Dryglam Nano Plasma Aluminum - Computer monitor CECOTEC - Free user manual and instructions

Product Type	Hair Straightener
Brand	Cecotec
Model	Dryglam Nano Plasma Aluminum
Technology	Nano Plasma and negative ions
Plate Material	Aluminum
Maximum Temperature	230 °C
Temperature Setting	Yes, from 150 to 230 °C
Heat-up Time	Approximately 30 seconds
Cord Length	1.8 m
Power Supply Voltage	100-240 V, 50/60 Hz
Power	60 W
Dimensions (L x W x H)	28 x 3.5 x 3 cm
Weight	400 g
Auto Shut-off	Yes, after 30 minutes
Swivel Cord	Yes
Warranty	2 years
Maintenance	Clean plates with a soft non-abrasive cloth
Safety	Thermally insulated handle, auto shut-off
Included Accessories	Heat protection pad

Frequently Asked Questions - Dryglam Nano Plasma Aluminum CECOTEC

How to turn the straightener on and off?

To turn on the straightener, press the power button on the handle. Hold it down for 2 seconds to turn it off. An indicator light shows when it is powered on.

What is the ideal temperature for my hair?

The ideal temperature depends on your hair type. For fine hair, use 150-170 °C. For normal hair, 180-200 °C. For thick or curly hair, 210-230 °C. Always start with a low temperature and increase if necessary.

How to clean the plates?

Unplug the device and let it cool. Wipe the plates with a slightly damp soft cloth. Do not use abrasive or metallic products. Dry thoroughly before storing.

What to do if the straightener does not heat up?

Check that the device is plugged in and the cord is not damaged. Make sure the power button is pressed. If the problem persists, contact Cecotec customer service.

Can I use the straightener on wet hair?

No, never use the straightener on wet or damp hair, as this can damage the hair and the device. Dry your hair completely before using the straightener.

How to adjust the temperature?

Use the slider or adjustment buttons on the handle. Turn or press to select the desired temperature. A digital display or indicator light shows the selected temperature.

Does the straightener have an auto shut-off?

Yes, the straightener has an auto shut-off function after 30 minutes of inactivity to prevent any risk. To reactivate, press the power button.

How to store the straightener after use?

Let the device cool completely. Wind the cord around the support without bending it. Store in a dry, dust-free place, preferably with the protection pad.

Where to find replacement plates?

Replacement plates are available from Cecotec customer service or on the official website. Only use compatible plates to ensure safety and performance.

What to do if the cord is damaged?

Do not use the device if the cord is damaged. Contact Cecotec for a replacement. Do not attempt to repair the cord yourself; call a professional.

USER MANUAL Dryglam Nano Plasma Aluminum CECOTEC

Safety instructions 7

1. Parts and components 35

2. Before use 35

3. Operation 36

4. Cleaning and maintenance 36

5. Technical specifications 37

6. Disposal of old electrical

and electronic appliances 37

1. Technical support and warranty 37

2. Copyright 37

3. Simplified EU Declaration of Conformity 38

SOMMAIRE

EU01_101440 DryGlam Nano Plasma Aluminum

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• Ensure that the mains voltage matches the voltage specified on the product rating label and that the plug is earthed.
• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• If the device is to be used in a bathroom, it must be unplugged from the wall socket after use, as the proximity to water could be a risk even with the device switched off.
• As additional protection, it is recommended that a Residual Current Device (RCD) having a rated operating fault current not exceeding 30 mA be installed in the electrical circuit supplying the bathroom. We recommend you ask a qualified installer for advice.
• This appliance can be used by children aged 8 years and above and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by unsupervised children.

- This symbol means that the appliance must not be used near bathtubs, showers, sinks or other containers filled with water.

• WARNING: do not use this appliance near bathtubs,

showers, sinks or other containers filled with water.

