VD-502Ae V6 - Security Camera Brickcom - Free user manual and instructions
Find the device manual for free VD-502Ae V6 Brickcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera (Bullet) |
| Brand | Brickcom |
| Model | VD-502Ae V6 |
| Resolution | 2 MP (1920 x 1080) |
| Lens | Fixed, 3.6mm (F2.0) |
| Night Vision | IR LEDs up to 30 meters |
| Power Supply | PoE (802.3af) or DC 12V |
| Power Consumption | Max 5W |
| Dimensions (W x H x D) | 70 mm x 180 mm x 70 mm |
| Weight | 500 g |
| Weatherproof Rating | IP66 |
| Operating Temperature | -20°C to 50°C |
| Main Functions | Motion detection, remote viewing, night vision, two-way audio |
| Storage | NVR, microSD card (up to 128GB) |
| Network Interface | 10/100 Mbps Ethernet (RJ45) |
| Maintenance & Care | Clean lens with soft dry cloth; avoid using solvents; check cable connections periodically |
| Safety Precautions | Install away from direct sunlight and water splashes; use a PoE switch with surge protection |
| Spare Parts & Repairability | No user-serviceable parts; contact Brickcom support for repairs |
| General Information | Outdoor bullet camera for 24/7 surveillance with ONVIF compatibility |
Frequently Asked Questions - VD-502Ae V6 Brickcom
How do I reset the Brickcom VD-502Ae V6 to factory defaults?
Press and hold the reset button (located on the cable or inside a pinhole) for 10 seconds while the camera is powered on. The camera will reboot with factory settings.
What is the maximum SD card capacity supported?
The VD-502Ae V6 supports microSD cards up to 128GB (class 10 or higher recommended).
How can I view the camera remotely?
Connect the camera to your network via PoE. Use the Brickcom app or web browser to access the camera's IP address. Ensure port forwarding is set up on your router for external access.
Is the camera compatible with third-party NVRs?
Yes, the camera supports ONVIF Profile S, making it compatible with many third-party NVRs and software like Blue Iris or Synology Surveillance Station.
What is the night vision range?
The built-in IR LEDs provide clear night vision up to 30 meters (depending on scene conditions).
How do I update the firmware?
Download the latest firmware from the Brickcom website. Access the camera's settings page, go to System > Firmware Upgrade, upload the file, and follow prompts. Do not power off during upgrade.
What power supply options are available?
The camera can be powered via PoE (802.3af) using a PoE switch or injector, or via a DC 12V adapter (not included).
Can I use the camera outdoors?
Yes, the camera has an IP66 weatherproof rating, suitable for outdoor use in rain, snow, or dust.
What is the field of view?
With the standard 3.6mm lens, the camera provides a horizontal field of view of approximately 80°.
How do I access the camera's web interface?
Find the camera's IP address on your router's DHCP list. Enter the IP in a web browser. Default login is admin/admin (change immediately for security).
User questions about VD-502Ae V6 Brickcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual VD-502Ae V6 - Brickcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VD-502Ae V6 by Brickcom.
USER MANUAL VD-502Ae V6 Brickcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brickcom
Model : VD-502Ae V6
Category : Security Camera