PRM 1800 C3 - Drill driver PARKSIDE - Free user manual and instructions
Find the device manual for free PRM 1800 C3 PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Drill Driver |
| Model | PRM 1800 C3 |
| Brand | Parkside |
| Voltage | 18 V |
| Battery Type | Li-Ion, 1.5 Ah (typical) |
| No-Load Speed | 0-400 / 0-1400 rpm (2-speed) |
| Max Torque | 30 Nm |
| Chuck Type | Keyless |
| Chuck Capacity | 0.8 – 10 mm |
| Torque Settings | 20 + 1 (drill mode) |
| Weight (without battery) | 1.2 kg |
| Dimensions (L x W x H) | 210 x 65 x 200 mm |
| Includes | 2 batteries, charger, belt clip, case |
| Speed Control | Variable speed trigger |
| Forward/Reverse | Yes, with lock-off |
| LED Light | Yes, work light |
| Warranty | 2 years |
| Maintenance | Clean with dry cloth, keep vents free |
| Safety Features | Overload protection, automatic shutdown |
Frequently Asked Questions - PRM 1800 C3 PARKSIDE
What battery voltage does the PRM 1800 C3 use?
The drill driver uses an 18 V Li-Ion battery. The kit typically includes two 1.5 Ah batteries.
How do I change the chuck?
To change the chuck, loosen the keyless chuck by rotating it counterclockwise. Insert a new drill bit and tighten clockwise by hand.
What is the maximum torque?
The maximum torque is 30 Nm, adjustable via the torque ring with 20 settings plus drill mode.
How many speed settings are there?
There are two speed ranges: low (0-400 rpm) for high torque screwing and high (0-1400 rpm) for drilling.
How long does the battery take to charge?
The included charger typically takes 60-90 minutes to fully charge a 1.5 Ah battery.
Can I use this drill for concrete?
No, the PRM 1800 C3 is a drill driver without hammer action. It is not designed for masonry or concrete. Use a hammer drill for such materials.
How do I adjust the torque setting?
Rotate the torque adjustment ring located behind the chuck. Higher numbers provide more torque; the drill symbol disables torque control for full power.
What accessories are included?
The set includes two 18V batteries, a charger, a belt clip, and a plastic carry case. Drill bits are not included.
Is the motor brushless?
No, the PRM 1800 C3 features a brushed motor. Brushless models are available separately.
How should I clean the drill?
Clean the exterior with a dry, soft cloth. Keep the ventilation slots free of dust. Do not use water or solvents.
User questions about PRM 1800 C3 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill driver in PDF format for free! Find your manual PRM 1800 C3 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRM 1800 C3 by PARKSIDE.
USER MANUAL PRM 1800 C3 PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : PRM 1800 C3
Category : Drill driver