• Do not immerse the cable, plug, or any other non-removable part of the appliance in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.
• Check the power cable regularly for visible damage. If the cable is damaged, it must be replaced by Cecotec's official Technical Support Service to avoid any danger.
• Ensure that the air inlets and outlets are not blocked.
• Turn off and unplug the appliance from the power supply immediately after use.
• Unplug the appliance immediately under the following circumstances: abnormal operation, needs cleaning, and/or after use.
• Do not insert metal objects through the air inlets to avoid electric shocks.
• Do not wind the cable around the device.
• Keep your face, neck, and scalp away from the device.
• Do not leave the appliance on any surface while in operation.
• Do not use the appliance to dry wigs, natural hair extensions, fake hair or animal hair.
• The air inlet ensures good ventilation of the appliance. Do not cover or obstruct it, as this may cause overheating.
• Do not insert objects in the air inlet.

INSTRUCTIONS DE SÉCURITÉ

declaration-of-conformity

1. PARTS AND COMPONENTS

Fig. 1

1. Air inlet grille
2. Concentrator nozzle
3. Power switch
4. Main body
5. Air outlet grille
6. lon generator
7. Temperature selection button
8. Speed selection button
9. Power cord
10. Diffuser

NOTE:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place to prevent damage to the appliance if you need to transport it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box content

• Appliance
• Concentrator nozzle
• Diffuser
• Instruction manual

Do not remove the serial number of the appliance in order to keep a correct traceability of it in case of assistance.

3. OPERATION

1. Wash your hair and dry it with a towel to remove excess moisture.
2. Make sure that your hands are completely dry before plugging the hair dryer into the mains.
3. Attach the concentrator nozzle or diffuser accessory, if desired.
4. Once the hair dryer is plugged in, place the power switch in the on position.
5. First, place the power switch in the on position.
6. Each time you press the temperature selection button it will set a different level (1-2-3-2-1). The indicator light of the selected level will light up in the corresponding colour (blue, orange or red).
7. Each time you press the speed selection button it will set a different level (1-2-3-2-1).
8. Blow dry the hair keeping a distance of at least 10 cm between the air outlet and the scalp. Move the hair dryer while drying your hair to avoid excessive heat in one area.
9. When the hair is dry, place the power switch in the off position and unplug the hair dryer from the power socket.

WARNING: If you notice that the appliance switches off or stops blowing hot air, then the overheating protection has been activated. In this case, unplug it from the power supply and allow it to cool down for a few minutes. Before switching it back on, make sure there are no fluffs, hair, or other objects blocking the air inlet grille.

4. CLEANING AND MAINTENANCE

• Disconnect the appliance from the power supply and allow it to cool down before cleaning.
• Use a soft, cotton cloth to clean the appliance inlets and outlets.
• Do not use sharp tools near the inlets and outlets of the appliance to avoid damage.
• Do not immerse the appliance in water or any other liquid and do not expose it to water while cleaning it.
• Do not use abrasive scouring pads, powders, or cleaners.

• You can remove the outer grille protecting the air inlet to clean it with a cotton swab or soft cloth. To do that:

• Turn the outer grille counterclockwise until it unlocks.

• Separate both parts by pulling the grille towards you. Clean the air inlet and the outer grille.
• Follow the reverse procedure to refit the grille.

5. TECHNICAL SPECIFICATIONS

Product reference: EU01_100150 / EU01_101438 / EU01_101439 / EU01_101440

Product: DryGlam Nano Plasma / DryGlam Nano Plasma Champagne / DryGlam Nano Plasma Blue / DryGlam Nano Plasma Aluminum

Power: 1350-1600 W

Voltage: 220-240 V\~

Frequency: 50-60 Hz

Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the appliance and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities. For detailed information on how to properly dispose of electrical and electronic appliances and/or batteries,

consumers should contact their local authorities. Compliance with the above guidelines will help protecting the environment.

7. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions and deadlines established by the applicable regulations. Repairs should be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at [phone].

8. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC

INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

9. SIMPLIFIED EU DECLARATION OF CONFORMITY

Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested to meet the required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity

1. PIÈCES ET COMPOSANTS

Img. 1

Fig./Img./Abb./Afb./Rys/Orb 1

www.cecotec.es