BAC330 - Lamp BeamZ - Free user manual and instructions
Find the device manual for free BAC330 BeamZ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | LED projection lamp |
| Brand | BeamZ |
| Model | BAC330 |
| Light source | LED RGBW 3W x 108 (approx.) |
| Power consumption | 30 W |
| Power supply | 100-240 V AC, 50/60 Hz |
| Dimensions (Length x Depth x Height) | 240 x 240 x 280 mm |
| Weight | 2.5 kg |
| Beam angle | 25° |
| DMX protocol | DMX512 (3 channels) |
| Operating modes | DMX, master/slave, auto, sound, static |
| Functions | Strobe, 0-100% dimming, RGBW color mixing |
| Maintenance | Clean with a soft, dry cloth; avoid solvents |
| Operating temperature | -10°C to 40°C |
| Protection | 1A fuse (replace with identical model) |
| Repairability | Spare parts available through BeamZ after-sales service |
| General information | Indoor use, CE compliant |
Frequently Asked Questions - BAC330 BeamZ
How to connect the BAC330 lamp to a DMX controller?
Use a 3-pin XLR cable. Connect the DMX output of the controller to the DMX IN input of the lamp. Set the DMX address via the control panel.
Can the lamp be used in standalone mode without a controller?
Yes, select Auto or Sound mode from the lamp menu. It will then run a built-in program or react to music.
How to reset the lamp to factory settings?
Press the MENU button and navigate to the Reset or Factory Default option. Confirm with ENTER.
What types of DMX cables are recommended?
Use specific DMX cables with 120 ohm impedance. Avoid standard microphone cables to prevent interference.
How to clean the lamp optics?
Unplug the device. Use a soft, lint-free cloth slightly damp. Never use abrasive products or solvents.
The lamp does not turn on, what to do?
Check the power cable, the fuse (located near the input socket) and that the power outlet works. If the fuse is blown, replace it with an identical model.
What is the LED lifespan?
The built-in LEDs have a typical lifespan of 50,000 hours. Under normal use, they last several years without requiring replacement.
Can the lamp be mounted on the ceiling or on a tripod?
Yes, it has a mounting bracket with a standard M10 thread. Use a safety sling when suspending overhead.
How to synchronize multiple BAC330 lamps?
Connect the lamps in a daisy chain via DMX. Set the first to Master mode and the following to Slave mode. They will then run the same program.
Where to find spare parts and after-sales service?
Contact BeamZ after-sales service via the official website or your dealer. Parts such as the fuse or power supply can be ordered.
User questions about BAC330 BeamZ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual BAC330 - BeamZ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BAC330 by BeamZ.
USER MANUAL BAC330 BeamZ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BeamZ
Model : BAC330
Category : Lamp