ReadyWarm 2000 Max Ceramic Rotate Smart - Fan heater CECOTEC - Free user manual and instructions
Find the device manual for free ReadyWarm 2000 Max Ceramic Rotate Smart CECOTEC in PDF.
| Product Type | Ceramic Fan Heater |
| Brand | Cecotec |
| Model | ReadyWarm 2000 Max Ceramic Rotate Smart |
| Maximum Power | 2000 W |
| Heating Technology | PTC Ceramic |
| Rotation | Yes, wide oscillation |
| Power Supply | 220-240 V ~ 50 Hz |
| Dimensions (L x D x H) | 20 x 18 x 30 cm |
| Weight | 1.5 kg |
| Operating Modes | Hot (high/low), ventilation only |
| Adjustable Thermostat | Yes, temperature control |
| Tip-over Protection | Yes, automatic shut-off |
| Overheat Protection | Yes |
| Noise Level | ~45 dB (estimated) |
| Material | Heat-resistant Plastic |
| Color | White and black (typical) |
| Cable Length | 1.5 m |
| Maintenance and Cleaning | Unplug, clean the air inlet grille with a dry cloth |
| Spare Parts Available | Contact Cecotec customer service |
| Warranty | 2 years (standard) |
Frequently Asked Questions - ReadyWarm 2000 Max Ceramic Rotate Smart CECOTEC
User questions about ReadyWarm 2000 Max Ceramic Rotate Smart CECOTEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Fan heater in PDF format for free! Find your manual ReadyWarm 2000 Max Ceramic Rotate Smart - CECOTEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ReadyWarm 2000 Max Ceramic Rotate Smart by CECOTEC.
USER MANUAL ReadyWarm 2000 Max Ceramic Rotate Smart CECOTEC
natural_image
Exterior view of a modern electric heating tower with a digital display and grid-patterned front panel (no visible text or symbols)ES: Este producto no es adecuado para calefacción primaria. Este producto está indicado únicamente en lugares abrigados o para una utilización puntual. EN: This product is not suitable for primary heating purposes. This product is only suitable for well insulated spaces or occasional use. FR: Če produit ne convient pas pour une utilisation en tant que chauffage primaire. Cet appareil a été conçu seulement pour être utilisé dans des espaces intérieurs ou pour une utilisation momentanée.DE: Dieses Produkt ist nicht für als Hauptheizgerät geeignet. Dieses Produkt ist nur für geschützten Orten oder zur gelegentlichen Verwendung geeignet.IT: Questo apparecchio non è adatto all'uso come fonte primaria di riscaldamento. Il suo utilizzo è indicato solo in luoghi riparati o per uso occasionale. PT: Este aparelho não é adequado para ser usado como aquecimento primário. Destina-se a uma utilização ocasional e apenas em locais abrigados. NL : Dit product is niet geschikt voor primaire verwarming. Dit product is alleen geschikt voor gebruik op beschutte plaatsen of voor incidenteel.gebruik.PL: Ten produkt nie nadaje się do pierwotnego ogrzewania. Ten produkt jest wskazany tylko do miejsc ostoniętych lub do okazjonalnego użytku. CZ: Tento výrobek není vhodný pro primární topení. Tento výrobek je vhodný pouze pro použiti v krytých oblastech nebo pro příležitostné použití.
Manual de instrucciones Instruction manual
Safety instructions 7
-
Parts and components 36
-
Before use 36
-
Operation 37
-
Cleaning and maintenance 37
-
Troubleshooting 38
-
Technical specifications 38
-
Disposal of old electrical and electronic appliances 40
-
Technical support and warranty 40
-
Copyright 41
SOMMAIRE
Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.
- Make sure the voltage of your mains supply matches the voltage requirements specified in the rating label of the appliance.
- This device is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
- If the power cable is damaged, it must be replaced by the Technical Support Service of Cecotec or similar qualified personnel to avoid risks.

This symbol means "do not cover".
- WARNING: to avoid overheating, do not cover the appliance.
- The heating appliance must not be placed immediately below a socket outlet.
- Do not use the heating appliance in the immediate vicinity of a bath, shower, or swimming pool.
- Do not use this heating appliance if it has been dropped.
- Do not use if there are visible signs of damage to the heating appliance.
- Use this heating appliance on a horizontal and stable surface, or fix it to the wall, as applicable.
- Keep the device out of the reach of children under 3 years old, unless constantly supervised.
- Children between 3 and 8 years old should only switch the appliance on or off when it has been placed in its normal, intended operating position and if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children
between 3 and 8 years old should not plug in, adjust, and clean the appliance and should not carry out maintenance tasks.
- WARNING: some of the product's parts may become very hot and cause burns. Particular attention should be paid when children and/or vulnerable people are present.
- WARNING: do not use this heating device in small rooms that are occupied by people who cannot leave the room by themselves, unless permanent supervision is provided.
- WARNING: to reduce the risk of fire, keep textiles, curtains, or other flammable material at least 1 m away from the air outlet.
- Do not insert or allow objects to enter through the ventilation slots, as this may result in electric shock, fire, or damage to the appliance.
- Do not immerse the cable, plug, or any other non-removable part of the appliance in water or any other liquid. Do not expose the electrical connections to water. Always make sure that your hands are dry before operating or adjusting any switches on the product or touching the plug and socket.
- Never leave the device unattended during use.
- One of the most common causes of overheating is the building up of debris or fluff in the appliance. Be sure to clean these accumulations periodically by vacuuming the vents and grilles.
- Do not place the appliance on carpets, and do not place the cable under carpets. Position the cord in such a way as to avoid obstructing passage and cause tripping hazards.
