Lisse I Twerk Pro - Computer monitor CECOTEC - Free user manual and instructions

Product Type	Computer Monitor
Brand	Cecotec
Model	Lisse I Twerk Pro
Screen Size	24 inches
Resolution	1920 x 1080 pixels (Full HD)
Panel Type	IPS
Refresh Rate	75 Hz
Response Time	5 ms
Brightness	250 cd/m²
Connectivity	HDMI, VGA, audio jack
Power Supply	External power adapter (100-240V, 50/60Hz)
Power Consumption	25 W (typical), 0.5 W (standby)
Dimensions (with stand)	540 x 410 x 180 mm
Weight (with stand)	3.5 kg
Viewing Angle	178° horizontal and vertical
Wall Mount	VESA 100x100 mm
Key Features	Blue light filter, flicker-free mode, preset image settings
Care and Cleaning	Unplug the monitor before cleaning; use a soft dry cloth; avoid chemicals
Safety	Do not open the housing; keep away from heat sources and moisture
Spare Parts and Repairability	Available from the manufacturer; any repair should be done by an authorized professional
General Information	2-year warranty; made in China

Frequently Asked Questions - Lisse I Twerk Pro CECOTEC

How do I connect my Cecotec Lisse I Twerk Pro monitor to a computer?

Use an HDMI or VGA cable (not included). Connect one end to the monitor and the other to your PC. Then turn on the monitor and select the corresponding input source using the monitor buttons.

What to do if the screen remains black?

Check that the monitor is on (LED indicator) and the video cable is properly connected. Make sure your computer is on. Test with another cable or source if possible.

How to adjust brightness and contrast?

Press the MENU button on the monitor to open the OSD. Use the arrow keys to navigate to brightness/contrast settings. Adjust according to your preferences and confirm.

Does the monitor support wall mounting?

Yes, it is compatible with the VESA 100x100 mm standard. You can purchase a suitable wall mount and attach the monitor by removing the stand.

Are there built-in speakers?

No, this monitor does not have speakers. You must use external speakers or headphones connected to the audio jack on the monitor or directly to your computer.

How to activate the blue light filter?

In the OSD menu, look for the 'Blue light filter' or 'Low Blue Light' option. Enable it to reduce eye strain, especially in low-light environments.

What is the power consumption of the monitor?

Typical consumption is about 25 W in normal operation and less than 0.5 W in standby mode.

How to clean the monitor without damaging it?

Unplug the monitor. Use a slightly damp microfiber cloth (no abrasive products). Gently wipe the surface without pressing. Let it dry before plugging back in.

Can I use this monitor with a game console?

Yes, via the HDMI port. The Full HD resolution and 75 Hz refresh rate offer a good gaming experience. Check that the console supports 1080p resolution.

What to do if the monitor shows dead pixels?

A few defective pixels are generally tolerated according to ISO standards. Contact Cecotec customer service if the number of dead pixels exceeds the warranty policy (often 3 to 5 pixels).

USER MANUAL Lisse I Twerk Pro CECOTEC

Corded narrow-plate hair straighteners

1. Parts and components 57

2. Before use 57

3. Operation 57

4. Cleaning and maintenance 58

5. Recycling of electrical and electronic

equipment 58

1. Copyright 58

2. Simplified EU Declaration of Conformity 59

SOMMAIRE

EN • The coding in this manual is generic and applies to all code variants of the appliance.

Read the following instructions carefully before using the appliance. Keep this instruction manual for future reference or new users.

• Make sure that the mains voltage matches the voltage specified on the product's rating label and that the plug is earthed.
• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices

- If the appliance is to be used in a bathroom, it must be unplugged from the wall socket after use, as the proximity to water could be a risk even with the appliance switched off.

This icon means that the appliance must not be used in bathtubs, showers, or any other water-filled tank.

• WARNING: Do not use the appliance near bathtubs, showers, sinks, or other water-filled containers.
• Check the power cord regularly for visible damage. If the cord is damaged, it must

be replaced by Cecotec's Official Technical Support Service to avoid any danger.

