HD-MB40 - Lighting Eliminator Lighting - Free user manual and instructions
Find the device manual for free HD-MB40 Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head LED Spotlight |
| Model | HD-MB40 |
| Brand | Eliminator Lighting |
| Light Source | 40W High-Power LED |
| Color Temperature | 6500K (cool white) or RGBW |
| Beam Angle | 5° – 45° zoom range |
| Pan Range | 540° |
| Tilt Range | 270° |
| Control Protocol | DMX-512 (6/10/14 channels) |
| Operating Modes | DMX, Auto, Sound-Active, Master/Slave |
| Power Consumption | 60W maximum |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 250 x 200 x 350 mm |
| Weight | 4.5 kg |
| Housing Material | High-impact plastic with metal base |
| Cooling | Temperature-controlled fan |
| Mounting | Omega bracket for truss or floor |
| Safety Features | Safety cable attachment point, automatic thermal shutoff |
| Maintenance | Wipe lens with soft cloth; check cables and fan periodically |
| Spare Parts Availability | Contact Eliminator Lighting authorized dealers |
| Included Accessories | Power cord, DMX cable (1m), mounting bracket, user manual |
Frequently Asked Questions - HD-MB40 Eliminator Lighting
How do I connect the HD-MB40 to a DMX controller?
Use a 3-pin XLR cable to connect the fixture's DMX IN to the controller's DMX OUT. Set the fixture's DMX address using the control panel (press MENU until DMX Address appears, then use UP/DOWN buttons). Refer to the channel assignment table in the manual.
What are the available operating modes?
The HD-MB40 offers four modes: DMX (external control), Auto (built-in programs), Sound-Active (reacts to music via internal microphone), and Master/Slave (synchronize multiple units).
How do I clean the lens and housing?
Disconnect power and allow the fixture to cool. Use a soft lint-free cloth slightly dampened with water or a mild glass cleaner. Never use abrasive cleaners or solvents. Dry thoroughly before reuse.
Why is my HD-MB40 not responding to DMX?
Check the DMX cable connections and ensure the terminator is installed on the last fixture. Verify the DMX address is correct and not conflicting with other fixtures. Also confirm that the controller is set to the correct universe and that the fixture is in DMX mode.
What is the recommended mounting position?
Mount the fixture on a truss or stable stand using the supplied Omega bracket. Ensure the mounting point can support at least 10 times the fixture's weight. Use a safety cable attached to the designated loop. Allow at least 0.5m clearance around the fixture for ventilation.
How do I update the firmware?
Firmware updates are performed via the DMX input using a special programmer (sold separately). Check the Eliminator Lighting website for the latest firmware and instructions. Note: incorrect flashing may damage the unit.
The fixture overheats. What should I do?
Immediately turn off the fixture and disconnect power. Ensure the fan is spinning and that the ventilation slots are not blocked. Clean any dust buildup. If the problem persists, contact Eliminator Lighting support. The fixture has an automatic thermal shutdown for safety.
Can I replace the LED module?
The LED module is not user-serviceable. If the light output dims or fails, contact an authorized service center or Eliminator Lighting for replacement options. Attempting to open the fixture voids the warranty.
What is the maximum number of fixtures I can daisy-chain?
In DMX mode, you can daisy-chain up to 32 units on a single DMX line (with terminator). For power linking, the total current draw should not exceed the input rating (typically 10A). Check the manual for exact power linking capacity.
How do I reset the fixture to factory settings?
Press the MENU button until you see 'WHITE BALANCE' or 'DEFAULT'. Use the UP/DOWN buttons to select 'RESET' and press ENTER. Confirm with 'YES'. The fixture will reboot with default settings. Note: this will clear any custom DMX addresses or settings.
User questions about HD-MB40 Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual HD-MB40 - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HD-MB40 by Eliminator Lighting.
USER MANUAL HD-MB40 Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : HD-MB40
Category : Lighting