Stealth Craze - Lighting Eliminator Lighting - Free user manual and instructions
Find the device manual for free Stealth Craze Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Moving Head Light |
| Brand | Eliminator Lighting |
| Model | Stealth Craze |
| Dimensions (L x W x H) | 10.5 x 8.0 x 12.5 inches |
| Weight | 6.5 lbs (2.95 kg) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 60W (typical) |
| Light Source | 60W RGBW COB LED |
| Beam Angle | 15° |
| Strobe Rate | 0-20 Hz |
| Pan Range | 540° |
| Tilt Range | 270° |
| Control Modes | DMX-512, Master/Slave, Sound Active, Auto Run |
| DMX Channels | 4/7/11/14 (selectable) |
| Main Functions | Color mixing, pan/tilt movement, strobe, dimmer, built-in programs |
| Connection | 3-pin XLR in/out, IEC power in/out |
| Cooling | Fan cooled |
| Maintenance | Clean with dry cloth; avoid liquids; check fans regularly |
| Safety | Do not stare into beam; keep away from flammable materials; use safety cable |
| Spare Parts / Repairability | Contact Eliminator Lighting for replacement parts; fuse replacement easy |
| General Information | Indoor use only; operating temperature 30-104°F |
Frequently Asked Questions - Stealth Craze Eliminator Lighting
How do I set the DMX address on the Stealth Craze?
Use the Menu button to navigate to 'DMX Address', then use Up/Down to select the desired address and press Enter to confirm.
Can I use the Stealth Craze without a DMX controller?
Yes, it has Sound Active and Auto Run modes. Press Mode repeatedly until the display shows 'Soun' or 'Auto'.
What does the master/slave mode do?
In Master/Slave mode, one unit sets the pattern and other units follow. Connect all units via XLR, set one as Master (DMX mode with no cable) and others as Slave (DMX mode with cable).
How do I clean the Stealth Craze?
Use a soft dry cloth to wipe the housing and lens. Do not use liquids or solvents. Clean the fans periodically to prevent overheating.
Why is the light not turning on?
Check the power cable and fuse. Ensure the power switch is in the on position. Also verify that the DMX controller is sending signal and the light is not in standby.
How many DMX channels does the Stealth Craze use?
It offers 4, 7, 11, or 14 channel modes. Use the Channel setting in the menu to choose the mode that fits your setup.
Can I mount the Stealth Craze upside down?
Yes, you can mount it in any orientation using the included mounting brackets. Always use a safety cable as an additional support.
What is the maximum number of units I can link in master/slave?
You can link up to 32 units in a daisy chain. Use quality 3-pin XLR cables and terminate the last unit with a DMX terminator if needed.
How do I reset the Stealth Craze to factory settings?
Press and hold the Menu button for 5 seconds until the display shows 'rESt'. Press Enter to confirm.
The fan is making noise, what should I do?
First, check if any debris is blocking the fan. Use compressed air to clean it. If the noise persists, contact Eliminator Lighting for a replacement fan.
User questions about Stealth Craze Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Stealth Craze - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stealth Craze by Eliminator Lighting.
USER MANUAL Stealth Craze Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : Stealth Craze
Category : Lighting