DGS-1210/ME - Switch D-LINK - Free user manual and instructions
Find the device manual for free DGS-1210/ME D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Switch |
| Model | DGS-1210/ME |
| Brand | D-Link |
| Ports | 24 Gigabit Ethernet ports + 4 SFP slots |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | 802.1Q VLAN, up to 255 VLAN groups |
| Quality of Service (QoS) | 802.1p, 8 priority queues, port-based, DSCP |
| Management | Web-based GUI, SNMP v1/v2c/v3, CLI via Telnet/SSH |
| Security Features | 802.1X, ACL, Port Security, Storm Control |
| Power Supply | Internal AC 100-240V, 50/60Hz, max 24W |
| Dimensions (W x D x H) | 440 x 210 x 44 mm (19-inch rack mount) |
| Weight | 3.2 kg |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC, RoHS |
| Maintenance | Clean with dry cloth, ensure adequate ventilation |
| Safety Cautions | Do not block vents, avoid exposure to liquids |
| Spare Parts & Repairability | No user-serviceable parts; contact D-Link support |
Frequently Asked Questions - DGS-1210/ME D-LINK
How to reset the D-Link DGS-1210/ME switch to factory defaults?
Press and hold the reset button on the front panel for about 10 seconds until the LED indicators blink. This restores default settings.
What is the default IP address and login for the web interface?
Default IP is 10.90.90.90, default username is 'admin', password is blank.
Can I use VLANs on this switch?
Yes, it supports 802.1Q VLAN with up to 255 VLAN groups. Configure via web GUI or CLI.
How to update the firmware on DGS-1210/ME?
Download the latest firmware from D-Link support, then upload via web interface under Tools > Firmware Upgrade.
How to enable port mirroring?
Go to Monitoring > Port Mirroring in the web GUI, select source and destination ports.
What is the maximum number of MAC addresses per port?
You can set port security with up to 64 MAC addresses per port.
How to troubleshoot no network connectivity?
Check cable connections, verify port LEDs, ensure correct VLAN configuration, and reboot the switch.
Does this switch support PoE?
The DGS-1210/ME model does not support PoE. Use DGS-1210/ME PoE variant if needed.
How to configure SNMP monitoring?
Enable SNMP in Management > SNMP Settings, and set community strings. Supports SNMP v1/v2c/v3.
What is the warranty period for DGS-1210/ME?
D-Link offers a limited lifetime warranty for this switch. Check your region for details.
User questions about DGS-1210/ME D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual DGS-1210/ME - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGS-1210/ME by D-LINK.
USER MANUAL DGS-1210/ME D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DGS-1210/ME
Category : Switch