Power Espresso 20 Pro - Coffee maker CECOTEC - Free user manual and instructions

Product type	Espresso coffee maker
Brand	Cecotec
Model	Power Espresso 20 Pro
Dimensions (W × D × H)	30 × 25 × 30 cm
Weight	4.2 kg
Power supply	220-240 V, 50/60 Hz
Power	1350 W
Pump pressure	20 bars
Water tank capacity	1.5 L
Coffee type	Ground coffee or ESE pods
Main functions	Espresso, cappuccino, latte, steam
Steam wand	Rotating, for frothing milk
Filter holder	Stainless steel, pressurized
Automatic shut-off	Yes, after 30 minutes of inactivity
Overheat protection	Yes
Maintenance and cleaning	Descaling recommended every 2 months, removable parts washable
Spare parts available	Water tank, filter holder, seals, steam wand
Repairability	Repairability index of 7.6/10
Warranty	2 years

Frequently Asked Questions - Power Espresso 20 Pro CECOTEC

How to descale my Cecotec Power Espresso 20 Pro?

Use a mixture of water and white vinegar (1:1) or a special espresso machine descaling solution. Fill the tank, run a cycle without coffee, repeat with clear water. Consult the manual for details.

What to do if the machine does not heat up?

Check that the water tank is filled and the machine is turned on. Wait a few minutes. If the problem persists, contact customer service.

How to prepare a perfect espresso?

Use finely ground coffee, tamp well in the filter holder. Select the espresso program. The 20 bar pressure ensures optimal extraction.

How to clean the steam wand?

After each use, purge the steam for a few seconds, then wipe the wand with a damp cloth. For deep cleaning, disassemble the tip and soak it in hot soapy water.

Can I use ESE pods?

Yes, the Power Espresso 20 Pro accepts ESE pods. Use the provided adapter (if included) and place the pod in the filter holder.

What does the flashing red light mean?

The flashing red light indicates a need for descaling. Follow the descaling procedure described in the manual.

How to adjust the water hardness?

Consult the manual to access the adjustment menu. Use a test strip to measure hardness, then adjust the parameter in the machine settings.

The machine makes an abnormal noise, what to do?

Check that the tank is properly in place and there is no blockage in the circuit. If the noise persists, contact technical support.

How to get a creamy cappuccino?

First prepare an espresso, then froth cold milk with the steam wand by tilting the pitcher. Pour the frothed milk over the espresso.

Where to find spare parts?

You can order spare parts from Cecotec's official website or from authorized dealers. Common parts include water tank, filter holder, seals, and steam wand.

USER MANUAL Power Espresso 20 Pro CECOTEC

Cafetera express / Espresso coffee machine

Safety instructions 6

1. Parts and components 37

2. Before use 37

3. Operation 38

4. Cleaning and maintenance 40

5. Troubleshooting 41

6. Technical specifications 42

7. Disposal of old electrical and electronic appliances 42

8. Technical support and warranty 43

9. Copyright 43

SOMMAIRE

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• All safety instructions must be closely followed when using the appliance.

• This appliance can be used by children aged 8 years and above and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by children unless they are over 8 years old and are under supervision. Keep this appliance and its power cable out of reach of children under the age of 8.

• Check the power cable regularly for visible damage. If the power cable is damaged, it must be replaced by the official Cecotec Technical Support Service or similar qualified personnel to avoid risks.

• This symbol means "Caution, Hot Surface". Accessible surfaces are likely to heat up during use.
• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• WARNING: the filling opening must not be opened during operation.
• WARNING: take precautions to avoid spillage of liquids on the cable.
• WARNING: incorrect or improper use can be dangerous for the user and damage the appliance. Use the appliance only for the purposes described in this manual. The surface of the heating element is subject to residual heat after use.
• Ensure that the mains voltage matches the voltage specified on the appliance rating label and that the plug is earthed.
• Do not immerse the cable, plug, or any other non-removable part of the device in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the device.
• Do not twist, bend, pull, or damage the power cable. Protect it from sharp edges and heat sources. Do not allow the cable to touch hot surfaces. Do not let the cable hang over the edge of the working surface or worktop.
• Turn off and unplug the appliance from the mains supply when not in use and before cleaning it. Pull from the plug, not the cable, to disconnect it from the outlet.

• Place the appliance on a dry, stable, flat, heat-resistant surface.

• Do not use the appliance under the following circumstances:

• On or near a gas or electric hob, in heated ovens, or near open flames.
• On soft surfaces (such as carpets) or where it may tip over during use.
• Outdoors or in areas with high humidity levels.
• Do not wash the appliance in dishwashers.
• Maintain a minimum safety distance of 20 cm to the sides and 30 cm on top of the appliance when in operation.
• Do not place the appliance under cabinets or kitchen furniture, as the steam emitted may damage them.
• Do not overfill the filter.
• Do not operate the appliance without water.
• Never use the appliance without a suitable container under the coffee spout or the milk tank spout.
• Supervise children to prevent them from playing with the appliance. Close supervision is necessary when the appliance is being used by or near children.

