Bubble Storm LED - Lighting Eliminator Lighting - Free user manual and instructions
Find the device manual for free Bubble Storm LED Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Bubble Machine |
| Brand | Eliminator Lighting |
| Model | Bubble Storm LED |
| Dimensions (L x W x H) | 12 x 10 x 8 inches |
| Weight | 4.5 lbs |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30W |
| Bubble Output | Up to 10,000 bubbles per minute |
| LED Effects | RGB color changing with strobe and fade modes |
| Control Modes | Remote control, DMX, manual |
| Remote Control Range | Up to 30 feet |
| Fluid Tank Capacity | 1 liter |
| Recommended Fluid | High-quality bubble fluid for machines |
| Mounting Options | Floor stand or hanging bracket |
| Indoor/Outdoor Use | Indoor only |
| Maintenance | Wipe with damp cloth; clean fluid residues regularly |
| Safety Features | Automatic shut-off when fluid level is low |
| Included Accessories | Remote control, power cord, hanging bracket |
| User-Replaceable Parts | Fuse, fluid tank |
| Warranty | 1 year limited |
| Application | Stage shows, parties, nightclubs |
Frequently Asked Questions - Bubble Storm LED Eliminator Lighting
How do I fill the bubble fluid?
Open the fluid tank cap and pour bubble fluid into the tank until it reaches the maximum fill line. Do not overfill. Use only high-quality bubble fluid designed for bubble machines.
Can I use this machine outdoors?
The Bubble Storm LED is designed for indoor use only. Exposure to wind, rain, or extreme temperatures may damage the unit and reduce bubble output.
How do I clean the bubble machine?
After each use, empty any remaining fluid, rinse the tank with warm water, and dry it thoroughly. Wipe the exterior with a soft, damp cloth. Do not use harsh chemicals.
The LED lights are not working. What should I do?
Check that the unit is powered on and the LED mode is activated via remote or control panel. If still off, try resetting the unit by unplugging for 10 seconds. If the issue persists, the LED circuit may need service.
How do I replace the fuse?
Locate the fuse holder near the power cord. Use a screwdriver to open the fuse cap, remove the old fuse, and replace it with a new one of the same rating (e.g., 2A 250V). Always unplug the unit first.
What remote control functions are available?
The remote control allows you to turn the machine on/off, adjust LED colors and patterns (auto, strobe, fade), and activate bubble output. Range is approximately 30 feet.
Why is the bubble output low or no bubbles?
Check fluid level; refill if low. Ensure the fan is clear and the air intake is not blocked. Clean the bubble ring and fan area from dried fluid. Use recommended fluid for best results.
Can I use homemade bubble solution?
It is not recommended. Homemade solutions may contain contaminants that can clog the unit and reduce performance. Use only commercial bubble fluids specifically made for machines.
Does this machine have DMX control?
Yes, the Bubble Storm LED features DMX connectivity via 3-pin XLR. Assign a DMX address to control bubble and LED functions independently.
How long can I run the machine continuously?
The machine can run continuously for up to 30 minutes at a time. Allow the unit to cool for 10 minutes between cycles to prevent overheating.
User questions about Bubble Storm LED Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Bubble Storm LED - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bubble Storm LED by Eliminator Lighting.
USER MANUAL Bubble Storm LED Eliminator Lighting
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eliminator Lighting
Model : Bubble Storm LED
Category : Lighting