THOR BT-PS006 - Saw Batavia - Free user manual and instructions
Find the device manual for free THOR BT-PS006 Batavia in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Batavia |
| Model | THOR BT-PS006 |
| Product type | Circular saw |
| Dimensions (L x W x H) | 300 x 200 x 200 mm |
| Weight | 3.0 kg |
| Power supply | Mains 230 V ~ 50 Hz |
| Rated power | 1200 W |
| No-load speed | 5000 rpm |
| Blade diameter | 184 mm |
| Max cutting depth (90°) | 62 mm |
| Max cutting depth (45°) | 42 mm |
| Bevel angle | 0° to 45° |
| Main functions | Crosscuts, rip cuts, and miter cuts |
| Maintenance and cleaning | Regularly clean the ventilation slots and blade with a soft brush |
| Safety | Anti-kickback protection, spindle lock, double safety switch |
| Spare parts and repairability | Replacement blade available, replaceable motor brushes |
| General information | Versatile circular saw for DIY, suitable for wood and derived materials |
Frequently Asked Questions - THOR BT-PS006 Batavia
How to change the blade of the THOR BT-PS006 circular saw?
Unplug the tool, press the spindle lock, then use the supplied wrench to loosen the flange screw. Replace the blade and retighten the screw.
What is the maximum cutting depth?
At 90°, the cutting depth is 62 mm; at 45°, it is 42 mm.
How to set the bevel angle?
Unlock the bevel lever at the front of the base, set the desired angle (0° to 45°) using the scale, then lock the lever.
The saw does not start, what to do?
Check that the power cord is plugged in and that the safety switch is in the on position. If the problem persists, contact customer service.
What materials can I cut with this saw?
This saw is designed for cutting wood, particle board, plywood, and similar materials. Do not use for metal or masonry.
How to maintain the circular saw?
Regularly clean the ventilation slots with a brush, check the motor brushes for wear, and sharpen or replace the blade if necessary.
Can I use a blade of a different diameter?
No, only use blades of 184 mm diameter, with a 20 mm arbor, to ensure safety and performance.
How to use the parallel guide?
Insert the guide into the slots on the base, tighten the locking screws, then adjust the distance from the blade according to the desired cutting width.
What if the cut is not straight?
Make sure the parallel guide is properly adjusted, the blade is sharp, and the workpiece is securely held. Also check the base plate angle.
The saw vibrates abnormally, is this normal?
Excessive vibration may indicate an unbalanced or improperly secured blade. Check the blade tightening and condition. If vibrations persist, contact customer service.
User questions about THOR BT-PS006 Batavia
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual THOR BT-PS006 - Batavia and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. THOR BT-PS006 by Batavia.
USER MANUAL THOR BT-PS006 Batavia
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Batavia
Model : THOR BT-PS006
Category : Saw