VD-202AP - Security Camera Brickcom - Free user manual and instructions
Find the device manual for free VD-202AP Brickcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Brickcom |
| Model | VD-202AP |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Maximum Resolution | 1920 x 1080 (2 MP) |
| Lens Type | Fixed focal, 2.8 mm |
| IR Range | Up to 30 m (98 ft) |
| Day/Night Function | Mechanical IR cut filter |
| Weatherproof Rating | IP66 |
| Power Supply | PoE (802.3af) or 12 V DC |
| Power Consumption | Max 7 W |
| Dimensions (diameter x height) | 110 mm x 90 mm |
| Weight | 0.5 kg (1.1 lb) |
| Video Compression | H.264, MJPEG |
| Network Interface | 10/100 Base-T Ethernet |
| Audio Support | One-way audio |
| Alarm I/O | 1 input, 1 output |
| Storage | MicroSD card slot (up to 128 GB) |
| Operating Temperature | -30°C to 60°C (-22°F to 140°F) |
| Maintenance and Cleaning | Clean the lens with a soft, dry cloth. Avoid using solvents. |
| Security | Use strong passwords and keep firmware updated. Change default credentials. |
| Spare Parts and Repairability | Not user-serviceable. Contact Brickcom support for repairs. |
Frequently Asked Questions - VD-202AP Brickcom
How do I reset the Brickcom VD-202AP to factory defaults?
Press and hold the reset button (located near the cable) for at least 10 seconds while the camera is powered on. The camera will reboot with default settings.
What is the default IP address and credentials?
Default IP is 192.168.1.168. Username: admin; Password: admin. Change these immediately for security.
How do I mount the camera?
Use the included mounting bracket. Drill holes on the mounting surface, insert the anchors, and screw the bracket. Then attach the camera and adjust the angle.
Can I use the camera without a PoE switch?
Yes. You can use a 12V DC power adapter (not included) connected to the DC input. Make sure the voltage is stable.
How do I access the camera remotely?
Configure port forwarding on your router for HTTP (default 80) and RTMP ports. Then access via your public IP or use a DDNS service. Alternatively, use Brickcom's cloud service.
What is the maximum MicroSD card capacity supported?
The camera supports MicroSD cards up to 128 GB. For reliable recording, use a high endurance card.
How do I enable motion detection?
Log into the web interface, go to Event > Motion Detection, enable it, and draw detection areas. Set sensitivity and schedule as needed.
Why is the camera not showing any image at night?
Check if the IR LEDs are active. Ensure the camera is not blocked by obstacles. Also, verify the day/night mode is set to Auto.
Can I record directly to an NVR?
Yes. The camera supports ONVIF Profile S, so it can be added to any compatible NVR. Add it using the camera's IP and credentials.
How do I update the firmware?
Download the latest firmware from Brickcom's website. Log into the camera web interface, go to System > Upgrade, select the file, and click upgrade. Do not power off during update.
User questions about VD-202AP Brickcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual VD-202AP - Brickcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VD-202AP by Brickcom.
USER MANUAL VD-202AP Brickcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brickcom
Model : VD-202AP
Category : Security Camera