PKSB 54 A1 - Drill driver PARKSIDE - Free user manual and instructions
Find the device manual for free PKSB 54 A1 PARKSIDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Drill Driver |
| Brand | Parkside |
| Model | PKSB 54 A1 |
| Battery Voltage | 20 V |
| Battery Type | Li-ion |
| Chuck Capacity | 1 – 10 mm |
| Max Torque | 30 Nm |
| Speed Settings | 2-speed gearbox (0-400 / 0-1500 rpm) |
| No-Load Speed | 0-400 / 0-1500 rpm |
| Torque Settings | 20+1 positions |
| Drilling Capacity (Wood) | Up to 25 mm |
| Drilling Capacity (Steel) | Up to 10 mm |
| Dimensions (L x W x H) | 200 x 65 x 180 mm |
| Weight (with battery) | 1.2 kg |
| Power Supply | Rechargeable battery (not included) |
| Charger Input | 100-240 V AC, 50/60 Hz |
| Charging Time | Approx. 1 hour |
| Battery Capacity | 2.0 Ah |
| Safety Features | Overload protection, soft grip handle, LED work light |
| Maintenance | Keep vents clean; lubricate chuck regularly |
| Spare Parts | Chuck, carbon brushes, battery pack available |
| Repairability | Designed for easy disassembly; user replaceable parts |
| Accessories Included | Double-ended screwdriver bit, carrying case |
| Warranty | 2 years |
Frequently Asked Questions - PKSB 54 A1 PARKSIDE
What battery does the Parkside PKSB 54 A1 use?
The drill uses a 20V Li-ion battery from the Parkside X-series (not included). Ensure compatibility with your charger.
How do I change the chuck on this drill?
To change the chuck, loosen the chuck's retaining screw (left-handed thread) using a screwdriver, then unscrew the chuck from the spindle. Reverse steps to install a new chuck.
What is the torque setting for driving screws?
The drill has 20+1 torque settings. For small screws, use lower numbers (1-5); for larger screws, increase the setting. The 'drill' mode (max torque) is for drilling only.
How long does the battery last on a full charge?
With a 2.0 Ah battery, runtime varies: up to 50 minutes of light drilling or 200 screws. Heavy use reduces runtime.
Can I use this drill for hammer drilling?
No, the PKSB 54 A1 is a drill driver only. It does not have a hammer function. For masonry, use a hammer drill.
What is the maximum drilling capacity?
In wood, up to 25 mm; in steel, up to 10 mm. Use sharp bits and proper speed settings.
How do I clean and maintain the drill?
Keep air vents free of dust using a brush. Wipe the exterior with a dry cloth. Lubricate the chuck periodically with light oil.
Where can I find spare parts?
Spare parts such as chucks, brushes, and batteries are available from Parkside service centers or online. Use only original spare parts.
Is the drill compatible with other Parkside batteries?
Yes, it works with all 20V Parkside X-series batteries. Older 18V batteries are not compatible.
Why does the drill stop suddenly?
This may be due to overload protection or a flat battery. Let the drill cool down and recharge the battery if needed.
User questions about PKSB 54 A1 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill driver in PDF format for free! Find your manual PKSB 54 A1 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PKSB 54 A1 by PARKSIDE.
USER MANUAL PKSB 54 A1 PARKSIDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PARKSIDE
Model : PKSB 54 A1
Category : Drill driver