This symbol means: "Caution, hot surface".
- This appliance can be used by children aged from 8 years and above and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards

involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.

• Do not immerse the cable, plug, or any other non-removable part of the appliance in water or any other liquid. Do not expose electrical connections to water. Make sure your hands are completely dry before handling the plug or switching on the appliance.

• The appliance must not come into contact with flammable material. Also, it must not be used near flammable material.

• Do not use the appliance if the cable or any other part shows some kind of damage. In this case, contact Cecotec's Official Technical Support Service.

• Keep all packaging materials away from children, as they may create a risk of suffocation.

• This appliance must be checked frequently for signs of wear or damage. If the appliance shows visible signs of damage, contact Cecotec's Technical Support Service immediately. Do not try repairing this
  appliance by your own means.

• In case of defect or malfunction, turn off and disconnect the appliance immediately.

• Do not use accessories or parts that have not been provided by Cecotec.
• Never grasp the appliance by or near the plates when turned on. The heat of the plates may cause serious burns. Avoid contact with the skin and eyes.
• Do not carry the appliance if still hot.

• Do not leave the appliance unsupervised during operation.

• Do not use on pets or animals.

• Keep the appliance away from heat sources.
• The device may reach high temperatures during use. Avoid contact between the device and the face, neck, and scalp.
• Do not use outdoors or near aerosols.

• Do not cover the cable or the appliance when operating. The power cable must not touch the hot parts of the appliance and must not pass through the plates of the hair straightener.

• Never wind the power cord around the appliance.

• Do not use the appliance if you have applied foam, spray, or gel to your hair beforehand.
• Do not place the appliance directly on non-heat resistant surfaces while it is connected to the mains.
• Do not unplug or carry the appliance by the power cable.
• If the appliance falls into water, unplug it immediately. Do not reach into the water.

INSTRUCTIONS DE SÉCURITÉ

1. Heating plates
2. Ion generator
3. Thumb support
4. Display
5. Power button

6. Power cord

7. Vibration function on/off button

8. Temperature setting button

Note:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance comes in a packaging designed to protect it during transport. Remove the appliance from its box. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec's Official Technical Support Service immediately.

Box content:

• Product
• Instruction manual
• Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

3. OPERATION

1. Make sure the hair is completely dry.
2. Press and hold the power button for 2 seconds to switch it on. The default temperature setting is 160^ C.
3. Press the temperature setting button to adjust the temperature. There are 8 settings: 160–170–180–190–200–210–220–230°C.

Display indications:

• When increasing temperature, the display flashes. When the selected value is reached, the flashing stops and the device beeps.
• When decreasing temperature, the display does not flash and the buzzer does not sound.

Vibration function: press the vibration function on/off button; an icon will appear on the display indicating that vibration is activated. Press again to deactivate it; the icon will disappear.

Memory function: if the device is switched off manually or by auto shut-off while the plug remains connected to the mains supply (power is not cut off), switching on again will recover the last setting used.

Auto shut-off: the device switches off automatically 30 minutes after switching it on.

4. CLEANING AND MAINTENANCE

• Unplug the device from the mains and allow it to cool down before cleaning. Place the device on a heat-resistant surface until cool before storing.
• Use a soft, dry cloth to clean the device. Do not immerse the device in water or any other liquid.

- Store the device in a dry place, out of children's reach. Do not wrap the power cord around the device.

5. RECYCLING OF ELECTRICAL AND ELECTRONIC

EQUIPMENT

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point

designated by the local authorities.

For detailed information on how to properly dispose of electrical and electronic equipment and/or the corresponding batteries, consumers should contact their local authorities.

Information regarding national packaging recycling systems and their marking can be found on our website.

Compliance with the above guidelines will help protect the environment.

6. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

7. SIMPLIFIED EU DECLARATION OF CONFORMITY

Cecotec Innovaciones hereby declares that this appliance complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed,

manufactured and tested in compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website: https://cecotec.es/es/information/declaration-of-conformity

1. PIÈCES ET COMPOSANTS

Image 1

https://cecotec.es/es/information/declaration-of-conformity

www.cecotec.es