ES 1002 - Speaker DB Technologies - Free user manual and instructions
Find the device manual for free ES 1002 DB Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | 2-way passive speaker |
| Brand | DB Technologies |
| Model | ES 1002 |
| Nominal power | 300 W RMS |
| Impedance | 8 ohms |
| Frequency response | 50 Hz - 20 kHz |
| Speakers | Woofer 12" (300 mm), Tweeter 1" (25 mm) |
| Dimensions (W x H x D) | 400 x 600 x 380 mm |
| Weight | 18 kg |
| Enclosure material | MDF with polyurethane coating |
| Connectors | 2 x Speakon (input/output) |
| Recommended use | Sound reinforcement, music playback |
| Maintenance | Clean with a soft dry cloth, avoid moisture |
| Safety | Do not expose to water, use a suitable support |
| Spare parts available | Woofer, tweeter, cables, protective grille |
Frequently Asked Questions - ES 1002 DB Technologies
What is the recommended amplifier power for the ES 1002?
The ES 1002 has a nominal power of 300 W RMS at 8 ohms. It is recommended to use an amplifier delivering between 300 and 600 W RMS for sufficient dynamic headroom.
How to connect the ES 1002 speaker?
Use a Speakon cable to connect the amplifier to the speaker input. If using multiple speakers, connect the Speakon output of the first to the input of the next, respecting the total impedance.
What type of cable to use for the ES 1002?
Use quality Speakon cables with a cross-section of at least 2.5 mm² for lengths up to 10 meters.
How to clean the ES 1002 speaker?
Clean the enclosure with a soft dry cloth. Do not use chemicals or water, as this could damage the coating.
What are the exact dimensions of the ES 1002?
The dimensions are 400 mm width, 600 mm height, and 380 mm depth.
Can the ES 1002 be used outdoors?
The speaker is not designed for outdoor use without protection. Avoid direct exposure to rain or moisture.
What is the frequency response of the ES 1002?
The frequency response is 50 Hz to 20 kHz, allowing it to reproduce low frequencies down to 50 Hz.
How to maintain the Speakon connectors?
Regularly check the condition of the connectors and clean them with a dry cloth. If contacts are oxidized, use a special contact spray.
Where can I buy spare parts for the ES 1002?
Contact an authorized DB Technologies dealer or visit the official website to order a woofer, tweeter, or protective grille.
What is the warranty of the ES 1002?
The standard warranty is 2 years. Keep the purchase receipt and manual for any claims.
User questions about ES 1002 DB Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual ES 1002 - DB Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ES 1002 by DB Technologies.
USER MANUAL ES 1002 DB Technologies
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DB Technologies
Model : ES 1002
Category : Speaker