PAR38EL - Lighting Eliminator Lighting - Free user manual and instructions
Find the device manual for free PAR38EL Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Can |
| Light Source | 8 x 3W RGB LEDs (24W total) |
| Beam Angle | 25° |
| Power Consumption | 30W max |
| Input Voltage | AC 100-240V, 50/60Hz |
| DMX Channels | 3/7 selectable |
| Dimensions (W x D x H) | 8.3 x 8.3 x 10.6 in (21 x 21 x 27 cm) |
| Weight | 3.5 lbs (1.6 kg) |
| Housing Material | Aluminum alloy |
| Cooling | Passive convection |
| Control Modes | DMX, Master/Slave, Auto, Sound-Active |
| Features | RGB color mixing, strobe, dimmer, built-in programs |
| Fuse | F 1A, 250V |
| Safety Certifications | CE, RoHS |
| Maintenance | Clean lens with dry cloth; check cables periodically |
| Replacement Parts | LED modules, power supply, fuse |
Frequently Asked Questions - PAR38EL Eliminator Lighting
How do I connect the PAR38EL to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX input of the fixture to the controller's output. Set the DMX address via the DIP switches or digital display on the rear panel.
What is the maximum number of fixtures I can daisy-chain?
You can daisy-chain up to 32 fixtures on a single DMX line without a signal amplifier. For longer runs, use a DMX booster.
How do I change the DMX address?
On the rear panel, use the DIP switches (if available) or the built-in menu to select the desired address. Refer to the manual for binary address settings.
Can the PAR38EL be used outdoors?
No, this fixture is designed for indoor use only. Exposure to moisture or rain may cause electrical shock or damage.
How do I clean the lens?
Disconnect power and allow the fixture to cool. Wipe the lens gently with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
What does the 'Sound-Active' mode do?
In Sound-Active mode, the fixture reacts to ambient music or noise through its built-in microphone. The colors and strobing will change in sync with the beat.
How do I replace a blown fuse?
Disconnect the power cord. Locate the fuse holder next to the power input. Remove the old fuse and replace it with a F 1A 250V fuse of the same type.
Why is the fixture not responding to DMX?
Check that the DMX cable is properly connected and not damaged. Verify that the DMX address is set correctly and not conflicting with other fixtures. Ensure the controller is sending a signal.
Can I use this fixture with a dimmer?
No, the PAR38EL is designed for DMX or standalone operation only. Connecting it to a traditional dimmer may damage the internal electronics.
What is the recommended mounting height?
Typically, mount the fixture 6 to 10 feet above the floor to achieve optimal beam spread. Ensure the mounting bracket is securely attached to a truss or ceiling.
User questions about PAR38EL Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual PAR38EL - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PAR38EL by Eliminator Lighting.
USER MANUAL PAR38EL Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : PAR38EL
Category : Lighting