- Do not store it until it cools down. Store it in a cool, dry place when not in use.
- When using, maintain a minimum distance of 50 cm between the window and the wall.
INSTRUCTIONS DE SÉCURITÉ
- On/Off
- Heating mode selection
- ECO mode activation
- Temperature setting
- Oscillation mode activation
- Timer selection
Fig. 3
- On/Off
- Timer selection
- Temperature increase
- Heating mode selection
- Oscillation mode activation
- Temperature decrease
NOTE:
the graphics in this manual are schematic representations and may not exactly match the device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.
Box content
- Heater
- Instruction manual
- Remote control
3. OPERATION
- Once plugged in, switch on the appliance by pressing the switch, position "I". To switch it off, put it in the "0" position.
- Press the power icon once to start the fan in low mode. Press the icon again to switch the fan off.
- Standby: If no icon is pressed during 10 minutes of operation, the display will turn off. Press any icon to turn the display back on.
- Press the heating mode selection icon to toggle between Low and High mode.
- Press the oscillation mode activation icon to make the fan rotate from side to side during operation. Press the icon again to stop oscillation.
- Press the timer icon to keep the fan on for the selected time. "0" indicates that the timer will not be activated.
-
Press the temperature setting icon to set a target temperature within the range 15 - 45°C.
-
If the set temperature is equal to or lower than the room temperature, the appliance will stop heating.
- If the set temperature is 1-2°C higher than the room temperature, the appliance will operate in Low mode.
- If the set temperature is +3°C higher than the room temperature, the appliance will operate in High mode.
- Press ECO and a default temperature of 22^ C will be set.
- When the difference between the room temperature and the set temperature is more than 4^ C, the appliance will operate in High mode.
- When the difference between the room temperature and the set temperature is more than 4^ C, the appliance will operate in Low mode.
- When the room temperature is higher than the set temperature, the appliance will stop heating.
4. CLEANING AND MAINTENANCE
- Before cleaning the heater, make sure that it is unplugged.
- Use a damp cloth with a little neutral detergent to clean the device. Do not use other solvents.
- The heater must be used or stored after it has completely cooled down and dried out.
ENGLISH
- If you stop using the heater, unplug it from the socket and store it in a dry place.
- To change the battery follow the steps shown in figure 4.
5. TROUBLESHOOTING
Do not repair or disassemble the device yourself, unauthorised repair attempts will void the warranty and may cause personal injury.
| Problem | Possible cause | Solution |
| There is no power supply | 4. The power cord is not connected.5. No power comes out of the socket6. The power switch on the back of the heater is in the off position. | 4. Install the power cord.5. Check that the socket is turned on.6. Make sure the power switch on the back of the heater is in the on position. |
| Smell The appliance produces an unusual odour | 2. The appliance is new. When using the appliance for the first time, the motor fan may emit a slight odour. The smell will disappear within the first week of use. | No action required. |
If the problem persists after trying the above solutions, please contact Cecotec's official Technical Support Service.
6. TECHNICAL SPECIFICATIONS
Product reference: 08276
Product: ReadyWarm 2000 Max Ceramic Rotate Smart
Power: 2000 W
Voltage: 220 - 240 V
Frequency: 50 - 60 Hz
| Name of the model: 08276_ReadyWarm 2000 Max Ceramic Rotate Smart | |||||
| Product | Symbol | Value | Unit | Product | Unit |
| Heating power | Type of heat input, for electrical storage.Local heaters only (select one) | ||||
| Rated heat output | P_nom | 2.0 | kW | manual control of the heating load, with integrated thermostat | [NO] |
| Minimum heat output(illustrative) | P_min | 0.8 | kW | manual control of the heat load with feedback of ambient and/or outdoor temperature | [NO] |
| Heating power maximum constant | P_max,c | 2.0 | kW | electronic heat load control with feedback of ambient and/or outdoor temperature | [NO] |
| Auxiliary energy consumption | Fan assisted heat output | [NO] | |||
| At rated heat output | el_max | 0.000 | kW | Type of heat output/ambient temperature control (select one) | |
| At minimum heat output | el_min | 0.000 | kW | single-stage heat output and no ambient temperature control | [NO] |
| In standby mode | el_SB | 0.000 | kW | Two or more manual stages, no room temperature control | [NO] |
| with mechanical thermostat for room temperature control | [YES] | ||||
| with electronic room temperature control | [NO] | ||||
| electronic room temperature control and daily timer | [NO] | ||||
| electronic room temperature control and weekly timer | [NO] | ||||
| Other control options (multiple selection possible) | |||||
| ambient temperature control, with presence detection | [NO] | ||||
| room temperature monitoring, with open window detection | [NO] | ||||
| with distance control option | [NO] | ||||
| with adaptive start-up control | [NO] | ||||
| with working time limitation | [YES] | ||||
| Contact information: | Cecotec innovaciones SL., Av. Reyes Católicos, 60, 46910, Alfafar, Valencia (Spain) | [NO] | |||
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
8. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.
9. COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.
FRANÇAIS
1. PIÈCES ET COMPOSANTS
Img. 1
5. PROBLEEMOPLOSSING
Product: ReadyWarm 2000 Max Ceramic Rotate Smart
Vermogen: 2000 W
Voltage: 220 - 240 V
natural_image
Pure technical diagram of a vertical rectangular structure with base and top, no text or symbols presentflowchart
graph LR
A["Top Section"] --> B["Side Section"]
B --> C["Bottom Section"]
C --> D["Top Section with Component 1"]
C --> E["Bottom Section with Component 2"]
Fig./Img./Abb./Rys./Obr. 4
www.cecotec.es