KYOCERA FS-C5250DN - Color laser printer

FS-C5250DN - Color laser printer KYOCERA - Free user manual and instructions

Find the device manual for free FS-C5250DN KYOCERA in PDF.

📄 207 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice KYOCERA FS-C5250DN - page 10
View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Professional color laser printer
Printing technology 4-color electrophotography (CMYK), tandem system
Print speed (A4) Up to 26 ppm (tray), 19 ppm (MP tray)
Duplex speed (A4) Up to 13 ppm
Resolution 600 dpi
First print time Black: 9 s max, Color: 10.5 s max
Warm-up time Power-on: 29 s max, Standby: 20 s max
Processor PowerPC 464-667 MHz
Memory Standard 256 MB, max 1280 MB (DIMM)
Internal storage Optional hard disk (FS-C5250DN only)
Interfaces USB 2.0 Hi-Speed, Ethernet 10/100 BASE-TX, KUIO-LV slot (option)
Supported operating systems Windows 2000/XP/Vista/7, Server 2003/2008, Mac OS X
Paper capacity (standard tray) 500 sheets (80 g/m²)
Multipurpose tray capacity 50 sheets (80 g/m²)
Optional trays PF-520 (500 sheets), PF-530 (500 sheets, special media)
Output tray capacity 250 sheets (80 g/m²)
Paper sizes (tray) A4, B5, A5, Legal, Letter, Folio, Executive, etc.
Paper sizes (MP tray) A4, B5, A5, Legal, Letter, envelopes, postcards, etc.
Paper weight Tray: 60-163 g/m², MP tray: 60-220 g/m²
Duplex printing Built-in automatic
Economy functions EcoPrint mode, auto sleep
Security IPSec, SSL/TLS, IPP over SSL, administrator authentication, panel lock
Power consumption (max) 1111 W (120 V) / 1169 W (220-240 V)
Noise (printing) 61.7 dB(A)
Dimensions (W × D × H) 390 × 523 × 397 mm
Weight Approx. 31.5 kg
Recommended monthly volume 1,500 pages (average), max 65,000 pages
Maintenance Toner cartridge replacement (CMY+K), toner waste container, transfer unit cleaning
Included software KX drivers, Command Center (web management), Status Monitor

Frequently Asked Questions - FS-C5250DN KYOCERA

How to replace a toner cartridge?
Open the top cover. Remove the old cartridge by pulling it toward you. Unpack the new cartridge, insert it into the corresponding slot (Black, Cyan, Magenta, Yellow). Close the cover. The printer initializes. Use KYOCERA cartridges to avoid damage.
What to do in case of a paper jam?
Open the front cover, rear cover (exit cover) or the tray depending on the location indicated on the display. Gently remove the jammed paper by pulling in the feed direction. Close all covers. The printer resumes automatically. Refer to the Troubleshooting chapter of the manual.
How to connect the printer to the network?
Plug an Ethernet cable between the printer and your network. Turn on the printer. Go to the Network menu via the control panel to configure TCP/IP (IP address, DHCP, etc.). You can also use Command Center via a web browser after assigning an IP address.
Why are my prints of poor quality?
Check the toner level via the panel (Counter menu). Run a color calibration from Adjust/Maintenance. If streaks appear, clean the paper transfer unit (see Maintenance chapter). Use appropriate paper and check print settings (EcoPrint mode, resolution).
How to install the print driver?
Insert the provided CD-ROM. Launch Setup.exe. Choose 'Express mode' for automatic detection or 'Custom mode' to manually configure the port. Follow the instructions. The KX driver is recommended for all features. Restart the computer if prompted.
Can I print directly from a USB flash drive?
Yes. Plug the USB flash drive into the front port of the printer. On the panel, go to USB Memory. Select the file (PDF, TIFF, JPEG, XPS) and choose the number of copies. Press OK to print. Long file names (>12 characters) may be truncated on the display.
How to perform duplex printing?
Ensure the printer is in duplex mode (menu Print Settings > Duplex Mode). In the print driver, select the 'Duplex printing' option. Use standard paper (60-163 g/m²) for optimal operation.
What does the message 'Please Wait' mean?
This message appears during warm-up, automatic color calibration, cooling, or when loading special paper (coated). Wait a few minutes. If the message persists, check for any error (Attention indicator lit) and consult the Troubleshooting section.
How to increase the printer memory?
The printer has a slot for a DIMM memory module (optional, max 1280 MB). Turn off the printer, remove the rear cover, insert the module into the connector. Refer to the Memory expansion modules section of the appendix for compatible types.
Where can I find the full user manual?
The full manual is available on notice-facile.com as a free PDF download. It contains 207 pages with detailed instructions, diagrams, and troubleshooting procedures. You can also ask questions on the product page.