Note: this appliance has undergone a quality control previous to its commercialisation with the aim of ensuring its correct operation. After the quality control testing, the appliance is cleaned thoroughly, therefore, although it is unlikely to occur, there may still be some water inside.

INSTRUCTIONS DE SÉCURITÉ

1. Water tank cover
2. Water tank
3. Steam knob
4. Control panel
5. Pressure gauge
6. Cup-warming tray
7. Steamer
8. Drip tray
9. Single-cup filter
10. Double-cup filter
11. Portafilter
12. Portafilter handle
13. Steam button
14. Coffee button

15. Power button

16. Measuring spoon with tamper

NOTE:

The graphics in this manual are schematic representations and may not exactly match the device.

2. BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the appliance when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If any of them are missing or not in good condition, please contact the official Cecotec Technical Support Service immediately.

Box content

• Espresso coffee machine
• Instruction manual

ENGLISH

First cleaning

Warning: clean the coffee machine before using it for the first time to remove all possible manufacturing residues.

1. Pour water into the water tank, do not exceed the "MAX" mark, and place the water tank in its correct position.
2. Insert the portafilter and filter (empty) in their position.
3. Place a cup on the cup-warming tray. Make sure the steam knob is turned completely clockwise.
4. Connect the machine to the mains and press the power button. The red indicator light will light up indicating the machine is preheating.
5. Press the coffee button for the pump to start pumping water.
6. To stop this process, press it again.
7. The indicator light will light up when the preheating process is finished.
8. Press the coffee button for the machine to dispense water.
9. Once the machine has finished dispensing water, throw away the remaining water and clean all containers thoroughly.
10. Now, the machine is ready to be used.

Warning: when activating the pump for the first time, the appliance may make some noises which will disappear after 20 seconds. This is because the machine is releasing air and is completely normal, it does not affect the operation.

3. OPERATION

1. Fill the water tank with water, up to the MAX mark. Place the water tank upright so that the tabs are correctly aligned with the slots at the back of the appliance, then push it down until it clicks into place.
2. Remove the portafilter from the packing box. Put one of the filters into the portafilter making sure that the slots on both accessories match. Fig. 2
3. Next, insert the portafilter into the appliance head and turn it until it clicks into position. The portafilter arm must be aligned with the locking position «💡».
4. Plug the machine into a mains socket and press the power button «!». Next, the corresponding indicator light will turn on and the appliance will start preheating automatically.
5. During the preheating process, the coffee button indicator light « 📋 » will flash. Make sure the steam knob is in the OFF position. If it is not, all three indicator lights will start flashing at the same time and the appliance will not start.
6. When the coffee indicator light « 🍼 » remains steady, turn the steam knob to the ON position to dispense hot water and clean the filter or cup.

Preparing espresso coffee

1. While the appliance is preheating, fill the filter with ground coffee (neither too coarse nor too fine) using the measuring spoon, then compress it with the tamper part. Fig. 3
2. Clean any coffee residue from the edge of the portafilter with a brush or by hand.
3. Use one of the filters depending on the amount of coffee you want to prepare. For one coffee, use the single-cup filter, for two coffees, use the double-cup filter.
4. Insert the portafilter into the appliance head and turn it to the locking position «☐».
5. After that, place a cup under the coffee spout. Fig. 4
6. When the coffee button indicator light « 🍼 » remains steady, press the corresponding button to brew coffee. Adjust the position of the cup under the portafilter to ensure that the coffee drips into the cup.
7. If you need to brew more coffee, press the coffee button « 🚗 » again.
8. The brewing process is finished when no more coffee comes out.

Milk frothing function

1. To froth the milk, first press the power button «💡» to switch on the machine and then press the steam button«💡». The corresponding indicator light will start flashing and will not remain steady until the preheating process has been completed.
2. Fill a jug or cup one-third full with cold milk.
3. Then, place the steamer just below the surface of the milk and push it slightly into the milk until it is in contact with the milk (about 1 cm deep).
4. Finally, turn the steam knob slowly until steam starts coming out of the steamer. Fig. 5
   Note: the steam flow can be adjusted according to your preferences. Allow the steamer to emit a little water or steam before frothing the milk.
5. Once the milk has reached a temperature of about 75^ C and a layer of froth starts to form, slowly turn the steam knob to the OFF position and press the steam button « 🔊» to stop the steam output.

Hot water function

1. When the power indicator light «💡» lights up, press the coffee button « 🍼 » and then turn the steam knob to the ON position ON so that hot water comes out of the steamer.
2. Once the desired amount of hot water has been dispensed, turn the steam knob to the OFF position.

