Tiger 9R - Lamp BeamZ - Free user manual and instructions
Find the device manual for free Tiger 9R BeamZ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stage Lighting Lamp |
| Brand | BeamZ |
| Model | Tiger 9R |
| Category | Lamp |
| Dimensions (L x W x H) | 300 x 250 x 400 mm |
| Weight | 4.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 200 W |
| Light Source | 9 x 3 W RGBA LED |
| Beam Angle | 25° |
| Control Mode | DMX, master/slave, auto, sound |
| DMX Channels | 9 channels |
| Refresh Rate | 1-25 Hz |
| Color Temperature | 3000-8000 K |
| Protection Rating | IP20 |
| Maintenance and Cleaning | Use a dry, soft cloth. Do not use solvents. |
| Safety | Disconnect power before any intervention. Do not expose to moisture. |
| Spare Parts | Fuse, power cable |
| Repairability | LED replacement by a professional |
| General Information | Indoor use. Mount on tripod or stand. |
Frequently Asked Questions - Tiger 9R BeamZ
How to connect the Tiger 9R lamp via DMX?
Use a 3-pin XLR DMX cable. Connect the controller output to the lamp's DMX input. Set the DMX address via the control panel. Ensure the cable is terminated with a 120 ohm resistor on the last unit.
What to do if the lamp does not turn on?
Check the power cable and fuse. Ensure the power supply is working. If the fuse is blown, replace it with an identical one. If the problem persists, contact a technician.
How to clean the Tiger 9R lamp?
Unplug the lamp before cleaning. Use a dry, soft cloth to remove dust. Never use chemicals or solvents.
What operating modes are available?
The lamp offers DMX, master/slave, auto, and sound modes. In auto mode, it runs built-in programs. In sound mode, it reacts to music via the built-in microphone.
How to set the DMX address?
Use the control panel: press the MENU button, navigate to 'DMX Address', use UP/DOWN buttons to set address (1-512), then confirm with ENTER.
Does the lamp heat up normally?
Yes, some heat is normal. Ensure ventilation openings are not blocked. Do not place the lamp near flammable materials. If it becomes too hot, reduce power or let it cool.
Can the lamp be used outdoors?
No, the IP20 rating means it is designed for indoor use only, away from moisture and dust.
How to install the lamp on a tripod?
Use the supplied mounting bracket. Attach the lamp to the tripod using the hook and safety screw. Ensure the tripod is stable and can support the lamp weight (4.5 kg).
What to do if the LEDs flash irregularly?
Check the DMX connection and cables. Ensure the operating mode is correct. If the problem persists, reset the lamp via the 'Reset' menu or restart it.
Where can I find the complete user manual?
The full manual is available for download in PDF format on the notice-facile.com product page. You can also request a translation in your language via the form on the site.
User questions about Tiger 9R BeamZ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual Tiger 9R - BeamZ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Tiger 9R by BeamZ.
USER MANUAL Tiger 9R BeamZ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BeamZ
Model : Tiger 9R
Category : Lamp