment of the service.

PL

TapaHTnHoe 68a3aTeNbCTBO

RUS

Bo bpeM rapaHTm Mbl 6ecnlaTHO yctpaHREM BCE HeNoJALKn npNbopa, KOTOpBle BO3HNJI NIO pnpHHe DeEeKTOB MaTePnA nI IIO No BHE 3aBOJaN3rTOBNTeJIy,nyTEM peMOHT nIIN Ha NaIE YCMOTpeHne,3aMeHO npNbopa. TaPapHTnHb peMOHT He ydInnHET cPCK rapaHTnHn H ne Bo3oBHOBJIeE!

DokymentomIraIraHTmClyXHITKaccOByueK.Be3PpeBbAeHnN3tOrO DOKymentaBeCpIaTHbIpeMOHTINI3aMeHaPiN6OpaHeBO3MOxHbl.

B clyae pionomkn npibopa npocim bephyb ero B mara3nB nolnoi KOMPJIeKTAuIN uOpINHahbHOYyNAKOBKe, npIIOXMB KACCObB yek.

DeTaJIcN C DeΦeKTaMn He JIJIbIOTcPnUHNOJ DIA B03BpATA npIbOpa, OHI 6yDIT pIpcJIaHbI BeCIIaTHo B3AmeHn DeΦeKTbIX. B IIObOHM cIyuae He OTCbJIaNTe BeC bI npIbO, a 3aka3BaJaiTe TOJIbKO DeΦeKTbIe De TaJIa! Pa3bNTbIe CTekJIaHHbI DeTaln MeHNIOTcN, KAK npaBIuN, ToJIbKO 3a ONIATy!

Дeфektы ИЗразильбмьх ппнадлжноcte Ил Тушхсдтале (HapnimeK KONTAKTHbIe UIETKIM MOTOPOB, ПИьlbIe NOLOTHA, CMEcINTeBbIe KPOK, ПИвODHbIe peMHи T.D.),аТakkeЧИСТКa,TEXO6ClyxKbAHne Ил 3aMeHуТушхсддталe He noJaIOT nOД rapaTnIO, И NOSTOMy npOBoDЯТСА 3a OTDelHyUOn ONlATy!

TapaHTn TepaETc np BCKpyTN np6Opa NOCTOPOHmN LInaMn.

No OKOHuaHn rapaHTn

ПиИстechенисpoka rapaHTINnpi6Op moXH cdaTbHa peMOHT B CnEuaJIIN3IPOBaHbI MaRa3IN IIN peMOHTHyIO MaTePcKyIO 3a ONIaTy.

Technische Daten

Modell: HAS 2614