Note: if you are using the coffee machine for the first time or have not used it for a long time, it is recommended that you rinse the appliance and dispense hot water before using any other function. This is to ensure that the coffee does not lose its original aroma and flavour.

Cooling function

1. If you wish to prepare coffee after steaming, you must first deactivate the function by pressing the steam button«».

ENGLISH

1. If the coffee button indicator light « 🎨 » flashes, then the appliance temperature is too high, and it needs to cool down.
2. To do so, turn the steam knob to the ON position ON so that the machine starts pumping and dispenses water through the steamer to cool down the machine.
3. When the corresponding indicator light starts flashing quickly, turn the steam knob to the OFF position to stop the cooling process.
4. When the power button indicator light « 🍒 » lights up, you can start brewing coffee.

4. CLEANING AND MAINTENANCE

• Switch off, unplug the appliance from the mains, and allow it to cool down before cleaning or repairing it.
• Use a soft, damp cloth to clean the surface of the appliance.
• Do not use corrosive or abrasive cleaning agents or sponges when cleaning the machine as they may damage the surface.
• Do not immerse the appliance or any of its non-removable parts in water.
• Clean the water tank, drip tray, cup tray, and other removable parts periodically and dry them before re-installing them.

Cleaning mineral deposits

1. Fill the water tank to the MAX mark and descaler according to the proportions indicated by the manufacturer.
2. Place the portafilter without coffee in position.
3. Press the power button and wait for the indicator light to light up indicating that the appliance is hot.
4. Press the coffee button for the machine to dispense 2 cups of water.
5. Then, press the coffee button again to close the pump and wait for 5 seconds.
6. Fully turn the steam knob counterclockwise and place a jug under the steamer.
7. Press the coffee button again for the machine to dispense 2 more cups of water.
8. Then, press the coffee button again to close the pump and wait for 5 seconds.
9. Restart the coffee machine and repeat these steps until there is no more water left in the tank.
10. Once the water tank is empty, prepare a coffee by filling the water tank again with tap water up to the MAX mark, but without coffee. Repeat the previous steps until there is no water left in the tank.
11. This will help to remove any residues that may have been left in the water tank.

5. TROUBLESHOOTING

Problem	Cause	Solution
No water is coming out	1. The water tank is empty, or it has not been installed correctly.2. No water has been pumped into the machine.3. The machine has not been preheated.	1. Fill the water tank, connect the power cable and switch on the appliance.2. Use the hot water function so that the water flows into the pump and can exit through the steamer.3. The coffee machine needs to be preheated in order to prepare coffee. Wait for the coffee button indicator light to stop flashing and remain steady.
The filter lets less fat through	The ground coffee is too coarse or not compact enough.	Change the type of ground coffee and use the measuring spoon to press it well.
No steam	1. The steam outlet is blocked.2. The steam function is not activated, or you have not let the preheating process finish.	1. Insert a pin through the steam outlet.2. Clean the steamer with hot water after frothing the milk.3. Before using the steam function, wait for the preheating process to finish.
Coffee takes a long time to brew or comes out in small quantities	There is too much or too little ground coffee in the filter.	The ground coffee should not be too coarse or too fine, it should be of standard quality and quantity (1 tablespoon of coffee for one cup and 2 tablespoons of coffee for two cups). If the ground coffee is too coarse, it will take longer to extract, and if it is too fine, it will affect the amount of coffee brewed.

ENGLISH

The coffee machine does not froth milk well	1. You have not used whole milk.2. The steam function is activated when the machine is still cold.	1. Use whole milk.2. You can only use the steam function when the corresponding indicator light stops flashing and remains steady.
No coffee comes out and the coffee and steam indicator lights are flashing	The temperature is too high after using the steam function.	Use the cooling function to cool down the machine.
Coffee comes out cold	In the preheating mode, the steam function is not deactivated.	Deactivate the steam function and turn the steam knob to the OFF position.

6. TECHNICAL SPECIFICATIONS

Product reference: 00271

Product: Power Espresso 20 Pro

Voltage: 220 - 240 V\~

Frequency: 50 Hz

Rated power: 1350 W

Technical specifications may change without prior notification to improve product quality.

Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

8. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at [phone].

9. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

FRANÇAIS

1. PIÈCES ET COMPOSANTS

Image 1

Product: Power Espresso 20 Pro

Voltage: 220 - 240 V\~

Frequentie: 50 Hz

Nominaal vermogen: 1350 W

Fig./Img./Abb./Afb./Rys.1

Fig./Img./Abb./Afb./Rys. 2

Fig./Img./Abb./Afb./Rys. 3

Fig./Img./Abb./Afb./Rys. 4

Fig./Img./Abb./Afb./Rys. 5

www.cecotec.es