PSH 80 Classic - Boiler STIEBEL ELTRON - Free user manual and instructions
Find the device manual for free PSH 80 Classic STIEBEL ELTRON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Storage Water Heater |
| Brand | Stiebel Eltron |
| Model | PSH 80 Classic |
| Tank Capacity | 80 liters |
| Energy Type | Electric |
| Supply Voltage | 230 V / 50 Hz |
| Power Consumption | 2000 W |
| Electrical Protection | Class I |
| Protection Rating | IP24 |
| Height | 85 cm |
| Diameter | 45 cm |
| Dry Weight | 24 kg |
| Tank Material | Enameled Steel |
| Thermal Insulation | CFC-free Polyurethane |
| Anti-corrosion Protection | Magnesium Anode |
| Set Temperature | Adjustable from 35 to 85 °C |
| Safety Thermostat | Yes (cut-off at 95 °C) |
| Safety Unit | Provided (7 bar valve) |
| Frost Protection Function | Yes (protection down to -15 °C) |
| Recommended Maintenance | Annual drain and anode check |
| Repairability Index | 8.0 / 10 |
| Spare Parts Availability | Manufacturer parts for 15 years |
| Manufacturer Warranty | 2 years |
Frequently Asked Questions - PSH 80 Classic STIEBEL ELTRON
How to install the Stiebel Eltron PSH 80 Classic water heater?
Installation must be carried out by a qualified professional. Ensure safety distances are respected, connect the safety unit, and bleed the air before commissioning. Refer to the wiring diagram in the manual.
What is the ideal temperature for the PSH 80 Classic?
The set temperature is adjustable between 35 °C and 85 °C. For daily use, a temperature of 55 °C to 60 °C is recommended to avoid burns and limit scale buildup.
How to maintain the water heater?
It is advised to drain the tank once a year and check the condition of the magnesium anode. Clean the exterior with a damp cloth without abrasive products.
What to do in case of water leakage?
Immediately cut off the power supply and close the water inlet. Check the connections and the safety unit. If the leak persists, contact a professional.
The water heater makes noise, is this normal?
A slight clicking during heating may be due to expansion. Hissing noises often indicate excessive scale. Descaling may be necessary.
How to save energy with the PSH 80 Classic?
Set the temperature to 55 °C, insulate the pipes, and use a timer to heat water during off-peak hours if your installation allows.
Hot water no longer flows, what to check?
First check the power supply and circuit breaker. If the operation light is off, the safety thermostat may have tripped. Reset it if necessary.
What is the average lifespan of the PSH 80 Classic?
With regular maintenance (replacing the anode every 2 to 5 years), this water heater can last between 10 and 20 years.
Can I install the water heater outdoors?
No, this model is designed for indoor installation protected from frost. The IP24 rating protects against water splashes, but not against weather conditions.
Where to find spare parts for the PSH 80 Classic?
Spare parts are available from Stiebel Eltron or authorized dealers. Use the model number (PSH 80 Classic) to identify parts such as the anode, thermostat, or heating element.
User questions about PSH 80 Classic STIEBEL ELTRON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual PSH 80 Classic - STIEBEL ELTRON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSH 80 Classic by STIEBEL ELTRON.
USER MANUAL PSH 80 Classic STIEBEL ELTRON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STIEBEL ELTRON
Model : PSH 80 Classic
Category : Boiler