DXS-3600-16S - Switch D-LINK - Free user manual and instructions
Find the device manual for free DXS-3600-16S D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 10 Gigabit Ethernet Switch |
| Brand | D-Link |
| Model | DXS-3600-16S |
| Number of Ports | 16 SFP+ 10 Gigabit Ethernet ports |
| Key Features | Layer 2/3 management, VLAN, QoS, Link Aggregation, IGMP Snooping, STP, ACL |
| Dimensions | 440 x 310 x 44 mm (19-inch rack mount, 1U) |
| Weight | Approximately 5.5 kg |
| Power Supply | AC 100-240 V, 50/60 Hz, optional redundant internal power supply |
| Power Consumption | Approximately 120 W (max) |
| Operating Temperature | 0 °C to 50 °C |
| Operating Humidity | 10% to 90% non-condensing |
| Maintenance and Cleaning | Unplug the device before cleaning. Use a soft, dry cloth. Do not use chemical products. |
| Safety | Install in a dry, well-ventilated area. Do not block ventilation grilles. Avoid electrical overloads. |
| Spare Parts and Repairability | Spare parts are available from D-Link support. Repair must be carried out by a qualified technician. The repairability index is not provided by the manufacturer. |
| Warranty | Refer to D-Link warranty terms (typically 2 to 5 years depending on country) |
| Included Accessories | Power cable, rack mount kit, console cable, quick installation guide |
| General Information | Layer 3 switch, designed for enterprise networks. Supports static and dynamic routing. Ideal for data centers and backbones. |
Frequently Asked Questions - DXS-3600-16S D-LINK
How to reset the D-Link DXS-3600-16S switch to factory defaults?
Press and hold the **Reset** button on the front of the device for at least 5 seconds. The **System** LED will blink and the switch will restart with default settings.
What types of SFP+ cables can I use with the DXS-3600-16S?
Use D-Link compatible 10 Gigabit Ethernet SFP+ modules (e.g., DEM-431XT, DEM-432XT) or passive Twinax cables up to 7 meters. Single-mode or multi-mode optical cables are supported with appropriate modules.
How to configure a VLAN on the DXS-3600-16S?
Access the Web interface via the switch's IP address. Go to **Configuration > VLAN > VLAN Static**. Create a VLAN by specifying an ID and member ports. Apply the changes.
What is the maximum power consumption of the switch?
The maximum consumption is approximately 120 Watts. For redundant power supply, use the optional DPS-500A module.
Can I use standard RJ45 Ethernet cables on this switch?
No, the DXS-3600-16S is equipped only with SFP+ ports. For an RJ45 connection, you must use an SFP+ to RJ45 module (e.g., DEM-431XT) that converts the signal.
How to update the firmware of the DXS-3600-16S?
Download the latest firmware from the D-Link website. Log in to the Web interface, go to **Maintenance > Firmware Upgrade**, select the file and start the update. Do not turn off power during the process.
Does the switch support static routing?
Yes, the DXS-3600-16S supports static and dynamic routing (RIP, OSPF). You can configure static routes via **Configuration > Routing > Static Routes**.
How can I access the default management interface?
By default, the switch obtains an IP address via DHCP on the network. If no DHCP server is found, it uses the static IP address 10.90.90.90. Connect a network cable to a port and configure your PC on the same subnet, then open a browser to https://10.90.90.90.
Is the DXS-3600-16S compatible with IEEE 802.3az (Energy Efficient Ethernet)?
Yes, this switch supports EEE to reduce power consumption when ports are idle. This feature can be enabled or disabled in the port settings.
What to do if the power LED does not light up?
Check that the power cable is properly connected to the switch and to a functioning electrical outlet. If the problem persists, try another cable or contact D-Link support.
User questions about DXS-3600-16S D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual DXS-3600-16S - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DXS-3600-16S by D-LINK.
USER MANUAL DXS-3600-16S D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DXS-3600-16S
Category : Switch