User questions about FS-C5250DN KYOCERA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Color laser printer in PDF format for free! Find your manual FS-C5250DN - KYOCERA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FS-C5250DN by KYOCERA.

USER MANUAL FS-C5250DN KYOCERA

FS-C5150DN/FS-C5250DN

KYOCERA FS-C5250DN - 1

Introduction

Nosus you remercions d'avoirCHOISIR la machine FS-C5150DN/FS-C5250DN.

Typeface Trademark Acknowledgement

All resident fonts in this printer are licensed from Monotype Imaging Inc. Helvetica, Palatino and Times are registered trademarks of Linotype-Hell AG. ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation.

Monotype Imaging License Agreement

1 "Software" shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols ("Typefaces") solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
8 THE PARTIES AGREE THAT ALL OTHER WARRANTYES, EXPRESSED OR IMPLIED, INCLUDING WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE EXCLUDING.

9 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
10 IN NO EVENT WILL MONOTYPE IMAGING BE LIABLE FOR LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY ABUSE OR MISAPPLICATION OF THE SOFTWARE AND TYPEFACES.
11 Massachusetts U.S.A. law governs this Agreement.
12 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.
13 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
14 YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE TO ACCEPT THE TERMS AND CONDITIONS OF THIS AGREEMENT.

GPL

Copyright © 1998-2006 OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3 All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssll.org/)
4 The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission.

For written permission, please contact openssI-core@openssI.org.

5 Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.

6 Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http:// www.openssl.org/)

THIS SOFTWARE IS PROVIDED BY THE OpensSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTYES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTYES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpensSL PROJECT OR ITS CONTRIButors BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCEDURE OF SUBSTITUTE GOODSOR SERVICES;LOSSOFUSE,DATA,OR PROFITS;OR BUSINESSINTERRUPTION)HOWEVERCAUSEDAND ON ANY THEORY OF LIABILITY,WHETHERINCONTRACT,STRICT LIABILITY,OR TORT (INCLUDING NEGLIGENCEOR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are ahead to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1 Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3 All advertising materials mentioning features or use of this software must display the following acknowledgement:

"This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"

The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related :-).

4 If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:

"This product includes software written by Tim Hudson (tjh@cryptsoft.com)"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTYES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTYES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR COLLABORORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCEDURE OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUsION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ASING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Compliance and Conformity

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
  • The use of a non-shielded interface cable with the referenced device is prohibited.

CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.

Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

  • The above warning is valid only in the United States of America.

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured after August 1, 1976. Compliance is mandatory for products marketed in the United States. A label indicating compliance with the CDRH regulations must be attached to laser products marketed in the United States.

Canadian Department of Communications Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Programme Energy Star (ENERGY STAR®)

Papier, specifications

Imprimer Structure Menus

增增增增增增增增增增增增增增增增增增增增增增增增

增增增增增增增增增增增增增增增增增增增增增增增

#

  • PCL6
    KPDL (AUTO)
    KPDL

8 Information Page

PCL 6
KPDL
KPDL (AUTO)

KYOCERA FS-C5250DN - Information Page - 1

Orientation Portrait

Orientation Paysage

KYOCERA FS-C5250DN - Information Page - 2

KYOCERA FS-C5250DN - Information Page - 3

MM/JJ/AAAA  
JJ/MM/AAAA  
AAAA/MM/JJ 

AppleTalk (Paramètres AppleTalk)

Ajuster/Maintenance >

Color Registration Correction Chart

KYOCERA FS-C5250DN - AppleTalk (Paramètres AppleTalk) - 1

KYOCERA FS-C5250DN - AppleTalk (Paramètres AppleTalk) - 2

KYOCERA FS-C5250DN - AppleTalk (Paramètres AppleTalk) - 3

KYOCERA FS-C5250DN - AppleTalk (Paramètres AppleTalk) - 4

KYOCERA FS-C5250DN - AppleTalk (Paramètres AppleTalk) - 5

KYOCERA FS-C5250DN - AppleTalk (Paramètres AppleTalk) - 6

KYOCERA FS-C5250DN - AppleTalk (Paramètres AppleTalk) - 7

KYOCERA FS-C5250DN - AppleTalk (Paramètres AppleTalk) - 8

KYOCERA FS-C5250DN - AppleTalk (Paramètres AppleTalk) - 9

KYOCERA FS-C5250DN - AppleTalk (Paramètres AppleTalk) - 10

DHCP (Dynamic Host Configuration Protocol)

NetBEUI (NetBIOS Extended User Interface)

Mémoire Installation .A-6

Structure Menus 4-12

This machine has passed all quality controls and final inspection.

