VD-500AP-0D - Security Camera Brickcom - Free user manual and instructions
Find the device manual for free VD-500AP-0D Brickcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Brickcom |
| Model | VD-500AP-0D |
| Resolution | 5 Megapixels (2592x1944) |
| Lens | Fixed focal, 2.8 mm |
| Infrared Range | Up to 30 m (98 ft) |
| Day/Night Function | Yes, with IR cut filter |
| Video Compression | H.265 / H.264 |
| Network Interface | RJ45 10/100 Base-T |
| Power Supply | PoE (IEEE 802.3af) or DC 12V |
| Power Consumption | Max 7 W |
| Dimensions (Diameter x Height) | 120 mm x 90 mm |
| Weight | Approx. 500 g |
| Weatherproof Rating | IP66 |
| Operating Temperature | -20 °C to 50 °C (-4 °F to 122 °F) |
| Storage | MicroSD card slot (max 128 GB) |
| Motion Detection | Yes, configurable |
| Maintenance | Clean lens with soft, dry cloth; check cable connections |
| Safety Precautions | Use only approved power adapter; avoid exposure to extreme moisture |
| Spare Parts & Repairability | Contact authorized service center; no user-serviceable parts |
| General Information | Full manual available for download in PDF format |
Frequently Asked Questions - VD-500AP-0D Brickcom
How do I reset the Brickcom VD-500AP-0D to factory defaults?
Press and hold the reset button (located on the camera body) for 10 seconds using a paperclip while the camera is powered on. The camera will reboot with factory settings.
What power supply options are available for this camera?
The camera supports Power over Ethernet (PoE) (IEEE 802.3af) and DC 12V input. Use the included power adapter or a PoE switch.
How can I access the camera remotely?
Connect the camera to your network via Ethernet. Use the Brickcom IP Finder software or a web browser to locate the camera's IP address. Then log in via the web interface or a compatible app.
What is the maximum supported SD card size?
The camera supports MicroSD cards up to 128 GB. For reliable recording, use a Class 10 or higher card.
Does the camera support audio?
Yes, the camera has a built-in microphone and speaker for two-way audio communication when used with compatible software.
How do I set up motion detection?
Log into the camera web interface, go to Event Settings, enable motion detection, and define detection areas and sensitivity. Configure alerts via email or FTP.
What is the default username and password?
Default credentials are admin for both username and password. Change them immediately after first login for security.
Can I mount the camera outdoors?
Yes, the camera has an IP66 weatherproof rating, making it suitable for outdoor use in rain and dust.
How do I update the firmware?
Download the latest firmware from the Brickcom support website. Log into the camera, go to Maintenance > Firmware Upgrade, and upload the file. Do not power off during upgrade.
Where can I find the user manual?
The manual is available for free download on notice-facile.com and Brickcom's official website in PDF format.
User questions about VD-500AP-0D Brickcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual VD-500AP-0D - Brickcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VD-500AP-0D by Brickcom.
USER MANUAL VD-500AP-0D Brickcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brickcom
Model : VD-500AP-0D
Category : Security Camera