FD 2808 - Kitchen appliance CLATRONIC - Free user manual and instructions

Product type	Fondue set
Brand	CLATRONIC
Model	FD 2808
Material of the pot	Stainless steel
Capacity of the pot	0.7 L to 1.5 L
Number of forks	8
Heating type	Separate electric hot plate
Power	Approximately 1500 W (estimated)
Temperature control	Progressive thermostat
Supply voltage	230 V, 50 Hz
Dimensions (L x W x H)	Approximately 30 x 30 x 20 cm (estimated)
Weight	Approximately 2.5 kg (estimated)
Included accessories	8 forks, fork holder, lamp, pot
Care and cleaning	Pot hand washable with dish soap; support clean with damp cloth, do not immerse
Safety	Do not move when hot, do not pour water and oil together, do not immerse the support in water
Warranty	24 months
Intended use	Domestic only, for oil or broth fondue

Frequently Asked Questions - FD 2808 CLATRONIC

How to use the FD 2808 for the first time?

Before first use, clean the pot and accessories with soapy water. Then fill the pot with oil or broth (min. 0.7 L, max. 1.5 L), plug the appliance into 230 V, and set the thermostat to maximum to heat. Check the temperature with a wooden utensil: bubbles should form.

How much oil or broth to put in the pot?

The capacity of the pot is from 0.7 L minimum to 1.5 L maximum. Do not exceed 1.5 L to avoid overflow.

How to adjust the ideal temperature for fondue?

Use the progressive thermostat. For oil, first set to maximum to heat, then lower to maintain a slight simmer. Check with a wooden utensil: small bubbles should form.

How long does it take to cook meat in the fondue?

Cooking takes about 4 to 7 minutes depending on the size of the pieces. The smaller the pieces, the faster they cook.

Can I clean the pot in the dishwasher?

The manual recommends washing the pot by hand with water and dish soap. The heating base should only be cleaned with a damp cloth and should never be immersed.

What to do if the oil overflows?

Never pour water into hot oil as it would cause splashes. Turn off the appliance, unplug it, and let it cool before cleaning.

Is it safe to move the appliance when hot?

No, never move the appliance when hot. Hot liquids could spill. Wait until it cools completely before moving it.

What types of fondue can be prepared with the FD 2808?

The appliance is designed for oil fondue (deep frying) or broth fondue (Chinese fondue). Do not use for cheese or chocolate fondue.

How can I get a manual or spare part?

The manual is available for free download on notice-facile.com. For spare parts, contact CLATRONIC after-sales service or your retailer.

What is the warranty period of the FD 2808?

The warranty is 24 months from the date of purchase, against any material or manufacturing defects. Keep your receipt.

USER MANUAL FD 2808 CLATRONIC

General Safety Instructions

• Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing.
• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately. Do not put it in water.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories.
• Do not operate the machine without supervision. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).
• To protect children from the dangers posed by electrical appliances, make sure that the cable is hanging low and that children do not have access to the appliance.
• Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.
• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
• Use only original spare parts.
  Pay careful attention to the following "Special Safety Instructions".

Special safety information

• Do not move or carry the device when it is hot! Hot liquids may be spilled out!
• Do not pour together water and oil! Hot liquids may be spilled out!
• The device becomes extremely hot! Hold the device only by the relevant handles and knobs!

Scope of Supply and Equipment

Fondue pot made of stainless steel with attachment holder for forks
8 fondue forks
- Separate stable heating base with robust hotplate and continuously adjustable thermostat
Control lamp

Before Initial Use

GB

Before using the wok for the first time, please clean it as described under "Cleaning and Care".

Initial Operation of the Fondue Set

Please select a suitable non-slip base on which to place your wok.