PASSIONATE PEOPLE. FROM ALL OVER THE WORLD.

KYOCERA FS-C5250DN - PASSIONATE PEOPLE. FROM ALL OVER THE WORLD. - 1

KYOCERA MITA EUROPE B.V.

KYOCERA FS-C5250DN - KYOCERA MITA EUROPE B.V. - 1

EUROPEAN HEADQUARTERS

Bloemlaan 4

2132 NP Hoofddorp

The Netherlands

Phone: +31 20 654 0000

Fax: +31 20 653 1256

www.kyoceramita-europe.com

KYOCERA FS-C5250DN - KYOCERA MITA EUROPE B.V. - 2

KYOCERA MITA Europe B.V., Amsterdam (NL)

(Europe, Middle East & North Africa)

Bloemlaan 4

2132 NP Hoofddorp

The Netherlands

Phone: +31 20 654 0000

Fax: +31 20 653 1256

www.kyoceramita-europe.com

KYOCERA FS-C5250DN - KYOCERA MITA EUROPE B.V. - 3

AUSTRIA

KYOCERA MITA AUSTRIA GmbH

Eduard Kittenberger Gasse 95

A-1230 Wien

Phone: +43 186 338 0

Fax: +43 1 86 338 400

www.kyoceramita.at

KYOCERA FS-C5250DN - KYOCERA MITA EUROPE B.V. - 4

BELGIUM

S.A. KYOCERA MITA Belgium N.V.

Sint-Martinusweg 199-201

BE-1930 Zaventem

Phone: +32 2 720 9270

Fax: +32 2 720 8748

www.kyoceramita.be

KYOCERA FS-C5250DN - KYOCERA MITA EUROPE B.V. - 5

DENMARK

KYOCERA MITA Denmark A/S

EjbyIndustrivej1

DK-2600 Glostrup

Phone: +45 70 22 3880

Fax: +45 45 76 3850

www.kyoceramita.dk

KYOCERA FS-C5250DN - KYOCERA MITA EUROPE B.V. - 6

FINLAND

KYOCERA MITA Finland OY

Kirvesmiehenkatu 4

FI-00880 Helsinki

Phone: +358 9 4780 5200

Fax: +358 9 4780 5390

www.kyoceramita.fi

KYOCERA FS-C5250DN - KYOCERA MITA EUROPE B.V. - 7

FRANCE

KYOCERA MITA France S.A.

KYOCERA MITA South Africa (Pty) Ltd.

527 Kyalami Boulevard, Kyalami

Business Park · ZA-1685 Midrand

Phone: +27 11 540 2600

Fax: +27 11 466 3050

www.kyoceramita.co.za

KYOCERA FS-C5250DN - KYOCERA MITA EUROPE B.V. - 8

SPAIN

8 Beacontree Plaza, Gillette Way,

Reading, Berkshire RG2 OBS

Phone: +44 1189 311 500

Fax: +44 1189 311 108

www.kyoceramita.co.uk

2-28, 1-Chome, Tamatsukuri, Chuo-ku,

Osaka 540-8585, Japan

Phone: +81 6 6764 3555

Fax: +81 6 6764 3980

www.kyoceramita.com

KYOCERA FS-C5250DN - KYOCERA MITA EUROPE B.V. - 9

USA

KYOCERA MITA America, INC.

(Head office)

225 Sand Road, P.O. Box 40008

Fairfield, New Jersey 07004-0008, USA

www.kyoceramita.com/us

KYOCERA CORPORATION

KYOCERA FS-C5250DN - KYOCERA CORPORATION - 1

JAPAN

KYOCERA CORPORATION

(Corporate Headquarters)

6 Takeda Tobadono-cho, Fushimi-ku

Kyoto 612-8501, Japan

Phone: +81 75 604 3500

Fax: +81 75 604 3501

www.kyocera.co.jp

KYOCERA FS-C5250DN - KYOCERA CORPORATION - 2

KYOCERA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : KYOCERA

Model : FS-C5250DN

Category : Color laser printer