VD-302NP - Security Camera Brickcom - Free user manual and instructions
Find the device manual for free VD-302NP Brickcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Vandal-Proof Dome Camera |
| Brand | Brickcom |
| Model | VD-302NP |
| Image Sensor | 1/2.8-inch CMOS |
| Resolution | 2 Megapixels (1080p HD) |
| Lens | Fixed 3.6mm, F1.8 |
| Night Vision | IR LEDs with up to 20m range |
| Compression | H.264, MJPEG |
| Network Interface | 10/100Base-T Ethernet with PoE (802.3af) |
| Power Supply | PoE (Power over Ethernet) or 12V DC adapter |
| Power Consumption | Max 5W |
| Ingress Protection | IP66 weatherproof rating |
| Impact Resistance | IK10 vandal-proof |
| Storage | MicroSD card slot (local recording) |
| Dimensions (Φ×H) | Approx. 120 mm × 95 mm |
| Weight | Approx. 650 g |
| Operating Temperature | -20°C to 50°C |
| Mounting | Ceiling or wall mount, adjustable 3-axis |
| Security | Password protection, WPA2 encryption support |
| Maintenance | Clean lens with soft dry cloth; keep vents unobstructed |
| Repairability | Designed for easy disassembly; spare parts available via Brickcom |
Frequently Asked Questions - VD-302NP Brickcom
How do I reset the Brickcom VD-302NP camera to factory defaults?
Locate the reset button on the camera (usually near the Ethernet port). Press and hold it for 10 seconds while the camera is powered on. The camera will reboot and restore factory settings.
Can the VD-302NP work without an NVR?
Yes, the camera supports local recording via a microSD card. You can also view the live feed directly through a web browser using the IP address.
What is the maximum resolution of this camera?
The VD-302NP captures 2-megapixel (1080p) video at up to 30 fps, providing sharp and detailed surveillance footage.
How far can the IR night vision see?
The built-in IR LEDs provide a night vision range of up to 20 meters in complete darkness, allowing monitoring even in low-light conditions.
Is the camera outdoor-proof?
Yes, it has an IP66 weatherproof rating, making it resistant to dust and water jets. It is suitable for outdoor installation.
How can I access the camera remotely from my smartphone?
Use the Brickcom Mobile app or a third-party ONVIF-compatible app. Ensure your camera is connected to the internet and configure NAT/port forwarding for remote access.
Does the camera support motion detection?
Yes, the VD-302NP includes motion detection with customizable zones and sensitivity. You can set up email alerts or recordings when motion is detected.
What type of power supply does the camera use?
It supports PoE (Power over Ethernet), which simplifies installation by carrying both data and power through a single cable. Alternatively, an optional 12V DC power adapter can be used.
How do I clean the camera lens without damaging it?
Use a soft, lint-free cloth slightly dampened with water or a camera cleaning solution. Gently wipe the lens in a circular motion. Avoid touching the lens with fingers.
Can I mount the camera on a ceiling?
The camera comes with a bracket that supports ceiling and wall mounting. The 3-axis adjustment allows you to tilt, pan, and rotate the lens for optimal viewing.
User questions about VD-302NP Brickcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual VD-302NP - Brickcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VD-302NP by Brickcom.
USER MANUAL VD-302NP Brickcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brickcom
Model : VD-302NP
Category : Security Camera