LRP-422CST - Network switch Planet - Free user manual and instructions
Find the device manual for free LRP-422CST Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Planet |
| Model | LRP-422CST |
| Form Factor | Rack-mountable 1U |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 2.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30W (max) |
| Ports | 24 x 10/100/1000 Mbps RJ-45, 4 x SFP+ 10G |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| MAC Address Table Size | 16K |
| VLAN Support | IEEE 802.1Q, up to 4K VLANs |
| QoS | IEEE 802.1p, 8 priority queues |
| Management | Web, SNMP, CLI |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC |
| Cleaning Instructions | Use a soft, dry cloth. Do not use liquid cleaners. |
| Safety Instructions | Operate within specified temperature range. Ensure proper ventilation. |
| Spare Parts / Repairability | Power supply unit and cooling fans are replaceable. |
Frequently Asked Questions - LRP-422CST Planet
What is the default IP address to access the switch web interface?
The default IP address is 192.168.0.100. Use a web browser to log in with username admin and password admin.
How do I reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the LEDs flash. The switch will reboot with factory settings.
Does the LRP-422CST support Power over Ethernet (PoE)?
No, the LRP-422CST is a non-PoE switch. It provides data connectivity only. Use a separate PoE injector if needed.
What VLAN modes are supported?
The switch supports IEEE 802.1Q VLAN tagging, port-based VLAN, and management VLAN. Up to 4094 VLAN groups.
Can I use the SFP+ ports for 1G connections?
Yes, the SFP+ ports are backward compatible with 1G SFP modules. They auto-negotiate speed down to 1 Gbps.
How do I update the firmware?
Download the latest firmware from the Planet support website. Upload the file via the web interface under System > Firmware Upgrade. Do not power off during update.
What should I do if the switch is not powering on?
Check the power cable and ensure the power outlet is working. Verify the power switch is on. If using a redundant power supply, check both units.
Is the switch rack-mountable?
Yes, the switch is designed for standard 19-inch racks. It comes with rack-mount brackets and screws. Allow 1U of vertical space.
How can I configure port mirroring?
Enable port mirroring under Monitoring > Mirroring. Select the source port and destination port. Choose ingress, egress, or both directions.
What is the warranty period for this switch?
Planet offers a limited lifetime warranty for hardware defects. Check the specific region terms. Registration may be required.
User questions about LRP-422CST Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual LRP-422CST - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LRP-422CST by Planet.
USER MANUAL LRP-422CST Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : LRP-422CST
Category : Network switch