DXS-1210-16TC - Switch D-LINK - Free user manual and instructions
Find the device manual for free DXS-1210-16TC D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | 10 Gigabit Ethernet managed switch |
| Brand | D-Link |
| Model | DXS-1210-16TC |
| Number of ports | 12 SFP+ 10G ports + 4 combo 10GBASE-T/SFP+ ports |
| Bandwidth | 10 Gbps per port, up to 320 Gbps switching capacity |
| Dimensions (W x D x H) | 440 x 260 x 44 mm |
| Weight | 3.2 kg |
| Power supply | AC 100-240 V, 50-60 Hz, internal |
| Power consumption | 60 W (max) |
| Cooling | Internal fans, side airflow |
| Management | Smart Managed (Web interface, CLI, SNMP) |
| Key features | VLAN, QoS, IGMP Snooping, Link Aggregation, Spanning Tree, ACL |
| Mounting | 19-inch rack (mounting kit included) |
| Operating temperature | 0 °C to 45 °C |
| Operating humidity | 10% to 90% non-condensing |
| Care and cleaning | Use a dry, lint-free cloth. Do not use liquid or abrasive cleaners. Unplug before cleaning. |
| Safety | Unplug the power supply before any intervention. Do not open the casing. Use in a dry, ventilated environment. |
| Spare parts and repairability | No spare parts provided. For any repairs, contact D-Link support. |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - DXS-1210-16TC D-LINK
How to reset the D-Link DXS-1210-16TC switch to factory settings?
Press and hold the Reset button on the front panel for about 10 seconds until the Power LED blinks. The settings will return to default values.
What is the default IP address of the switch?
The default IP address is 10.90.90.90 with netmask 255.0.0.0. Use this address to access the web interface.
How to configure a VLAN on the DXS-1210-16TC?
Access the web interface, go to L2 Features > VLAN. Create a new VLAN, assign ports with Tagged or Untagged mode as needed.
How to update the switch firmware?
Download the latest firmware from the D-Link website, then in the web interface go to System > Firmware Upgrade, select the file and click Upgrade. Do not turn off power during the update.
What types of SFP+ cables are compatible?
The switch accepts standard 10G SFP+ modules, including SFP+ copper cables (10GBASE-CR) and fiber modules (10GBASE-SR/LR). Prefer D-Link modules for optimal compatibility.
How to enable inter-VLAN routing?
In the web interface, go to L3 Features > IP Interface. Create an IP interface for each VLAN, then configure the gateway. Ensure IP routing is enabled in System > System Settings.
The switch is very noisy, is this normal?
Yes, the internal fans are necessary to dissipate heat from the 10G ports. Noise is normal. Place the switch in a ventilated technical room.
How to configure Link Aggregation?
Create an aggregation group in L2 Features > Link Aggregation, select the ports to aggregate and choose Static or LACP mode. Configure the connected equipment identically.
What to do if the Power LED stays off?
Check the power cable and wall outlet. If the problem persists, the internal power supply may be faulty. Contact D-Link support for repair.
How to access the management interface via SSH?
Enable SSH in System > Management Security > SSH. Use an SSH client with the switch's IP address. The default login is admin with password admin.
User questions about DXS-1210-16TC D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual DXS-1210-16TC - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DXS-1210-16TC by D-LINK.
USER MANUAL DXS-1210-16TC D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DXS-1210-16TC
Category : Switch