PSH 100 Classic - Boiler STIEBEL ELTRON - Free user manual and instructions
Find the device manual for free PSH 100 Classic STIEBEL ELTRON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric storage heater |
| Capacity | 100 litres |
| Dimensions (H x W x D) | 1000 x 500 x 500 mm |
| Weight | 30 kg |
| Power supply | 230 V / 50 Hz |
| Rated power | 2 kW |
| Maximum set temperature | 65 °C |
| Installation type | Vertical wall-mounted |
| Water connection | DN 15 (1/2 inch) |
| Thermal insulation | CFC-free polyurethane, 50 mm |
| Control | Electronic thermostat with LED display |
| Main functions | Domestic hot water heating, storage, frost protection |
| Maintenance and cleaning | Annual drain, exterior cleaning with soft cloth, check magnesium anode |
| Safety | Temperature limiter, safety valve, IP24 protection |
| Spare parts and repairability | Magnesium anode, heating element, thermostat, tank gasket available |
| General information | Brand Stiebel Eltron, model PSH 100 Classic, made in Germany |
Frequently Asked Questions - PSH 100 Classic STIEBEL ELTRON
How to install the Stiebel Eltron PSH 100 Classic water heater?
Installation must be carried out by a qualified professional. Fix the device to the wall with the supplied plugs, connect cold and hot water according to the diagram, then plug in the power supply. Ensure compliance with safety distances and install a safety group on the cold water inlet.
What is the capacity of the PSH 100 Classic?
This model has a capacity of 100 liters, ideal for a household of 2 to 3 people.
How to adjust the water temperature?
Use the electronic thermostat on the front panel. Turn the dial to set the temperature between 30°C and 65°C. The recommended temperature is 55°C to avoid burns and limescale deposits.
What to do if the water does not heat up?
First check the power supply (circuit breaker), then the thermostat. If the indicator light is on but the water remains cold, the heating element may be defective. Contact a professional to replace the heating element.
How to maintain the water heater?
Once a year, drain a few liters of water to remove deposits. Check the condition of the magnesium anode: if it is worn by more than 50%, replace it. Clean the exterior with a soft, non-abrasive cloth.
What safety devices are there?
The device is equipped with a temperature limiter (overheat protection) and a safety valve (safety group) to be installed on the cold water inlet. It protects against overpressure and excessive temperatures.
What is the power consumption of the PSH 100 Classic?
The power is 2 kW. Consumption depends on the set temperature and the amount of water used. On average, count about 4 to 5 kWh per day for a family of 2 people.
Where to find spare parts?
Spare parts such as the magnesium anode, heating element, thermostat, and gaskets are available from authorized Stiebel Eltron dealers or specialized spare parts websites.
The water heater is making an abnormal noise, what to do?
A cracking or whistling noise may indicate limescale buildup on the heating element. Proceed to descale by heating water with white vinegar or a descaling product. If the noise persists, have the device checked.
What is the warranty of the PSH 100 Classic?
The manufacturer's warranty is generally 2 years on the device and 5 years on the tank (subject to installation by a professional). Keep the invoice and manual for any claims.
User questions about PSH 100 Classic STIEBEL ELTRON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual PSH 100 Classic - STIEBEL ELTRON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSH 100 Classic by STIEBEL ELTRON.