BAC332 - Lamp BeamZ - Free user manual and instructions
Find the device manual for free BAC332 BeamZ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | LED effect lamp |
| Model | BAC332 |
| Brand | BeamZ |
| Light source | LED RGBW 12 x 3W |
| Rated power | 36 W |
| Power supply voltage | AC 100-240V, 50/60Hz |
| Power consumption | 40 W max |
| Dimensions (L x W x H) | 240 x 240 x 280 mm |
| Weight | 2.5 kg |
| Beam angle | 25° |
| Color temperature | Adjustable, 2700K - 6500K |
| Control modes | DMX512, master/slave, standalone, sound-activated, via IR |
| DMX channels | 5/7/10 channels |
| Built-in functions | Strobe, fade, wave effect, auto color change |
| DMX input/output | 3-pin XLR |
| Cooling | Silent fan |
| Protection rating | IP20 (indoor use) |
| Housing color | Black |
| Cleaning | Wipe with a dry lint-free cloth, avoid solvents |
| Safety instructions | Use only indoors, do not expose to moisture, disconnect before maintenance |
| Spare parts and repairability | LED and power supply not user-replaceable; contact a qualified technician |
| Included accessories | IR remote control, power cable, mounting bracket |
Frequently Asked Questions - BAC332 BeamZ
How to reset the BeamZ BAC332 lamp to factory settings?
To reset, press and hold the 'Menu' button for 5 seconds until 'Reset' appears. Confirm with 'Enter'. The device will restart automatically.
The lamp does not turn on, what to do?
First check that the power cable is properly plugged in and that the outlet works. Then make sure the fuse has not blown (see manual for its location). If the problem persists, contact a technician.
How to use the lamp in master/slave mode with multiple units?
Configure one lamp as 'Master' and the others as 'Slave' via the menu. Daisy-chain them with DMX cables. The master lamp will control the slaves in sync.
What are the available DMX channels and what do they do?
The lamp offers several DMX modes: 5 channels (dim, red, green, blue, strobe), 7 channels (adds effects and macros) and 10 channels (advanced control). The detailed DMX table is in the manual.
How to clean the lenses and housing?
Use a soft dry lint-free cloth to wipe off dust. For stubborn dirt, slightly dampen with distilled water. Never use solvents or abrasive cleaners.
The lamp flashes or no longer responds to the remote control, what to do?
Check that the remote control batteries are charged and that you are within the range (about 5 meters). Make sure the lamp is in 'IR' or 'Audio' mode. If the problem persists, reset the lamp.
What is the lifespan of the LEDs?
The LEDs of the BAC332 series have an estimated lifespan of 50,000 hours under normal use, which corresponds to several years of use in a nightclub or show.
Can I use this lamp outdoors?
No, the IP20 rating means the lamp is designed only for indoor use, away from moisture and water splashes. Outdoor use could damage it.
How to install the lamp on a stand or structure?
Use the included mounting bracket with a suitable clamp. Securely fasten the lamp via a safety hole and ensure the structure can support the weight (2.5 kg). Installation should be done by a professional.
What to do if the lamp emits a burning smell?
Immediately turn off the lamp and unplug it. The smell could come from an overheated component or short circuit. Let it cool down and inspect the cables. Do not reuse the device until it has been checked by a technician.
User questions about BAC332 BeamZ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual BAC332 - BeamZ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BAC332 by BeamZ.
USER MANUAL BAC332 BeamZ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BeamZ
Model : BAC332
Category : Lamp