DUOSET WITH FIREFLY - Headphones PLANTRONICS - Free user manual and instructions

USER MANUAL DUOSET WITH FIREFLY PLANTRONICS

• Plantronics guarantees the satisfactory condition of the equipment with regard to manufacturing and material defects for 2 years from the date of purchase. (Please retain the original receipt).
• This product should be installed and used in accordance with the instructions detailed in this user guide, and serviced at an approved Plantronics Service Centre. Failure to comply with these conditions may render the warranty void.
  This does not affect your statutory rights.

Plantronics Ltd

Wootton Bassett, UK

Tel: [phone]

[phone]

Plantronics B.V.

Hoofddorp, The Netherlands

Tel: (0)0800 PLANTRONICS

0800 7526876 (NL)

00800 75268766 (BE/LUX)

Plantronics Sarl

Noisy-le-Grand, France

No Indigo: 0825 0825 99

[phone]

Plantronics GmbH

Hürth, Germany

Tel: [phone]

[phone]

Plantronics Acoustics Italia Srl

Milan, Italy

Numero Verde: 800 950934

[phone]

Plantronics Iberia, S.L.

Madrid, Spain

Tel: [phone]

[phone]

Plantronics MEEA Sales Region

London, UK

Tel: [phone]

Nordic Region

Finland 0923306820

Sverige 031289200

Danmark 44350535

Norge 23173770

Plantronics Ltd, Interface Business Park, Bincknoll Lane, Wootton Bassett, Wiltshire SN4 8QQ. ENGLAND

www.plantronics.com

PLANTRONICS

DUOSET™ WITH FIREFLY™ HEADSET

User Guide

Benutzerhinweise

Brugsanvisning

Manual del usuario

Plantronics 2 year Warranty and Repair Service

UK Products under warranty are replaced free of charge.
All units serviced to full production standards using original factory parts. 0800 410014

DuoSet™ with Firefly™ Headset

Thank you for selecting the DuoSet™ with Firefly™ Headset from Plantronics.

The DuoSet™ is a noise-cancelling headset featuring an In Use Indicator designed for use with the Plantronics CA40 DECT Adapter.

This user guide provides instructions on the assembly and usage of your headset.

www.plantronics.co.uk

DIAGRAM KEY

1 Adjustable Headband
2 T- Bar
3 Receiver
4 Ear Cushion
5 Clothing Clip
6 Headset Cable
7 Boom

8 Noise-Cancelling Microphone
9 In Use Indicator
10 Pivot Ball Ring
11 Mounting Socket
12 Earloop
13 Earloop Point
14 Earloop Cable Retainers

The headset boom features an In Use Indicator which, when used in conjunction with the CA40 DECT Adapter, will flash to visually notify your co-workers that you are talking on the telephone using a headset. The boom also features a noise-cancelling microphone.

HEADSET ASSEMBLY: OVER-THE-HEAD

To identify headset components, please refer to the above diagram key (1-14). For assembly instructions, please refer to the diagrams A-F on page 3.

Fig. A Attach the ear cushion to the receiver ensuring that the two notches on the ear cushion align with the boom.
Fig. B Insert the ball joint of the headband into the socket on the back of the receiver.
Fig. C Plug the 2.5mm connector into the headset port of the CA40 DECT Adapter.
Fig. D Place the headband over the top of your head with the ear cushion resting comfortably on your ear. The T-bar should be positioned above your other ear. If necessary the length of the headband can be adjusted. The headset can be worn with the receiver on either ear - simply position the receiver on the appropriate ear and rotate the boom into a suitable position.

Fig. E Position the boom towards your mouth. You are now ready to make or receive calls.
Fig. F The clothing clip helps to keep the headset free from the weight of the headset cable. Attach the clip to your clothing at a comfortable level.

HEADSET ASSEMBLY: OVER-THE-EAR

To identify headset components, please refer to the diagram key (1-14) on page 7. For assembly instructions, please refer to the diagrams G-L on page 4.

Fig. G Attach the pivot ball ring onto the receiver ensuring that the mounting socket for the earloop is parallel with and touching the boom.
Fig. H Depending on which ear the headset is to be worn, insert the earloop point into the mounting socket of the pivot ball ring from either the left or right hand side.
Fig.1 Plug the 2.5mm connector into the headset port of the CA40 DECT Adapter.
Fig. J Slot the headset cable into the earloop cable retainers. Then position the headset as shown and gently press the receiver against your ear. Adjust the conformable earloop around your ear to obtain a comfortable fit.
Fig. K Position the boom towards your mouth. You are now ready to make or receive calls.
Fig. L The clothing clip helps to keep the headset free from the weight of the headset cable. Attach the clip to your clothing at a comfortable level.

Replace the ear cushion every 6 months.

Clean the cable and headset with a moist cloth once a month or when necessary.

PROBLEM

Callers cannot hear me.

Ensure that the boom is correctly positioned towards your mouth.

Check that the headset is correctly plugged into your CA40 DECT Adapter.

PROBLEM

I cannot hear callers.

Ensure that the receiver is correctly positioned against your ear.

Check that the headset is correctly plugged into your CA40 DECT Adapter.

PROBLEM

The headband is uncomfortable.

Adjust the headband by lengthening or shortening the band.

PROBLEM

The earloop is uncomfortable.

Adjust the conformable earloop to suit your ear.

PROBLEM

The headset works but the In Use Indicator does not flash whilst I am making a call.

The In Use Indicator is designed to work exclusively with the CA40 DECT Adapter.

WILLKOMMEN

VEDLIKEHOLDSTIPS FOR OPTIMAL YTElse