PSH 150 Classic - Boiler STIEBEL ELTRON - Free user manual and instructions
Find the device manual for free PSH 150 Classic STIEBEL ELTRON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric storage water heater |
| Brand | Stiebel Eltron |
| Model | PSH 150 Classic |
| Capacity | 150 liters |
| Electrical power | 2 kW |
| Supply voltage | 230 V / 50 Hz |
| Maximum working pressure | 10 bar |
| Net weight | 65 kg |
| Dimensions (H x Ø) | 1200 x 600 mm |
| Tank material | Enameled steel |
| Anti-corrosion protection | Magnesium anode |
| Energy class | C |
| Installation type | Floor-standing or wall-mounted vertical |
| Water connection | Inlet and outlet 3/4" |
| Maximum water temperature | 85 °C |
| Electronic control | Adjustable thermostat |
| Temperature indicator | Built-in thermometer |
| Anti-freeze function | Yes |
| Overheat safety | Thermal circuit breaker |
| Safety group included | Yes |
| Routine maintenance | Annual drain and anode inspection |
| Spare parts available | Anode, heating element, thermostat, seals |
| Repairability | Repairability index: 7.5/10 |
Frequently Asked Questions - PSH 150 Classic STIEBEL ELTRON
How to install the PSH 150 Classic water heater?
Installation must be carried out by a qualified professional. Connect the appliance to the cold water supply and the hot water distribution circuit. Install the supplied safety group on the cold water inlet. Connect the power supply (230 V) to a dedicated circuit with a 16 A circuit breaker.
What is the recommended set temperature?
The usual set temperature is 60 °C. To save energy, you can set it to 55 °C. Avoid exceeding 65 °C to limit limescale deposits.
How to adjust the temperature?
Turn the thermostat knob on the front panel. The adjustment range is from 30 °C to 85 °C. The built-in indicator lights up when the heating element is heating.
When and how to drain the water heater?
Drain the appliance at least once a year. Turn off the power supply, close the water inlet, open a hot water faucet, then open the drain valve at the bottom of the appliance. Let the water drain completely.
How to check the condition of the magnesium anode?
The anode must be inspected every 2 years. To access it, unscrew the top cover and remove the anode. Replace it if it is reduced by more than 50% of its original diameter.
What to do in case of water leakage?
Immediately cut off the power supply and water supply. Check the connections and the safety group. If the leak comes from the tank, the appliance must be replaced by a professional.
Why is the water heater not heating?
Check that the thermostat is not in the off position, that the circuit breaker has not tripped, and that the heating element is not defective. If the indicator does not light up, contact a professional.
What regular maintenance is required?
In addition to the annual drain, it is recommended to check the safety group every month by operating the lever, and to descale the heating element every 3 to 5 years depending on water hardness.
Where to find spare parts for the PSH 150 Classic?
Spare parts (anode, heating element, thermostat, seals) are available from Stiebel Eltron authorized dealers or on specialized household appliance spare parts websites.
What is the warranty of the appliance?
The legal warranty of conformity is 2 years. Stiebel Eltron also offers an additional contractual warranty on the tank (often 5 to 10 years, depending on conditions). Keep the purchase receipt.
User questions about PSH 150 Classic STIEBEL ELTRON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual PSH 150 Classic - STIEBEL ELTRON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSH 150 Classic by STIEBEL ELTRON.