EM30 - Lighting Eliminator Lighting - Free user manual and instructions
Find the device manual for free EM30 Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DMX LED Effect Light |
| Brand | Eliminator Lighting |
| Model | EM30 |
| Dimensions (L x W x H) | 12 x 10 x 8 inches |
| Weight | 10.5 lbs |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 60W |
| Light Source | 30 x 3W RGB LEDs |
| DMX Channels | 7 or 13 selectable |
| Control Modes | DMX, Sound Active, Master/Slave, Auto |
| Beam Angle | 30 degrees |
| Housing Material | Aluminum and plastic |
| Cooling System | Passive convection |
| Mounting Options | Floor standing, truss mount |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Cleaning Instructions | Clean lens with soft cloth; ensure unit is off and unplugged |
| Safety Warnings | Avoid exposure to rain or moisture; allow ventilation |
| Spare Parts Available | LED modules, fuses, power cables |
| Repairability | Modular design; replaceable LEDs and PCB |
| Warranty | 1 year limited |
Frequently Asked Questions - EM30 Eliminator Lighting
How many DMX channels does the EM30 have?
The EM30 can operate in 7 or 13 DMX channels, selectable via the control panel.
Can the EM30 be used without a DMX controller?
Yes, it has Sound Active, Master/Slave, and Auto modes for standalone or synchronized operation.
What is the power requirement for the EM30?
It runs on AC 100-240V, 50/60Hz, with a maximum power consumption of 60W.
How do I clean the EM30 fixture?
Disconnect power, use a soft dry cloth to wipe the lens and housing. Avoid solvents.
Can the EM30 be mounted on a truss?
Yes, it has mounting brackets compatible with standard truss systems. Ensure secure fastening.
What is the beam angle of the EM30?
The beam angle is approximately 30 degrees.
Is the EM30 suitable for outdoor use?
No, it is for indoor use only. Protect from rain and moisture.
What type of LEDs does the EM30 use?
It uses 30 x 3W RGB LEDs for a variety of color combinations.
How do I reset the EM30 to factory settings?
Press and hold the Menu button for 5 seconds until the display shows 'FACTORY RESET'. Confirm with Enter.
Where can I find spare parts for the EM30?
Spare parts such as LED modules and fuses are available from authorized Eliminator dealers or online.
User questions about EM30 Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual EM30 - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EM30 by Eliminator Lighting.
USER MANUAL EM30 Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : EM30
Category : Lighting