CB-101AE - Security Camera Brickcom - Free user manual and instructions
Find the device manual for free CB-101AE Brickcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Model | CB-101AE |
| Brand | Brickcom |
| Resolution | Up to 2 Megapixels (1920x1080) |
| Lens | Fixed focal length, 3.6mm |
| Night Vision | IR LEDs, range up to 20 meters |
| Network | Ethernet 10/100 Mbps, PoE (802.3af) |
| Compression | H.264, MJPEG |
| Dimensions | 150 x 70 x 70 mm |
| Weight | 400 g |
| Power Supply | 12V DC or PoE (IEEE 802.3af) |
| Power Consumption | Max 7W |
| Operating Temperature | -10°C to 50°C |
| Ingress Protection | IP66 (weatherproof) |
| Main Functions | Motion detection, remote viewing, email alerts, recording to NVR/cloud |
| Audio | Built-in microphone and speaker (two-way audio) |
| Care and Cleaning | Clean lens with soft, dry cloth; avoid solvents |
| Safety | Install by qualified personnel; use certified power adapter |
| Spare Parts and Repairability | Contact Brickcom support for replacement parts |
| General Information | Reset button on device; default IP: 192.168.1.168 |
Frequently Asked Questions - CB-101AE Brickcom
How do I reset the Brickcom CB-101AE to factory defaults?
Press and hold the reset button (located on the device) for about 10 seconds until the LED flashes. The camera will reboot and restore factory settings.
What is the default IP address of the CB-101AE?
The default IP address is 192.168.1.168. Ensure your computer is on the same subnet to access the web interface.
How can I connect the camera to my network?
Connect the camera to your router/switch using an Ethernet cable. If using PoE, the camera receives power and network over the same cable. Otherwise, connect the 12V DC power adapter.
Does the CB-101AE support wireless connection?
No, the CB-101AE is a wired camera with Ethernet only. It does not have built-in Wi-Fi.
What mobile app can I use to view the camera remotely?
Brickcom recommends the Brickcom Viewer app (iOS/Android). Alternatively, you can use the camera's web interface via browser.
How do I set up motion detection?
Access the camera's web interface, go to Event > Motion Detection. Enable it, draw detection zones, and set sensitivity. Save settings.
What is the maximum SD card size supported?
The CB-101AE supports microSD cards up to 128 GB. Insert the card into the slot under the cover.
Can I use the camera outdoors?
Yes, the camera has an IP66 rating, making it weather-resistant for outdoor use.
Why is the camera not showing video after PoE connection?
Check that the PoE switch/injector supplies at least 802.3af (15.4W). Verify the Ethernet cable is securely connected and the camera's LEDs are on.
How do I update the firmware?
Download the latest firmware from Brickcom's website. Log into the camera, go to Maintenance > Upgrade, select the file, and click Upgrade. Do not power off during update.
User questions about CB-101AE Brickcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual CB-101AE - Brickcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CB-101AE by Brickcom.
USER MANUAL CB-101AE Brickcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brickcom
Model : CB-101AE
Category : Security Camera