420-058 - Ignition Anslut - Free user manual and instructions
Find the device manual for free 420-058 Anslut in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Anslut |
| Model | 420-058 |
| Product Type | Electronic Gas Igniter |
| Power Source | 1 x 1.5 V AA battery (not included) |
| Ignition Voltage | 8 kV (kilovolts) |
| Ignition Mode | Spark generation via push button |
| Compatible Gases | Natural gas, LPG (propane/butane) |
| Dimensions | 120 x 80 x 30 mm |
| Weight | 150 g (including battery) |
| Cable Length | 1 m |
| Housing Material | ABS plastic |
| Key Functions | Reliable spark generation, push-button ignition, safety interlock |
| Maintenance | Clean with a dry cloth; periodically remove carbon deposits from the electrode |
| Safety Features | Water-resistant housing, integrated lock to prevent accidental operation |
| Spare Parts | Replacement battery cover and electrode kit are available |
| Repairability | Battery and electrode can be replaced easily without tools |
| Certifications | CE, RoHS |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| General Information | The Anslut 420-058 is an electronic igniter designed for gas grills, stoves, and fireplaces. |
Frequently Asked Questions - 420-058 Anslut
How do I install the Anslut 420-058 igniter?
Mount the igniter near the gas burner using the provided screws. Position the electrode so that the spark gap is 3-5 mm from the burner surface. Connect the electrode cable to the terminal. Always turn off the gas supply before installation.
What type of battery does the igniter require?
The Anslut 420-058 operates on a single AA battery (1.5 V). The battery compartment is accessible on the bottom of the unit. Replace the battery with a fresh one if the spark becomes weak or absent.
How can I test if the spark generator is working?
Disconnect the electrode cable from the burner, press the ignition button, and listen for a clicking sound and a visible spark across the gap. If no spark appears, check the battery, cable connection, and electrode condition.
How do I clean the electrode?
Clean the electrode and the surrounding area with a soft brush or cloth to remove carbon deposits. Do not use water or chemical cleaners, as they may damage the ceramic insulator. Inspect the electrode for cracks and replace it if damaged.
Can this igniter be used with natural gas?
Yes, the Anslut 420-058 is compatible with natural gas, propane, and butane. The spark voltage is sufficient to ignite these common fuels. Always ensure that the gas valve is open and the area is well-ventilated.
Is the igniter waterproof?
The housing is water-resistant, designed to withstand normal splashes during outdoor use. However, it is not waterproof and should not be submerged. Avoid exposing the igniter to heavy rain or direct water jets.
How do I replace the battery?
Slide the battery cover in the direction of the arrow to open it. Remove the old battery and insert a new AA alkaline battery observing correct polarity (+/-). Close the cover securely until it clicks into place.
What is the ignition voltage of this device?
The unit generates a high-voltage spark of up to 8 kV. This voltage is sufficient to ignite gas mixtures commonly used in grills and stoves. Handle the electrode with care when the unit is active.
What should I do if there is no spark when I press the button?
First, check if the battery is installed correctly and has voltage. If the battery is fine, inspect the electrode cable for breaks or loose connections. Clean the electrode and ensure the spark gap is set to 3-5 mm. If the problem persists, replace the electrode.
Is it safe to use with a gas grill?
Yes, when installed according to the instructions, the igniter is safe for use with gas grills. Always follow general safety rules: turn off the gas when not in use, keep the unit dry, and check for gas leaks before ignition. Do not operate near flammable materials.
User questions about 420-058 Anslut
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual 420-058 - Anslut and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 420-058 by Anslut.
USER MANUAL 420-058 Anslut
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Anslut
Model : 420-058
Category : Ignition