Lison - Heating Air&Me - Free user manual and instructions
Find the device manual for free Lison Air&Me in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Air&Me |
| Model | Lison |
| Product type | Electric space heater |
| Dimensions (L x H x D) | 40 x 60 x 25 cm |
| Weight | 5.2 kg |
| Power supply | 230 V ~ 50 Hz |
| Heating power | 2000 W (max.) |
| Recommended heating area | 20 to 25 m² |
| Adjustable thermostat | Yes, from 5°C to 35°C |
| Operating modes | Comfort, Eco, Frost-free, Boost |
| Programmable timer | 24h / 7 days |
| Digital display | Yes, with temperature display |
| Remote control | Yes, included |
| Tip-over safety | Yes, automatic shut-off |
| Overheat protection | Yes, safety thermostat |
| Protection rating | IP24 (bathroom) |
| Noise level | < 25 dB (silent) |
| Air filter | Washable, removable filter |
| Maintenance and cleaning | Dust regularly, clean the filter dry |
| Spare parts available | Yes (filter, remote, feet) |
| Warranty | 2 years |
Frequently Asked Questions - Lison Air&Me
How to set the desired temperature?
Use the + or - button on the device or remote control to adjust the temperature in 0.5°C increments. The set temperature is displayed on the screen.
The heater turns off by itself, what to do?
Check if the timer is activated or if Frost-free mode is selected. If the problem persists, clean the air filter and make sure the air inlets are not blocked.
Can I use this device in a bathroom?
Yes, the device has an IP24 protection rating, which protects against water splashes. Install it at least 60 cm from a water source.
How to program automatic start?
Press the Timer button, set the desired start and end time using the +/- keys, then confirm. You can program up to 4 time slots per day.
What to do if the screen displays an error code?
Error codes are listed in the manual. The most common is E1 (overheating): turn off the device, let it cool for 30 minutes and check the filter cleanliness.
How to clean the air filter?
Remove the filter by pulling it outward. Wash it with warm soapy water, rinse and dry it completely before putting it back. Never use without filter.
The device makes a clicking noise, is this normal?
Yes, it is the sound of material expansion during heating and cooling. It is normal and safe. If the noise becomes continuous, contact customer service.
Can I use an extension cord?
It is not recommended to use an extension cord. Plug the device directly into a grounded wall outlet. If necessary, use an extension cord with a minimum cross-section of 1.5 mm² and fully unwound.
How to activate Boost mode?
Press the Mode button twice until Boost appears on the screen. The device heats at full power for 30 minutes, then automatically returns to Comfort mode.
Where to find spare parts?
Spare parts (filter, remote, feet) are available on the website air-et-me.com or from your retailer. Use only original parts.
User questions about Lison Air&Me
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual Lison - Air&Me and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lison by Air&Me.
USER MANUAL Lison Air&Me
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Air&Me
Model : Lison
Category : Heating