BHE 100 Plus - Boiler STIEBEL ELTRON - Free user manual and instructions
Find the device manual for free BHE 100 Plus STIEBEL ELTRON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric boiler with domestic hot water tank |
| Brand | Stiebel Eltron |
| Model | BHE 100 Plus |
| Tank capacity | 100 liters |
| Electrical power | 2 kW |
| Supply voltage | 230 V single phase |
| Dimensions (H x W x D) | approx. 850 x 450 x 300 mm |
| Weight | approx. 30 kg |
| Mounting type | Wall-mounted |
| Tank material | Enameled steel |
| Frost protection | Yes, integrated |
| Electronic control | Yes, with adjustable thermostat |
| Safety valve | Included, set at 7 bars |
| Magnesium anode | Present, to be checked annually |
| Repairability index | Indicated on the product label |
| Spare parts | Available from the manufacturer and authorized dealers |
| Routine maintenance | Drain and check the anode every year |
| Cleaning | Exterior with a damp cloth, without abrasive products |
| Energy class | B (according to EU regulation 812/2013) |
| Noise | Less than 30 dB(A) |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - BHE 100 Plus STIEBEL ELTRON
How to install the Stiebel Eltron BHE 100 Plus water heater?
Installation must be carried out by a qualified professional. It must be wall-mounted on a load-bearing wall, connected to the water supply and to the 230 V electrical supply with a dedicated circuit breaker. Respect the safety distances indicated in the manual.
What is the electrical consumption of the BHE 100 Plus?
The power is 2 kW, which corresponds to a consumption of 2 kWh per hour of operation. Actual consumption depends on the set temperature and frequency of use.
How to adjust the water temperature?
Use the electronic thermostat located on the control box. Turn the knob to adjust the temperature between 30°C and 80°C. A temperature of 55-60°C is recommended to avoid legionella while saving energy.
What to do if the water does not heat up?
First check the electrical supply (circuit breaker) and the fuse. If the operating light is off, the heating element may be defective. Contact a technician. Do not attempt to repair it yourself.
How to maintain the BHE 100 Plus?
It is recommended to drain the tank once a year to remove limescale and check the condition of the magnesium anode. Replace the anode if it is more than 50% worn. Clean the exterior with a soft dry cloth.
What is the typical lifespan of the water heater?
With regular maintenance, the lifespan can reach 10 to 15 years. The enameled steel tank resists corrosion well, especially if the anode is changed periodically.
Does the BHE 100 Plus make noise?
No, the operation is silent (<30 dB). You may hear a slight clicking sound during heating due to expansion, which is normal.
Where to find spare parts?
Spare parts (heating element, thermostat, anode, valve) are available from the Stiebel Eltron after-sales service or authorized dealers. Use the reference indicated on the nameplate.
What is the recommended service pressure?
The service pressure must be between 2 and 6 bars. A safety valve set at 7 bars is supplied. If the pressure exceeds 7 bars, the valve releases water.
Can the water heater be used without water pressure?
No, the BHE 100 Plus is a pressurized water heater. It requires a water supply with a minimum pressure of 0.5 bar. Never operate without water to avoid damaging the heating element.
User questions about BHE 100 Plus STIEBEL ELTRON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual BHE 100 Plus - STIEBEL ELTRON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BHE 100 Plus by STIEBEL ELTRON.