PNKP 105 C2 - Drill driver PARKSIDE - Free user manual and instructions
Find the device manual for free PNKP 105 C2 PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless drill driver |
| Brand | Parkside |
| Model | PNKP 105 C2 |
| Rated voltage | 20 V (max) |
| Battery type | Lithium-ion, compatible with Parkside X 20 V series |
| No-load speed (1st gear) | 0 – 450 rpm |
| No-load speed (2nd gear) | 0 – 1700 rpm |
| Max torque | 32 Nm (depending on battery) |
| Number of torque levels | 20 + drilling |
| Chuck capacity | 1.5 – 13 mm |
| Max drilling capacity (steel) | 10 mm |
| Max drilling capacity (wood) | 35 mm |
| Dimensions (L x W x H) | 195 x 55 x 200 mm (without battery) |
| Weight (without battery) | 0.9 kg |
| Main functions | Drilling, screwdriving, reversible, LED light, electronic speed control, spindle lock |
| Safety | Motor brake, quick stop, overload protection |
| Maintenance and cleaning | Clean with a dry cloth; avoid abrasive products; clean ventilation slots |
| Spare parts | Chuck, carbon brushes, battery, charger (supplier reference) |
| Repairability | Estimated repairability score: 8/10 (parts available) |
| Package contents | Drill driver, packaging, user manual (battery and charger sold separately depending on version) |
Frequently Asked Questions - PNKP 105 C2 PARKSIDE
How to change the chuck of the Parkside PNKP 105 C2 drill?
The chuck is a keyless chuck. To remove it, fully open the jaws, then unscrew the fixing screw located inside the chuck (clockwise). Use an Allen key (usually 4 mm) to loosen the screw, then turn the chuck counterclockwise to unscrew it.
Which battery is compatible with the PNKP 105 C2 model?
The drill is compatible with all batteries from the Parkside X 20 V series (type PABSP 20 V or similar). The battery snaps onto the bottom of the handle.
How to adjust the torque?
Turn the adjustment ring located behind the chuck. The numbered notches from 1 to 20 correspond to increasing torque for screwdriving. The drill symbol corresponds to drilling mode (maximum torque).
The drill no longer starts, what to do?
First check that the battery is charged and properly engaged. If the problem persists, check the carbon brushes (wear) and clean the contacts. If necessary, replace the brushes (Parkside reference).
How to clean the Parkside PNKP 105 C2 drill?
Use a soft, dry cloth to wipe the exterior. Never use solvents or abrasive products. The ventilation slots can be cleaned with a soft brush or compressed air.
What is the maximum speed of the drill?
The drill has two mechanical gears. In first gear, the no-load speed is 0 – 450 rpm (for high torque screwdriving). In second gear, it reaches 0 – 1700 rpm (for drilling).
How to use the LED light?
The LED light turns on automatically when you press the trigger. It illuminates the work area. There is no separate switch.
The chuck is stuck, how to unlock it?
Make sure the drill is in drilling mode (ring on the drill symbol). Use the spindle lock function by turning the chuck manually while holding the ring. If that doesn't work, tap the chuck lightly with a rubber mallet.
What is the maximum drilling capacity in steel?
The drill can drill up to 10 mm in steel. For larger diameters, use a more powerful drill or a suitable drill bit.
Where to find the complete user manual?
The complete manual is available for free on notice-facile.com in PDF format. You can also download it from the official Parkside website after entering the model number PNKP 105 C2.
User questions about PNKP 105 C2 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill driver in PDF format for free! Find your manual PNKP 105 C2 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PNKP 105 C2 by PARKSIDE.
USER MANUAL PNKP 105 C2 PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : PNKP 105 C2
Category : Drill driver