1. Unwind the cable of the hotplate to its full extent
2. Place the fondue equipment on the heating stand.
3. Fill the pot with fat or stock (0.7 litres to 1.5 litres). The most suitable types of oil are frying oils or vegetable oil.
4. Only connect the machine to a properly installed 230V,50Hz safety socket.
5. Switch on the device and set the highest level. Leave the oil to heat. With a wooden stick (e.g. shashlik spit or wooden cooking spoon) you can test whether the correct temperature has been reached. When this is inserted into the oil, small air bubbles should rise up along the wooden stick. Alternatively, you can place a piece of the food to be fried into the hot oil. If bubbles are formed, the frying fat has reached the right temperature.
6. Place the pieces of meat on the fondue forks and then dip them into the oil. Depending on the size of the meat pieces, the cooking process takes between 4 and 7 minutes, i.e. the smaller the pieces of meat or other food are, the faster they are cooked.

ATTENTION: Place the ingredients carefully into the hot oil. Care is required as you are frying in an open vessel and it is not possible to avoid oil splashes. Dry off the ingredients beforehand with a cloth.

1. Adjust the temperature with the regulator such that the oil simmers.
2. If you would like to stop the cooking process, turn the temperature regulator to the minimum setting and remove the mains plug from the socket. Allow the frying oil a considerable time to cool down. Before continuing to use the full frying pot, please ensure that it is no longer at a dangerous temperature.

Cleaning and care

• Before cleaning the machine always remove the mains plug and wait until the machine has cooled down.
• External stains can be removed with a moist cloth without using detergents.
• Clean the wok, cover and accessories in the usual way in water. Only clean the base with a lightly moistened cloth without using detergents. Do not place the base in water.
  Clean the fondue pot with a damp cloth.

GB

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt).

During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!

Proof of the guarantee is provided by the proof of purchase. Without proof of purchase no free replacement or repair will be carried out.

If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt.

• Damage to accessories does not mean automatic free replacement of the whole machine. In such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge.

Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!

The guarantee lapses in case of unauthorized tampering.

After the expiry of the guarantee

After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs.

TapaHTnHoe 68a3aTeNbCTBO

TapaHTmHbCpOK Ha TeppuTOpn PoCCmcko Fedepaun yCTaHaBnBaETcIPOJIHOMOHyBMn PpeDCTaBUTeYMaM.

Kaccobby uek yBJIeTcra rapaHTnHbIM TaIOHOM. Be3 HeOr HeBO3MOXeH 6ecIaTHbI peMOHT nIN 3aMeHa n3dEInr.

B cnyuae BO3NKHOBXHHN PnITeH3NI NO rapaHTM, npeDbYBITE n3dENIE B nIOJIHOKOMJIeKTaUMC, C opINHNAJbHOI YpAKOBKO IN KACCBOIM YeKOM TTOPOBI TOUKe, pOJDAuBSe 3TO N3dENIE.

*) Depektb npnHaIeXHcTeH He cnykat npuHIOH Ia ABTOMATuecko3ameHb Bcero nIeJIIA. B 30m clyae no3BOHHTe HAM, NOxanyIcTa, noRopae nnHn! P436nTbe cTeKJIaHbIe N IOLOMaHbIe NlactMaccOBeI dTaJIIN BO3MeuaIOTc TOJIbKO 3a DOIOJHNTeBHyIOIaIy!

DepeKbI 3HaHbMaEBMbX npHAnJExHcTeN nI TpyuXxCer Detalee (HaPmEep KOHTbIe UeTKn MOTOpOB, CMEiTEbHbIE KIOKi, PnBODHbIE peMHN, 3aNaChbIe NpblbY npabLeHn, 3aNaChbIe 3y6bHe UeTKn, NIIbHbIE NOLOTHa N T.D.), a TAKKE uCTKa, TEXoClyNXbAHne NnI 3aMeHa TpyuXcxCer Detalee! He nonaAdAOT nO rapaHTnIO, n IOToTMy PPOBOaTcR 3a OTJeBHyIO ONlAу!

TapaHTn TepaTeTc npu BCKpItTN N3JeJIIn NOCTOpOHmIM JIuaMn.

Pocje rapaHTn

Iocne OKOHuaHnaCpoka rapaHTmN, peMOHT n3dJIeIN pOns3BOIDNTc 3a OOnaTy, COOTBETCTByUOUMM MaCTepCKMM NII IN yHKTaMn CepBcHOrO o6cJyKbAHnA.

Technische Daten

Modell: FD 2808