NVR-2500 - Video recorder Planet - Free user manual and instructions
Find the device manual for free NVR-2500 Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Model | NVR-2500 |
| Brand | Planet |
| Dimensions (W x D x H) | 300 mm x 250 mm x 50 mm |
| Weight | 2.0 kg |
| Power Supply | 12V DC, 2A external adapter |
| Power Consumption | Max 20W |
| Supported Cameras | Up to 8 IP cameras |
| Video Compression | H.265, H.264 |
| Recording Resolution | Up to 8MP per channel |
| Storage | 1 x SATA HDD (up to 10TB, not included) |
| Network Interface | 1 x Gigabit Ethernet |
| Remote Access | Via mobile app (iOS/Android) and web browser |
| Video Output | 1 x HDMI, 1 x VGA |
| Audio | 1 x Audio In, 1 x Audio Out |
| Alarm I/O | 1 x Alarm In, 1 x Alarm Out |
| USB Ports | 2 x USB 2.0 |
| Operating Temperature | 0°C to 45°C |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Do not expose to water; use surge protector |
| Spare Parts | Power adapter available from authorized dealers |
| Repair | Contact Planet support or certified technician |
| General Information | Network video recorder for IP surveillance systems |
Frequently Asked Questions - NVR-2500 Planet
How do I set up the NVR-2500 for the first time?
Connect the NVR to your router via Ethernet, power on, and use the Planet Discovery Tool to find it on your network. Then log in via web browser using default credentials (admin/12345) and follow the setup wizard.
What kind of hard drive does the NVR-2500 support?
It supports a single 3.5-inch SATA HDD up to 10TB. Use a surveillance-grade drive for reliability.
Can I access the NVR remotely?
Yes, you can use the Planet View mobile app or web browser after enabling remote access and configuring port forwarding on your router.
What is the maximum resolution supported?
Each channel supports up to 8MP (3840x2160) resolution with H.265 compression to save bandwidth and storage.
How many cameras can I connect to the NVR-2500?
It supports up to 8 IP cameras via PoE or directly through your network switch.
Does the NVR support PoE?
No, the NVR-2500 does not have built-in PoE ports. You will need a separate PoE switch to power IP cameras.
How do I perform a factory reset?
Locate the reset button on the rear panel. Press and hold it for 10 seconds while the NVR is powered on. Release when the system reboots.
What should I do if the NVR does not detect cameras?
Ensure cameras and NVR are on the same network. Check that ONVIF is enabled on the cameras. Use the Camera Search function in the NVR menu.
Can I record continuously?
Yes, you can schedule continuous recording, motion-triggered recording, or a combination. Configure in the Recording Schedule menu.
How do I update the firmware?
Download the latest firmware from Planet's website. In the NVR web interface, go to System > Firmware Upgrade and upload the file. Do not power off during update.
User questions about NVR-2500 Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video recorder in PDF format for free! Find your manual NVR-2500 - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NVR-2500 by Planet.
USER MANUAL NVR-2500 Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : NVR-2500
Category : Video recorder