LP 12 HEX - Lighting Eliminator Lighting - Free user manual and instructions
Find the device manual for free LP 12 HEX Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Light |
| Model | LP 12 HEX |
| Brand | Eliminator Lighting |
| Light Source | 12 x 6W HEX (RGBAW+UV) LEDs |
| Beam Angle | 25° (standard), 45° (optional) |
| DMX Channels | 7, 10, or 18 channels |
| Control Modes | DMX, Master/Slave, Standalone, Sound Active |
| Power Consumption | 120W max |
| Power Input | AC 100-240V, 50/60Hz |
| Dimensions (LxWxH) | 10.5 x 8.5 x 11.2 in (267 x 216 x 285 mm) |
| Weight | 7.5 lbs (3.4 kg) |
| Housing Material | Aluminum and plastic |
| Cooling | Passive convection, no fan |
| Operating Temperature | 14°F to 113°F (-10°C to 45°C) |
| IP Rating | IP20 (indoor use only) |
| Warranty | 1 year limited |
| Included Accessories | Power cord, gel frame holder, user manual |
| Safety Certifications | CE, ETL |
Frequently Asked Questions - LP 12 HEX Eliminator Lighting
How do I set the DMX address on the LP 12 HEX?
Press the Menu button until 'DMX Address' appears. Use the Up/Down buttons to set the desired address. Press Enter to confirm.
Can I use this fixture without a DMX controller?
Yes, you can use the built-in standalone modes such as Sound Active or Auto Program. Press Menu to navigate to these modes.
How do I clean the LP 12 HEX?
Use a soft, dry cloth to wipe the housing. For the lens, use a slightly damp cloth with glass cleaner. Avoid harsh chemicals.
What is the maximum number of units in a daisy chain?
You can daisy chain up to 10 units on a single 120V circuit. Ensure total power draw does not exceed the circuit rating.
How do I set up Master/Slave mode?
Set one unit as Master by choosing 'Master/Slave' mode and selecting 'Master'. Set all other units as 'Slave'. Connect them with DMX cables.
The fixture does not respond to DMX, what should I check?
Ensure the DMX cable is properly connected and the address is correct. Try a different DMX controller or cable. Check the termination switch (120 Ohm) if needed.
What is the beam angle and can I change it?
The standard beam angle is 25°. An optional 45° lens is available. Refer to the manual for replacement instructions.
Is the LP 12 HEX suitable for outdoor use?
No, it is rated IP20 only and should be used indoors. Protect from moisture and dust.
How do I update the firmware?
Firmware updates are not user-serviceable. Contact Eliminator Lighting support for assistance.
What type of fuse does the LP 12 HEX use?
It uses a 2A, 250V (5x20mm) glass fuse. Replace only with the same rating.
User questions about LP 12 HEX Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LP 12 HEX - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LP 12 HEX by Eliminator Lighting.
USER MANUAL LP 12 HEX Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : LP 12 HEX
Category : Lighting